REPAIR TO CERTAIN ROAD, ROAD FURNITURE, KERB STONE AND PATHS IN THE AREA OF SEKHON VIHAR AT AF STN PALAM UNDER GE (P) AF GURGAON

Amount

M&L for repair to pot holes any depth not exc. 4.0 Sqm each including sweeping, free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth making good by applying tack coat with VG-10 paving bitumen @ 5Kg per 10 Sqm, putting in screened & graded road metal and rolled with vibromix road roller, watering and well ramming (including supply of road metal), complete all as specified and directed.

M&L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with mechanical brooms and remove all loose dust etc. with air compressor and applying evenly a priming/tack coat with paving bitumen VG-10 @ 5Kg per 10 Sqm complete all as specified and directed.

M&L for 30mm consolidated thick semi dense asphaltic concrete with @5.50 % paving bitumen (VG-30) Gde by weight of total mix of asphaltic concrete, rolled and compacted to required camber and gradient, mixing is carried out in mechanical hot mix plant and laying, spreading and rolling with 8 to 10 tonne power vibromax/Tandom road roller to required level, gradient, camber and super elevation complete all as specified and directed. Note : (i) The work shall be Strictly carried out by using mechanical/Sensor paver only. (ii) The work will be allowed only after approval of Semi Dense Asphaltic Concrete Design Mix (iii) Contractor should arrange bitumen extraction Test at site during execution of SDAC work. (iii) No price adjustment shall be applicable if excess quantity of binder content (paving Bitumen VG-30) is used / approved as per job mix formula in the execution of work under this item.

M&L for painting lines, dashes, arrows, letters etc on roads pavement by using reflective thermo plastic paint confirming to BS:3262 (5Kg/Sqm) with glass beads potters (250 gms) 2.00 to 2.5mm thick and 10 cm/15 cm wide strips on bituminous road surface and road marking (by Hot Mechanical process with Road Marking Machine) including complete removal of dust particle by wire brushes or sweeping with brooms complete all as specified and as directed

Demolition of cement concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from site(s) complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching, kerbs, coving etc complete all as specified and as directed.

M&L for ready made PCC (1:2:4) type B1 kerb stone of Size 600x150x300mm with rounded edge fixed in position and pointed in cement mortar 1:4 and finished exposed surface even and smooth complete including taking out old unserviceable kerb stone of any description complete all as specified and directed.

S & F in repair reflective road studs of size 100X120x20mm minimum weight 130 gms most effective night guidance even under the most adverse weather condition Top quality dynamically designed studs having excellent quality standards ,can bear load upto 25 tonnes. The studs are visible and can also be hard and flat, due to the rumble when a vehical crosses over them, road studs in different colour to delineate both the carriage way at the center and at the edges of roads made out of in rigid ABS plastic. The special impacts, specific reflective panel of studs provides very night reflectively incl epoxy for fixing in position allas specified and as directed . Make : Road star/sinor/STC/3M/Suneyez/Darkeye

S&F in repair solar studs of size 125X125X25 mm made from aluminium alloy and construction solar powered by nanocrystal solar panel type with rechargable battery minimum 2.5V , 500 mah, LED both sides (3 each side) display colour red. Visual distance approx 800 mtr in working temperature (10 degree to 70 degree centrigrade) with starting intensity 300 Lux to 600 Lux . Minimum approx weight 900 gms , water resistance made up high compressive material can sustain over 10 tonnes with one year replacement warranty incl epoxy for fixing in position complete all as specified and directed . Make :Road Star/Sinor/STC/Kohinoor /3M/ Suneyez/Dark eye

S&F Sign board made out of 3mm thick APP (Aluminium composite panel sheet) fixing on stainless steel pipe . writing English/Hindi Radium/Reflective letters not less than 20cm height with lvory blue base background and white computerised letter reflective on 3m retro reflective sheet high quality including taking down existing board complete all as specified and directed.

S&F Vehicle caution board made out of stainless steel tube of Gde SS-304 of required size and shape including cutting, SS welding, necessary buffing, fixing on ground as required and finishing the surface complete all as specified and directed.

DR Buildcon