SPECIAL REPAIRS TO BLDG NO. T-24 OF SATA REGT AT NLP MIL STN AND SPECIAL REPAIRS TO BLDG NO. T-5 OF SATA REGT AT NLP MIL STN AND PROVN OF DEFICIENT GEYSER FOR TRANSIT CAMP AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a distance exc. 50.00 Metre and not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Reinforced Cement Concrete in any Position not otherwise specifically provided for and Removing Debris, etc. to a distance exc. 50.00 Metre and not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and Over in Section in Unframed Work, complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and Over in Section in Framed Work, complete all as specified and as directed.

Dismantling Timber Boarding of any description in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlins, etc. Under 40 Sq Cm in Section in Unframed Work, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/ Worn out Wire Cloth/Netting of any descrip-tion, fixed with Beads, etc., complete all as specified and as directed.

Hacking out Old Broken Glass (any thickness, Size, quality or description) from Wooden or Metal Frame or Stone, Concrete or Brick surrounds including Hacking out Old Putty or Removing Beads, etc., Punching or Drilling out Old Glazing Pins/ Spring Clips, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheet or Galvalume Steel Sheet of any gauge and thickness, complete all as specified and as directed.

Dismantling Asbestos Cement (Corrugated or Semi-corrugated) Sheets in Roof Coverings, etc. of any thickness including Nainital or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as directed.

Dismantling Ceiling Frame (Snap Grid) with Hangers (but except Boards) of any descriptions, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a distance exc. 50.00 Metre and not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, hacking for Key, Scrubbing down with Water and Removing Debris, etc. to a distance exc. 50.00 Metre and not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Dismantling/ Lowering down Unserviceable Water Storage Tank exc. 500 Litre but not exc. 1000 Litre Capacity of any description after disconnecting of Water Supply Connections including Float Valve, complete all as specified and as directed.

Taking up or down PVC (SWR) Soil, Waste and Ventilating Pipe 75/110mm bore (dia) with Fittings of any description from any Situations, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 60 Cm in Height, Apex Stones, Bed Plates, Copings, Kneelers, Kerbs, Water Troughs and the like including Weather-ing, Slightly Rounded or Chamfered Angles & Throating and necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork is deemed to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Landings, Drain Cover Slabs, Manhole Cover Slabs, etc., Set in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured & Paid separately under relevant Item.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks) but except Bricks (Serviceable Bricks obtained from Item No. 1.003 here-in-before including Cleaning Bricks by Removing Mortar and all Extra Handling), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work Half Brick thick with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Holes in Brick/ Pre-cast Concrete Block Walling, not exc. Half Brick thick, built in Cement Mortar for Taking out or Inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregates) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Chases, Pinning in, Making Good to facings where required and Pointing in Cement Mortar 1:3 to Ends or Edges of Cills, Shelves, Lintels, etc., and Cutting Chases for Concealed Water Tubing and Making Good, Cutting Girth not exc. 10 Cm, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Scantling in Timber Framed & Fixed (Trusses, etc.), Cleanswan, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Scantling in Timber Fixed as Unframed Work, Wrought, fixing in any Position, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Timber Boarding 40mm thick in Wall Panelling, One Side Planned, fixed in any Position and secured with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) One Side Planned Fillets, Square, Rect-angular or Triangular in Section, secured with Nails, Cross Sectional Area exc. 13.00 Sq Cm but not exc. 25.00 Sq Cm (50x50mm), complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed.

S&F Flush Shutter 35mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 35mm thick, Open Rebated and Prepared to receive Glass, Gauze, etc. (Without Sash Bars), Edges of Framing Plain, Chamfered or Rounded. fitted with Cut and Mitred Beads for securing Glass, etc.; Sizes of Members of Shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open Rebated and Prepared to receive Glass, Gauze, etc., Divided into Squares, with Plain, Chamfered or Rounded, Mitred and Rebated Sash Bars (any numbers), fitted with Cut and Mitred Beads for Glass, Gauze, etc., Sizes of Members of Shutters as specified in MES Schedule Part-I, Section 8, Clause No. 8.24(b) and fitted to Chowkats, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each and Re-fixing in the Same Opening including Cutting to Size and Fitting, complete all as specified and as directed.

S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of Cross Section 90x45mm having Single Rebate of 32x15mm to receive Shutter of 30mm thickness. The laminte shall be moulded with Fire Resistant Grade Unsaturated Polyester Resin and Chopped Mat. Door Frame laminate shall be 2.0mm thick and shall be filled with suitable Wooden Block in all the Three Legs. The Frame shall be covered with Fiber Glass from all Sides. Mild Steel Stay shall be provided at the Bottom to steady the Frame all as specified by the Manufacturer, complete all as specified and as directed.

