Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 CrAccepted-AOC NO 15 3 BREEZE APARTMENT SERVICE ROAD NOLAMBUR CHENNAI 600037 | CHENNAI | TAMIL NADU | 600037 | ₹12.6 Cr | L1 | Accepted-AOC The 2nd lowest and negotiated tenderer |
| 2 | L2₹12.6 CrRejected-Finance | ₹12.6 Cr | L2 | Rejected-Finance Not eligible for this work |
| 3 | L3₹12.6 CrRejected-Finance W BLOCK OLD NO 479 NEW NO 1 III AVENUE ANNA NAGAR WEST EXTENSION CHENNAI 600 101 | CHENNAI | TAMIL NADU | 600101 | ₹12.6 Cr | L3 | Rejected-Finance Higher rate tenderer |
| 4 | L4₹13.1 CrRejected-Finance CHENNAI 600 095 | CHENNAI | TAMIL NADU | 600001 | ₹13.1 Cr | L4 | Rejected-Finance High rate tenderer |
Tender Value
Refer Docs
EMD Value
₹7.5 L
Closing Date
10 Apr 2023, 6:00 pmClosed
Superintending Engineer/CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10.
Construction of 3 Nos. of SFO and 50 Nos. of Firemen Quarters for Fire and Rescue Service Station at Palavoyal Village, Redhills in Thiruvallur District (Chennai Sub Urban)
2023_TNPHC_297941_1
SE/CC/DB/3302/2021
Open Tender
Civil Works
330 days
Redhills in Thiruvallur District
Construction of 3 Nos. of SFO and 50 Nos. of Firemen Quarters for Fire and Rescue Service Station at Palavoyal Village, Redhills in Thiruvallur District (Chennai Sub Urban)
9 documents required · 9 mandatory
₹0
₹7.5 L
Yes
2 Sept 2023
28 Mar 2023
12 Apr 2023
28 Mar 2023
10 Apr 2023
28 Mar 2023
Amount
1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
d. 4 to 5 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
c. 3 to 4 mt.
2.6) Supply and filling of 40 mm HBSJ
2.7) Supply and filling of 20 mm HBSJ
7.2) Supply and fixing of Bituminous filler pad, 20 mm thick. for expansion joint
13.1) Filling with Excavated Earth in foundation and basement
21.2) Supplying and fixing of Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m
b. T.W. below 2 m length.
23.3) Supply and fixing of Magnetic door catches
25) Supplying of M.S.Holdfast
30) Finishing the top of flooring with cement concrete 1:3 (No sand) Ellispattern
31) Weathering Course with concrete broken brick jelly 20mm gauge (No sand)
37.1) White washing three coats using clean shell lime slaked
39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate
40) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint
41) Painting two coats - New "iron work"
46) Supply and fixing 20 mm dia Aluminium Hanger Rod
47) Supply and fixing Aluminium Towel rail 75 cm long
48) Supplying and fixing of aluminium plate with five pins for coat stand
49) Supply and fixing chromium plated 8 guage Picture Hook
50.3) Supply and planting avenue trees
50.4) Supplying and fixing of triangular shape chicken mesh tree guard
52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
b. 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
52.1) Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls
52.4) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 c) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
53.3) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)
69) Electrical arrangements Supplying and fixing 15amps 3 pin plug type socket
72) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook
74) Charges for assembling and fixing of ceiling fan of different sweep
76) Supplying and laying of 8SWG GI wire
81) Supplying and fixing best country wood meter cupboard
86) Providing pre-constructional Antitermite treatment
112) Supply and fixing of Exhaust Fan 300 mm dia
238) Applying one coat of anticorrosive treatment on steel reinforcement rods
ANNEXURE 2.15) Supplying and filling stone dust
3.1.3) C.C.1:5:10 for Foundation & Basement
3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works
3.3.3) P.C.C. 1:8:16 using 20 mm broken brick jelly for foundition and basement
6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")
8.2.4.1) Providing and laying in position, Standardised Concrete Mix M-25 Grade a. In Foundation and basement
b. Stilt / Ground Floor
c. In First Floor
d. In Second Floor
e. In Third floor
f.In fourth floor
g.In fifth floor
h.In sixth floor
9.2.2) Brick partition wall in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth floor
g. In sixth floor
10.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
g. In Fifth floor
h. In sixth floor
11.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor
b. In First Floor
c. In Second Floor
12.1.1) Brick partition in C.M. 1:4 using kiln burnt country bricks of size 22 x 11 x 5cm 50 mm thick a. In Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In fifth Floor
