The work of laying of OH XLPE Cable in populated area and replacement of Damaged/Jarjar Conductors of 11 KV Nawab Tank, Pachanehi Feeders etc. under EUDD, Banda (Business Plan 2024-25)

The work of erection & repairing of 11 KV Lines and replacement of damaged electrical parts of damaged/jarjar OH Lines of 11 KV Nawab Tank Feeder & Pachnehi Feeders & Laying of OH XLPE Cable in populated areas UNDER BUSINESS PLAN YEAR 2024-25 under EUDD, BANDA, including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Details of the work as given below :-

SUPPLY OF MATERIAL -

Stone Pad

Cross Arm Holding Clamp with Nut-Bolts for STP 11 M Long

11 KV F-Clamp wih Nut-Bolts for STP Poles 11 M Long

MS Top Channel

MS Dropper Channel

Clamp with Nut-Bolts for Channel

MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts.

MS T-Off Channel

Danger Board with clamp & Nut/Bolt

Number Plate with clamp & Nut/Bolt

GI Holding Clamp for XLPE Cable support

Jointing Sleeves

Alluminum Paint

Red Oxide Paint

PG Clamp for Dog

Guarding Angle with Clamp & nut-bolts

Nut, Bolt & Washer of suitable sizes

ERECTION WORK -

Erection & fixing of Stone Pad

Erection & fixing of ST Pole 11.0 Mtr. Long as single/double pole structure with HT/LT fittings.

Erection & fixing of 11 KV V Type Cross Arm

Erection & fixing of Cross Arm Holding Clamp with Nut-Bolts for STP 11 M Long

Erection & fixing of 11 KV F-Clamp wih Nut-Bolts for STP Poles 11 M Long

Erection & fixing of MS Top Channel

Erection & fixing of MS Dropper Channel

Erection & fixing of Clamp with Nut-Bolts for Channel

Erection & fixing of MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts.

Erection & fixing of MS T-Off Channel

Erection & fixing of 11 KV Pin Insulator

Erection & fixing of 11 KV Pin with nut

Erection & fixing of Disc Insulator

Erection & fixing of Disc fitting

Laying, sagging, stringing, binding and jumpering etc. of ACSR DOG Conductor on the erected pole as per direction of supervising engineer/RESSPO manual.

Hanging cable (3x185 Sq.mm.) with support of GI Wire of appropriate strenght in such a manner that cable does not get stressed i.e. to be clamped and hanged at many support.

Erection, filling & fixing of Cable Jointing Kits

Erection & fixing of Number Plate with clamp & Nut/Bolt

Erection & fixing of Danger Board with clamp & Nut/Bolt

Erection & fixing of GI Wire 8 SWG for guarding

Erection & fixing of Stay Wire 7/10 SWG for supporting of cable

Erection & fixing of GI Holding Clamp for XLPE Cable support

Erection & fixing of Jointing Sleeves

Painting of pole structure by Alluminum Paint

Painting of pole structure by Red Oxide Paint

Erection & fixing of PG Clamp for Dog

Erection & fixing of Guarding Angle with Clamp & nut-bolts

Erection & fixing of Stay Set Complete

EARTHING OF POLE BY EARTHING ROD

Concreting/Grouting of erected 8.5/11 Mtr. long PCC/STP Poles with muffing as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast /stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

Straightening of tilted poles as 8.5/11 Mtr. Long PCC/ST Pole at various places.

Re-sagging of loose conductor of 11 KV HT/LT lines at various places.

Dismentalling of line material/poles and deposit to central store.

M/s. V.K. CONTRACTOR