S&F Glass Fibre Reinforced Plastic (FRP) Panelled Door Shutter 30mm thick of required Colour and Approved Brand and Manufacture, made with Fire Retardant grade Unsaturated Polyester Resin, moulded to 3.0mm thick FRP Laminate for forming Hollow Rails and Styles with Wooden Frame and suitable Blocks of Seasoned Wood inside at required Places for fixing of Fittings, Cast Monolithically with 5.0mm thick FRP Laminate for Panels conforming to IS:14856 including Fixing to existing Door Frames, complete all as specified by the Manufacturer, complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Sliding 2-Track Window, 2 Shutter Series B (SHUTTER SECTION - 18mm) with Two Glazed Shutters Each Covering Half Opening including Self Closing Locking Arrangement, Stoppers and Rubber Beading Gasket Without Sash Bars, Auminum Section Weighing 1.06 KG/RM including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Powder Coated Aluminum Beading, Screws, etc. including Anodised Aluminium Fittings in Each Shutter and fixed with 'C' Channel, complete all as specified and as directed. NOTE : Cost of Builders Hardware as mentioned are deemed to be included in the Quoted Unit Rate. However, Glazing and Wire Mesh will be Measured & Paid separately against respective Items.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Sliding 3-Track Window, 2 Shutter Series B (SHUTTER SECTION - 18mm) with Two Glazed Shutters Each Covering Half Opening including Self Closing Locking Arrangement, Stoppers and Rubber Beading Gasket Without Sash Bars, Auminum Section Weighing 1.06 KG/RM including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Powder Coated Aluminum Beading, Screws, etc. including Anodised Aluminium Fittings in Each Shutter and fixed with 'C' Channel, complete all as specified and as directed. NOTE : Cost of Builders Hardware as mentioned are deemed to be included in the Quoted Unit Rate. However, Glazing and Wire Mesh will be Measured & Paid separately against respective Items.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Ventilator, Openable, Top Hung and Bottom Portion Fixed type Without Sash Bars with Aluminium Section Weighing 0.55 KG/RM including Glazing, necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws and Top Hung Shutter Fixed Hook & Eye with Minimum 01 No. on Each Shutter, 01 No. Aluminium Tower Bolt 100mm Long and Aluminium Handle 75mm Long in Each Shutter, complete all as specified and as directed. NOTE : Cost of Builders Hardware as mentioned are deemed to be included in the Quoted Unit Rate. However, Glazing and, Wire Mesh will be Measured & Paid separately against respective Items.

S&F Aluminium anodised Barrel Tower Bolt of Size 150mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt of Size 200mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy anodised Sliding Door Bolt 250mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed.

S&F Aluminium anodised Handle of Size 125mm, Cast type, complete all as specified and as directed.

S&F Aluminium anodised Handle of Size 150mm, Cast type, complete all as specified and as directed.

S&F Floor Door Stopper having Overall length of Cover Plate 75mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixing in Floor and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Curtain Rail/ Rod 24/25mm Dia with and including Stainless Steel Decorative Finials with Stainless Steel Brackets and fixed on Walls, etc. and Fixed-in-repairs, complete all as specified and as directed. NOTE :- (a) Stainless Steel Decorative Finials and Stainless Steel Brackets will be provided for Each Length of Curtain Rail/ Rod and Cost of the same will deemed to be included in the Quoted Unit Rate. (b) Only Length of Curtain Rail/ Rod will be Measured for Payment.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick, Plain Ordinary quality, not exc. 0.50 Sqm in Each Pane and Glazing with Oil Putty in Wooden Framed Work, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Plain Ordinary quality, not exc. 0.50 Sqm in Each Pane and Glazing with Aluminium Bedding and Rubber Gasket in Aluminium Framed Work, complete all as specified and as directed. NOTE : Cost of Aluminium Bedding and Rubber Gasket as required will deemed to be included in the Quoted Unit Rate against Item No. 1.045 to 1.047 here-in-before.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts (if required), Heavy Hooks (Stay) for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Chains; Hand Made Sliding Bolts; Clamps; Holdfasts (Flat Iron 25x4.0mm); Wall Ties; Hooks for Hanging Fans; Plain Angle Cleats for securing Purlins to Wood Trusses or Rafters; Knee Piece inserts; 2-way and 3-way Straps, Plate Washers and Similar Small Articles, conform to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Mild Steel Framed Brackets of Angles or Tees with Web and Flanges, cut to Shape, drilled and countersunk for Screw including bending and welding Angles as necessary, Gusset Plates, Riveting, etc., not exc. 10 KG Each Brackets, conforming to Fe-290, Gde E-165, complete all as specified and as directed.