14.2.I) Precast Cupboard slab 20 mm thick using standardised concrete mix M25 a. In Stilt / Ground Floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth floor
14.2.II) Precast cupboard slab 40 mm thick using standardised concrete mix M25 a. In Foundation & basement
b. In Stilt / Ground Floor
c. In First floor
d. In Second floor
16.4.1) Precast Jally ventilator 50mm tk.using standardised concrete mix M25 without vibrating charges a. In Ground Floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth floor
18.1) Providing Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,
b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works
c.For Square and rectangular columns and small quantities
d.Vertical wall
21.5.2.2) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door shutter with frame
21.6.1.3) Supplying and fixing Monolithic RCC door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M25grade (with out vibrating charges) a. 900 x 2100 mm
22.1.8) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf with brass fittings. a. 1000mm x 2100mm.(Single leaf)
22.3.3) Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters. including two coat enamel paint & one coat primer. a)1.200m x 2.100m
23.1.8) Supplying and fixing of single leaf door shutter by using Best Indian T.W. Marine door shutters with 9mm thick phenol bonded BWR grade plywood as per IS 303-1989 size of 900mm x 2100 mm
23.5.4.1) Supplying of lock & key godrej/equivalent NAV -TAL PADLOCK 6 Levers long shackle (3 key)
26.1) Flooring in C.C.1:5:10
28.1) Floor plastering in C.M. 1:4, 20 mm thick
29.8.1) Supplying and fixing of Colour Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick
29.9.1) Supplying and fixing of Colour Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).
32.1.1) Finishing top of roof with one course of Pressed Tiles of approved superior quality (23cmx23cmx20mm) mixed with Water proofing compound
33.2.1) Plastering in C.M. 1:5, 12 mm thick.
34.2.1) Plastering in C.M. 1:4, 12 mm thick
35.2.1) Special Ceiling plastering in C.M. 1:3,10 mm thick
36.1) Cement mortar Border in C.M. 1:5, 12 mm thick a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
43.1) Supplying, fabricating and placing of Mild steel / RTS grills (without cement slurry) for all sizes of rods.
44.2.3) Providing Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M25)
b) Augering 30cm dia
44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark type -A for Rain water down fall pipe
50.5.1) Supplying, Fabricating and erection of M.S Scheme Name board
53.4) Supply and fixing of C.I Manhole cover 60 x 60 cm (50kg weight )
53.5.1) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories
54.1.1) Supplying and fixing of 15mm dia half turn CP long body tap
54.2.1) Supplying and fixing of 15mm dia half turn CP short body tap
56.3.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.
56.4.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.
57.1.1) Supplying and fixing of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover
58.3) Supplying and fixing the following dia PVC (SWR) pipe including all required PVC specials etc., all complete., a) 110mm dia PVC SWR pipe
b. 75 mm dia PVC SWR pipe
58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
58.5) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type 'A' with PVC cowl a) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials
59.2.1) Supplying and fixing 150mm x 100mm size stone ware Gully trap using chamber burnt bricks of size 23x11.4x7.5cm
60.1) Supplying and fixing of PVC Nahani Trap (4way/2way)
61.3) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe
b. 160 mm UPVC Non Pressure pipe
62.1.1) Supplying and fixing of following dia PVC Bend as per IS 10124/1982 Part II a. 110 mm dia PVC bend fabricated 6 KSC
62.2.1) Supplying and fixing of following dia PVC Equal tee as per IS 10124/1982 a. 110 mm dia PVC Equal tee (Mould) BIS 7834/1975 Part VI
64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point
66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself
68.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places
70.5.2) Supply and fixing of 4' 18 watts LED Tube Light
71.7) Supply and fixing of 32 Amps DP Switch with Metal Clad (Side Handle)
75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer
77.7) Run off main with 2 wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
80.2) Supplying and fixing of 1 no of 450x 375 x 20mm thick TW plank
