Tirupathur District RRGSA - 2025-2026 CONSTRUCTION OF CO LOCATION OF CSC WITH PANCHAYAT BHAVAN IN S.PALLIPATTU H/O S.PALLIPATTU.Package No.01

Amount

CONSTRUCTION OF CO LOCATION OF CSC WITH PANCHAYAT BHAVAN IN S.PALLIPATTU H/O S.PALLIPATTU.

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and errection of centering for sides and soffits with M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete

Columns

Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.

Cement Concrete 1:2:4 (One Cement, two crushed stone M.Sand and four hard broken stone jelly) using 10 to 12 mm gauge hard broken granite stone jelly for Terrace flooring including water proof compound, laying, finishing, curring etc complete with standard specification and as directed by the departmental officers

Supply and painting the Terrace floor with two coats of Epoxy paint as instructed by the departmental officers including preparation of surface curing , etc, complete in all floors complying with standerd specifications.

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering M.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of paint and all labour charges etc complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of paint and all labour charges etc complete

Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fabrication of the following steel doors including cost and conveyance and all charges etc complete.

steel door d1

Steel Window

Painting two coats using with approved oil bound distember paint including cost and conveyance of paint and all labour charges etc complete

Painting two coats using ready mixed Plastic Emulsion paint including cost and conveyance of paint and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Painting and lettering of Name board

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

M Perumal (BID ID -1423537)