M&L Mild Steel Tubular Trusses, etc. including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Aluminum Anodised Snap Grid/ Frame Work of Size 605x605mm in Ceiling, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed.

S&F Hangers 4.0mm dia GI Wire (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 595x595x4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.

S&F Plywood 6.0mm thick, BWP Grade, Type BB, fixed with Screws to Timber Frame Work, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles (1st quality and as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles, Joint Free (1st quality and/as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles, Joint Free (1st quality and as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Glazed Ceramic Coloured Tiles 300x600x7.0mm thick (1st quality and/or as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Bitumastic Filling comprising 1 Part of Bitumen of Grade 85/25 and 2 Parts of Sand by Weight, complete all as specified and as directed.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Old Plastered Surfaces of Walls and applying Two Coats of White Wash, complete all as specified and as directed.

M&L Preparing New or Old Plastered Surfaces of Walls and applying Wall Care Putty 1.5mm thick including Cutting and Rubbing down to obtain an Even and Smooth Surface, complete all as specified and as directed.

M&L Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat) on Putty Finished Surfaces, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing Old Plastered Surfaces of Walls by Complete Removing Existing Surface Treatment and applying Two Coats of Cement Based Paint (of approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, exc. 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Treated Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and Applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing New or Previously Treated Surface of Wood and Wood based Materials of any description and girth and treated with Two Coats of Creosote Oil, complete all as specified and as directed.

M&L Preparing Previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.

M&L Preparing Previously Untreated Surfaces of any description and girth not other-wise described and Treating with Tar or Coal Tar Black Paint to Holdfast or Similar Small Items, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, Quarter Turn (Form Flow), screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/ Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing Water Connections with and including GI Tank Nipple 20mm (02 No. in Each Tank), complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Gram, high pressure, Epoxy Coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.

M&L Vitreous China White Squatting Pan of Size 580x440mm, Orissa Pattern having Integral Foot Rests with and including PVC (SWR) ‘P’ or ‘S’ Trap, Providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium Plated Jet Spray (as approved) with Connection Pipe 15mm bore (dia) and suitable for Wash Down Water Closet Pan (Pedestal Pattern) and Fixed-in-repairs, complete all as specified and as directed.

S&F Toitet Paper Holder of Size 150mm (as approved), Brass Chromoum Plated with Rod to hold Paper Roll and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 550x400mm in Size, Flat Back with Brass Chromium Plated Waste Coupling/ Fitting 32mm bore (dia) of 80mm Long and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly Painted, Cutting and Pinning in Ends and Fixed including Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Waste Fitting 32mm bore (dia), Brass Chromium plated, for Glazed Ware Sinks, Basins, etc., with long screwed Shanks and Fly-nuts, Flange End, Bedded in Red Lead Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Urinal, Half Stall type with Brass Chromium plated Waste Coupling 32mm bore (dia), (excluding Flushing Cistern, Flush Pipe and Waste Pipe), complete including Providing and fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe) and Fixed-in-repairs, complete all as specified and as directed.

S&F Urinal Spreader of PTMT any Colour for fixing with 15mm dia (bore) GI Pipe having Minimum Weight 60 Grams) and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm bore (dia) of length not less than 900mm (as approved), suitable for Wash Hand Basin, Urinal, Sinks, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Shower Rose of Size not less than 125mm (as approved) with Shower Arm and Swival Joint, Chromium Plated including fixing to Steel Pipe 15mm bore (dia) and Fixed-in-repairs, complete all as specified and as directed.

S&F Soap Dish, Size not less than 150mm (as approved), Chromium Plated, fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and including Brass Chromium plated Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Single Socketed, in any length with Rubber Ring Joints, laid in Trenches, etc., complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, etc., complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any Radius, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm Junction, Single (Single T), Equal or Unequal), with Oval Access Door, Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia) and Jointing with Solvent Cement, complete all as specified and as directed.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregates), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down carefully Copper Point Wiring (Light, Fan, Socket or Power) of any description complete from in any Position including Fixture, Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets but excluding Light Fittings of any description, Making Good Disturbed Surfaces of Walls/Ceillings, etc in Cement Mortar 1:3 including providing Surface Treatment (White/Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including Providing Surface Treatment (White/ Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch/ Bell Push 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SWITCH SOCKET COMBINATION 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deemed to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for looping, etc. will deemed to be included in the Quoted Unit Rate.

S&F PVC Rectangular Board/Block of Size 100x100x50mm Deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of Size 175x100x50mm Deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Rectangular Board/Block of Size 250x200x50mm Deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Piano obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Socket Outlet obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Switch Socket Combination 16 Amp, 3 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 16 Amp, 3 Pin, Multi-plug, 5-in-1, Multi-purpose, Flush type with Fuse & Neon Indicator, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Socket Combination obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Ceiling Rose obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Ceiling Fan Regulator, Stepped type, Electronic, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Ceiling Fan Regulator obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F LED Bulkhead Light Fitting 1x10 Watt with LED Light Driver Holder and Connecting up with Flexible Copper Conductor Cable, 3 Core of suitable Size and Length from Ceiling Rose to Light Fitting including Taking down Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 220 Volt AC, Wall mounted, Decorative Box type with Driver, Holder including LED Tube, Wall mounted and Connecting up with Flexible Copper Conductor Cable, 3 Core of suitable Size and Length from Ceiling Rose to Light Fitting including Taking down Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Luminaire 600x600mm 40/42 Watt, (3000K to 6000K), 220 Volt AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders and LED Lamp suitable for Roof Ceiling and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down Unserviceable Light Fitting, complete all as specified and as directed.

Taking down Ceiling Fan, Exhaust Fan of any Make and Sweep from any Height after disconnecting Electric Connection and Keep in Safe Custody for Re-fixing / Re-hanging, complete all as specified and as directed.

M&L Mild Steel Flat Iron 40x5mm in Fan Hook, Cut to Length, bent to Shape as ordered, drilling holes for Bolts including providing Mild Steel Bolts, Nuts and Washers, conforming to Fe-290 Gde-E-165 including Taking down Unserviceable Fan Hook of any description, complete all as specified and as as directed.

M&L Re-hanging Ceiling Fan or Re-fixing Exhaust Fan (obtained from Item No. 2.020 here-in-before) and Connecting with and including suitable Size Twisted Flexible Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.

S&F Wall Fan 400mm Sweep, 1360/1400 RPM, Swing type, Single Phase, 45 Watt, 230 Volt with Fixing Arrangement using Fastener including Taking down Unserviceable Wall Fan of any description from any Situation and Removing to AGE E/M Store Yard at NLP, complete all as specified and as directed.

S&F Exhaust Fan 300mm Sweep, 1360/1400 RPM, Metallic Body with Louvers Shutter, 230 Volt, 50 Hz, Copper Winding with Fixing Arrangement using Fastener, Connecting up with and including of suitable Size and Length Flexible Copper Conductor Cable, 3 Core includ- ing Taking down Unserviceable Exhaust Fan of any description from any Situation and Removing to AGE E/M Store Yard at NLP, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB of any description, complete all as specified and as directed.

S&F MCB 10 Amp to 32 Amp, Single Pole & Neutral, 'C' Curve, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down/out Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregates) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregates), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out Unserviceable Earthing of any description, complete all as specified and as directed.

Taking down/out Unserviceable PP-R Pipes of any Size and any description from Trenches, Floors, Walls, etc. after Disconnection, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Disconnecting & Taking down/out Unserviceable LT Cable of any Size and any description from Trenches, Floors, Walls, GI Pipes, etc. incuding Serviceable (if any) Cables, Bricks/Cable Protection Cover, etc., complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and/or Laying of UG Cables, Water Pipes Lines, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the UG Cables, Water Pipes Lines, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

Supply & Installation Electric Water Heater (Geyser) of Capacity 25 LITRE Storage type, Steel Body with Copper Inner Tank and Heating Element upto 2.0 KW, BEE 5 Star rated complete with All Accessories such as Safety Valve, Thermostate, NRV, etc., fixing to Walls including Providing necessary Water Connections and Testing, complete all as specified and as directed.

S&F Flexible Stainless Steel Connection Tube/Pipe 450mm in Length with Stainless Steel Nuts suitable for Hot & Cold Water Connections to Water Heater (Geyser), complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 25mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 32mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.

M&L Drilling and Tapping GI/PP-R Water Mains (in Position) for Branch Connections of Size upto 32mm Internal dia Pipes, complete all as specified and as directed.

Supply, Laying & Testing XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

Supply, Laying & Testing XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 16 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Sand Cushioning (dry) in Trenches/Ducts for Protection of UG Cables (below, above and around the UG Cable laid) of 230mm Spread thickness (8.0mm in Depth before laying the Cable and 150mm in depth after laying the Cable) and Consolidated (Punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & Laying Sub-class ‘B’ Bricks of Size 230x115x75mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M/S JUBARAJ GOGOI

Ms Jahnabi Construction

M/S RAJA CONSTRUCTION

B S ENTERPRISE

ANZ CORPORATION

MOINUL HOQUE CHOUDHURY

M/S SINGH TRADERS