81.1) Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work
82.3.1) Supply and fixing of 30W LED street light etc.,
84.3) Run off main with 2 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
93.1.1) Plastering with CM 1:3, 12 mm thick mixed with water proofing compound
108.6) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand
151.3.1) Supply and laying of the following size of PVC LTUG armoured cable (Below GL) a) 3.5 core 120 sqmm PVC LTUG armoured cable
b) 3.5 core 95 sqmm PVC LTUG armoured cable
c) 3.5 core 25 sqmm PVC LTUG aluminium armoured cable
155.1) Supply and erection of 125Amps floor mounting type metering panel board (Cubical type) OF SIZE 5'x4'x1.5' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system
155.2) Supply and erection of 125 amps floor mounting / wall mounting panel board (Cubical type)OF SIZE 3.5'X6.5'X1' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system
155.3) Supply and erection of 250Amps floor mounting type metering panel board (Cubical type) OF SIZE 10'x6'x1.5' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system
161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 core x 120 sq.mm. PVC LTUG armoured cable
b) 3.5 core x 95 sqmm PVC LTUG armoured cable
c) 3.5 core x 25 sqmm PVC LTUG armoured cable
161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 C x 120 sqmm PVC LTUG aluminium armoured cable
b) 3.5 C x 95 sqmm PVC LTUG aluminium armoured cable
c) 3.5 C x 25 sqmm PVC LTUG aluminium armoured cable
175.1.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board
175.1.7) Supply and fixing of horizontal three phase distribution board with MCBS. TPMCB DB with acrylic Door cover IP42 protection of 4ways 3 phae DB, No of was incomerMCB / Isolated-4, No of ways income ELCB / RCB - 4, No of outgoings ways
177.2.2) Supply and fixing of horizontal three phase 4way triple pole (higher end) and neutral MCB sheet steel enclosure distribution board with Metal door cover with IP 42 Protection
178) Providing Earthing station using pipe electro as per specification
207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls
207.4.1) Providing two coats of Exterior Emulsion paintincluding primer for outer walls
209.3.3) Cleaning the Expansion joint Treatment (30mmx15mm) providing in different places using air blower to remove dust particles and racking the bituminous pad
209.4.5) Clearing the garbage material present below GL upto 4m depth and shifting to 5 km away from the site
213) Supplying and fixing of SFRC manhole cover 600x600mm
238.1) Anticorrosive treatment for window grills
255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb
b) 12 watts LED bulb
255.6.1) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb
344.2) Supply and fixing of Bevelled edge mirror 500 x 400 x 5.5mm
361.2.1) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring in C.M 1:3, 20mm thick with grout (Tile joint filler)
367.1) Providing wooden Melamine polish for new wood work
379.4.4) Supplying and fixing of Granite tile of size 2'x 1', 10mm Thick For kitchen arrangements (jet black) C.M 1:3, 20mm thick a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth floor
379.6.1) Supplying and fixing of Sinthetic Grey, Paradise and similar varieties Granite Tiles for wall cladding in C.M 1:2, 10mm thick.
382) Supply and fixing of Cuddapah sink 600 x 600 x 200mm
741.2) Supply and fixing of following MCB / ELCB / RCCB a) 63 Amps four pole RCCB / ELCB
b) Four Pole 63A, 10KA MCB
c) Double Pole 40A, 10KA MCB
d) Single Pole 6A to 32A, 10KA MCB
828.1) Supply and laying of Hard core layer required thickness
832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
946) Supply and laying of PVC Water Bar 150mm wide with Single Bulb
960.4.1) Supply and fixing of alumimium TNPHC Emblem of 30" height with approved coloured powder coat
960.4.2) Supply and fixing of english brass letters 25cm
960.4.3) Supply and fixing of tamil brass letters 25cm
960.4.4) Supply and fixing of 8"dia plastic plate foam plate of 3mm thick with number approved colours etc.,
958.5) Supply and erection 8 persons capacity Passenger lift (S+5) Lift car size 1300 x 1100mm (Gearless with machine room)
959) Supplying and fixing 125 KVA Genset with AMF panel
959.1) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval
SRP CONSTRUCTION COMPANY
VIJAYMURALI BUILDER
PTM PROJECTS PVT LTD
Bidder Name
PTM PROJECTS PVT LTD
SRP CONSTRUCTION COMPANY
JOHNSUN ENGINEERING CONTRACTORS
VIJAYMURALI BUILDER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid