Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹13.4 L+₹75,975 (5.99%)Rejected-Finance FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹14.0 L+₹1.3 L (10.1%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹15.0 L
EMD Value
₹30,000
Closing Date
4 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2024_MES_640928_1
86960/E8
Open Tender
Civil Works
Item Rate
180 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE DEOLALI
₹30,000
Yes
16 Mar 2024
6 Feb 2024
6 Mar 2024
6 Feb 2024
4 Mar 2024
20 Feb 2024
7 Feb 2024 - 13 Feb 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed
Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean , hard strong, dense non-porous and durable pieces of crushed stone o gravel, fine aggregates of clean natural sand o crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width , including curing and tining by Texturing cum Curing Machinecomplete all as specified and directed. Required surface texturing to be done as specified in Clause- 10 1 14 and Tabl~ 9 of IRC' 15-2017
M&L Epoxy Polyurethane Coating (EPU) Supplying and applying ESD Ployurethane Flooring System as per the following Specification:- (a) Surface preparation: preparing the existing surface of floor by using proper scarification eqpt and cleaning by wire brushing & blow etc, to remove all dirt, dust, oil etc to expose clean sound base concrete. Cost shall include any imperfections in the concrete shall be treated with suitable repair system as per manufacturer specification. Note:- (i) Material /Chemicals required for repairing crack, potholes and damaged areas shall be paid separately at supply only rates. (ii) Treatment of construction and expansion joints including filling as per manufacturer's specification and direction of Engineer-in-Charge, which shall be paid separately. (b) Primer: Supply and application of moisture insenstive solvent free epoxy bonding primer over the prepared surface (Floor/coving) in a thin continuous film and work the Primer into the surface using a stiff brush or roller. Apply second priming coat on identified light colored dry patches over first coat.
(c) Base Coat/Scratch Coat : Supply and application of 1mm thick base layer with cementitious Polyurethane of self smoothing self levelling epoxy underlay spread evenly to maintain the thickness using a serrated trowel followed by spike roller, rolled over the levelled underlay to remove any entrapped air all as per manufacturer instructions and as specified. (d) Anti Static grid : Supply and fix copper earth strip of size 25mm wide and 80 micron thick, fixed over the floor area along the perimeter and internally with a grid size of min 3mx 3m and max 5m between strips. The Surface shall be treated with aqueous anti static epoxy system, conductive under coat spread as specified and as manufacturer's instructions. The conductivity of the under coat shall be 2 x10^3 ohms - 4x 10^3 ohms. The entire system to be connected to earth pit AND testing complete. (e) Epoxy Polyurethane Coating (EPU): Providing 3 mm thick epoxy polyurethene ESD flooring, having 28 days compressive strenght as per ASTM C 109 45MPa, Flexural strenght will be 12 MPa as per BS 6319-3, Tensile strength will be 4MPa as per BS 6319-7, having surface of earth resistance < 1 x 160 Ohms. The fire resistivity of the material has to be of class 2 as per BS 476-7. Make:- FOSROC / SIKA/ STP / CHOKSEY/ASIAN/ TIKITAR / DANOSA
Supply only material /Chemicals required for repairing crack, potholes and damaged areas as per manufacturers speccfications.
Racking out of old existing expansion joint sealant compound, back up rod and filler board of the existing joints by specia tools like racker/cutting blades/machines , widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant Thereafter filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified , over it filled with closed cell medium density, cross linked polyethylene foam backup rod of 30 mm dia for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of+/- 30%
Racking out of old existing construction joint sealant compound and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm y using joint cutting blades of appropriate size straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris . Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant Thereafter filled with closed cell medium density, cross linked polyethylene foam backup rod of 12 mm dia for complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of+!- 30%.
Racking out of old existing dummy joint sealant compound and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant. Thereafte filled with closed cell, medium density, cross linked polyethylene foam backup rod of 8 mm dia fo complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875- 2003 with minimum movement accommodation factor (MAF) of+!- 30%.
M&L for nosing the damaged edges of the construction joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed.
M&L for nosing the damaged edges of the expansion joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed.
M&L for gangway yellow line marking not exc 150 mm wide in in floors. Fixing of masking tapes on both sides of line, cleaning the surface using solvents, mixing two components high build coating in two coats of 0.50mm (min) thickness each and removing masking tapes followed by neat finish as directed.
Abhiraj Enterprises
Ranmale Developers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .