QSA/AERB-C-Audi/23-24/NIT/38 dtd.14.02.2024

Amount

ABSTRACT OF COST

WORKS

Description of Work / Item(s)

Amount

Providing, supplying & fixing in position Nylon printed Broadloom Carpet with following Specifications: • Product- 100% Nylon Digitally Printed Carpet. • Structure-Tuted Loop Pile • Pile GSM- 800 GSM (± 5% ) • Total GSM-1991 GSM (± 5% ) • Pile Height- 6 MM (± 5% ) • Total Height-8 MM (± 5% ) • Gauge- 1/10 • Stiches /10 Cm- 32 (± 2% ) • Secondary Backing - PP Mesh Back. • Latex - SBR • Preferable roll size- 25 mtr x 4 mtr. • Flammability (Radiant Panel):Test Method: ASTM E 648 ≥ 0.45 (Class I) • Certification: - Make In India, CRI green Level Plus, and USGBC LEED. The detailed specifications are as following:-

The carpet shall be of approved make, shade, colour, pattern and manufacturer and including fixing to the existing flooring by providing & fixing 6 mm thick Fire Retardant rated PU (polyurethane) underlay with approved make Low VOC Adhesive for cushion backing and including providing & fixing second class melamine polished teak wood beading of approved size 25 x 15 mm to open end portion and exposed edges of the carpet securely position with floor by providing necessary adhesive, PVC fasteners and steel screws etc. in aisles/ gangways for carpet flooring including cost of all materials, labour, wastage, cutting, transporation, loading, unloding, adhesive etc complete all as per specifications, manufacturer's specifications and as directed by the Engineer-In-Charge. . (Note:- After installation, carpet to be covered with transparent polythene sheet and taping of joints with masking tape. Before hand over, polythene to be removed and Carpet should be vacuum Cleaned.)

Providing, supplying and fixing in position heavy duty, fully upholstered, ergonomically designed Auditorium chairs with desklet, Flexi back, gravity type, spring free auto tip up of approved make, shade, colour, pattern, manufacturer and including fixing the chairs in existing flooring using suitable approved heavy duty stainless steel anchor fastners of suitable dia & length, drilling hole, chemical grouting, finishing, labour and including cost of material, anchor fastner, chemical grout, drilling, wastage etc complete all as per specifications, manufacturer's specifications and as directed by the Engineer-in-Charge. Note:- (a) The sample of chair with all accessories shall be got approved by Engineer-in-Charge before making mass production. (b) The installer should ensure that no chair shall be loose and necessary arragments/correction if required in floor shall be done by agency without any additional cost. (c) Providing & fixing seat & row number in auto glow as per approved sample. (d) The agency shall prepare layout of chairs as actual dimensions of auditorium and submit for approval of EIC. The detailed specifications of auditorium chairs are as following:- The Chair seat assembly is made of polyurethane foam moulded with M.S. tubular frame insert which is upholstered with fire retardant fabric. The insert is tubular frame made of 1.9+-0.02cm x 0.16+-0.013cm thk MS. E. R. W. round tube with flexible support straps running across the length and width of the frame. The Seat has an auto-tipup feature making it stay in upright position when not in use enabling clear row passage. Seat Size: 45.5cm(W) x 46.5cm(D). The chair’s back assembly has flexi back mechanism. It’s made of polyurethane foam moulded with M. S. Tubular frame insert, upholstered with fabric and has a plastic back cover. The insert is tabular frame made of MSERW round tube with flexible support straps running across the length and width of the frame. Back Size: high back – 45.5cm (W) x 82.4cm (H). The HR polyurethane foam is moulded with density = 45 (+)/(-) 3 kg/m3. The fabric would be GSM is 185 +/- 5% with FR standard testing Specs: FMVSS 302.Acceptance criteria: 100mm / minute. The Chair rest on the ground on two side panel frames fabricated from 0.12+-0.020cm thk CR steel sheet which is cladded with fabric upholstery. The side panel frame is grouted to the floor using 2 nos. of anchors for each panel through 0.3+-0.05cm thk HR steel base plate. The detailed specifications are continued as below :-

The armrest is made up of solid beech wood with clear lacquer coat. The armrest is fitted with side panel through concealed zinc plated hinge. The deslket is made of prelaminated particle board (18 mm th) injection moulded poly propylene edging all around. The desklet top is mounted on high pressure die cast alumnium arm through metal bracket (2mm th) H.R. Steel. The assembly is mounted on side panel through desklet arm connector made of galss filled nylon. (Desklet ouet size 208 X 302 mm) Steel Components are epoxy polyester powder coated. The base plate used for chair is 0.3cm (+-0.05cm) thick HR Steel. Each base plate is grouted to the ground with 2 anchor bolts (Chemical depending on the floor). For fixing of chairs required nos. of stud bolts/washers, consumable material and MS material is part of supply & installation. Number plate should be provided on each chair back side with proper fixing. Chair number plate should be of SS304, 1.5 to 2 mm thk, minimum size 30 mm X 60 mm either oval or rectangular shape. Alpha numeric numbers ( e.g A-1 to O-1…… A-26 to O-26) to be embossed, number height should be between 15-20 mm and number colour should be black or contrast colour to chairs fabric.

Providing, supplying & fixing in position the following stage curtain system including all material, labour etc complete all as per specifications, drawings and as directed by the Engineer-in-Charge.

Providing & fixing in position main curtain to the stage of auditorium, made out of fire retartant velvet curtain cloth of approved colour and shade with horizontal/vertical sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton), 2 nos. air breaker contractors (L&T/Siemens), 2 nos. micro switches for auto stop, 3nos. push buttons for forward reverse & stop positions. The curtain should be draped to half area when in closed position with minimum overlap at centre should be 900mm in case of horizontal sliding and should be in stitched in double gathering with complete as per specification, drawing and as directed by the Engineer-In-Charge. App. Size 11500 × 6500(H)mm. (Note :- The quoted rate shall include cost of all accessories, fixing arrangement and tools, tackels, scaffolding, wastages, labour, commissioning etc. complete with all respect).

Providing & fixing in position centre curtain to the stage of auditorium, made out of fire retartant glazed cotton curtain cloth of approved colour & shade with horizontal sliding arrangements complete with fixing rails, brackets, sliding arrangemetns & motorised operation complete with runners, master runners, pullies, 3mm steel iron rope, 1 HP motor (Crompton), 2 nos. air breaker contractors (L&T/Siemens), 2 nos. micro switches for auto stop, 3nos. push buttons for forward, reverse & stop positions. The curtain should be draped to half area when in closed position with minimum overlap at centre should be 900mm and should be in stitched in double gathering etc. all complete as per specification, drawing and as directed by the Engineer-In-Charge. App. Size 10500 × 6500(H)mm. (Note :- The quoted rate shall include cost of all accessories, fixing arrangement and tools, tackels, scaffolding, wastages, labour, commissioning etc. complete with all respect).

Providing & fixing in position Rear curtain to the stage of auditorium, made out of fite retartant glazec cotton curtain cloth of approved colour & shade with horizontal sliding arrangements complete with fixing rails, brackets, sliding arrangemetns & motorised operation complete with runners, master runners, pullies, 3mm steel iron rope, 1 HP motor (Crompton), 2 nos. air breaker contractors (L&T/Siemens), 2 nos. micro switches for auto stop, 3nos. push buttons for forward, reverse & stop positions. The curtain should be draped to half area when in closed position with minimum overlap at centre should be 900mm and should be in stitched in double gathering etc. all complete as per specification, drawing and as directed by the Engineer-In-Charge. App. Size 9500 × 6500(H)mm. (Note :- The quoted rate shall include cost of all accessories, fixing arrangement and tools, tackels, scaffolding, wastages, labour, commissioning etc. complete with all respect).

Providing & fixing in position to auditorium stage plastic perforated cyclorama screen of M/s. Galalite or approved equivalent including providing & fixing tubular frame made our 40mm Dis. MS Pipe & Cross GI pipe 25mm dia. etc. all complete as per manufacturer specification, drawing and as directed by the Engineer-In-Charge. App. Size 9500 × 6500(H)mm. (Note :- The quoted rate shall include cost of all accessories, fixing arrangement and tools, tackels, scaffolding, wastages, labour, commissioning etc. complete with all respect).

Providing & fixing in position cloth wings to the stage of auditorium, made out of fite retartant black glazed cotton cloth of approved quality fixed on 6mm thick marine plywood fixed on both sides of MS 50MM×25MM×16GI pipe welded framework. The pipe framework made out of 25×50mm pipe C/C 900×900 mm fixed with overhead pivote track complete with duly painted on both framework etc. all complete as per specification, drawing and as directed by the Engineer-In-Charge. App. Size 1500 × 6500 mm. (Note:- The quoted rate shall include cost of all accessories, fixing arrangement and tools, tackels, scaffolding, wastages, labour, commissioning etc. complete with all respect).

Providing & fixing in position average frills to the stage of auditorium, made out of fite retartant glazed cotton curtain of approved colour & shade installing above the stage on 28mm dia. GI pipe framework etc. all complete as per specification, drawing and as directed by the Engineer-IN-Charge. App. Size 11500 (AV) × 1500 mm.

M.S. pipe ladders to be provided on sided of the stage to be fixed on the existing GI pipe or top grid. Made of 50×25 mm MS pipe of following size: App. Size 600×1800 mm. Rate is inclusive of suitable suspended arrangements for pull up & pull down system for these ladders from top, etc. all complete as per specification, drawing and as directed by the Engineer-IN-Charge.

Motorised free Bars made out of 50mm dia. MS pipe with pulleys, GU Wire rope, Gear Box, Contractor, Limit Switch, Push Button, Wiring, etc. all complete as per specification, drawing and as directed by the Engineer-IN-Charge.

Classic enterprises

P. K. Enterprises

Classic enterprises

P. K. Enterprises