JJM 2020-2021- Bodinayakkanr Block - Package No. JJM/BOD-39

Amount

Providing water supply arrangements at Soolapuram

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Bore well with motor

Drilling of 150 mm dia vertical bore well in hard rock area including labour charges for inserting of casing pipe etc

Overburden soil

Hard rock areas

Supply and delivery of 200mm dia PVC Casing pipes confirming to IS including All charges for Labour etc..,.

Supply and delivery of THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD 50 x 250 head 1 unit including cost and conveyance of all materials to site etc…

Supply and delivery of THREE PHASE 7.5 HP PANEL BOARD-STAR DELTA WITH TWO LEVEL GUARD AND AUTO START including cost and conveyance of all materials to site etc…

Supply and Cost Of 6 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 50 mm G.I pipe ( Medium ) " C " class Pipe with Standard Specification

Supply and Delivery of 110 mm Dia HDPE pipes PE 80 PN 6 with ISI mark as per IS 4984/2016

Supply and Cost Of 100 mm G.I pipe (medium) " B" class Pipe with Standard Specification

Laying and jointing of 110 mm HDPE pipes PE 80 PN 6 in to trench with proper grade and alignment and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed For pipe line Trench work

Labour Charge for refilling of pipe line trench with excavated Earth

Labour charges for the erection of (THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET) submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supplying and fixing of 50 mm Double Air valve and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete. (4193for Air Valve +18000 for Brick Chamber = 22193)

Double Air valveas per IS 14845/2000 ( item No :- 12.20)

Supply and fixing of 6way SP DB 16A DPIC switch of 500 V ( slide lendle) with F & N on suitable TW board with PWD earthing

Suppy and Fixing of MS Kisok Box with Pedestal

Providing water supply arrangements at Malingapuram

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Bore well with motor

Drilling of 150 mm dia vertical bore well in hard rock area including labour charges for inserting of casing pipe etc

Overburden soil

Hard rock areas

Supply and delivery of 200mm dia PVC Casing pipes confirming to IS including All charges for Labour etc..,.

Supply and delivery of THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD 50 x 250 head 1 unit including cost and conveyance of all materials to site etc…

Supply and delivery of THREE PHASE 7.5 HP PANEL BOARD-STAR DELTA WITH TWO LEVEL GUARD AND AUTO START including cost and conveyance of all materials to site etc…

Supply and Cost Of 6 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 50 mm G.I pipe ( Medium ) " C " class Pipe with Standard Specification

Supply and Delivery of 110 mm Dia HDPE pipes PE 80 PN 6 with ISI mark as per IS 4984/2016

Supply and Cost Of 100 mm G.I pipe (medium) " B" class Pipe with Standard Specification

Laying and jointing of 110 mm HDPE pipes PE 80 PN 6 in to trench with proper grade and alignment and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed For pipe line Trench work

Labour Charge for refilling of pipe line trench with excavated Earth

Labour charges for the erection of (THREE PHASE 7.5 HP SUBMERSIBLE PUMPSET) submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supplying and fixing of 50 mm Double Air valve and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete. (4193for Air Valve +18000 for Brick Chamber = 22193)

Double Air valveas per IS 14845/2000 ( item No :- 12.20)

Supply and fixing of 6way SP DB 16A DPIC switch of 500 V ( slide lendle) with F & N on suitable TW board with PWD earthing

Suppy and Fixing of MS Kisok Box with Pedestal

Construction of 100000 lakh lit Sump @ Ammapatty

Earthwork excavation in hard stiff clay, black cotton, hard red earth, shales, murrams, ordinary gravel stoney earth mixed with 50% fair sized boulders etc., with an initial lead of 10m and lift of 2m. and as directed by TWAD BOARD Officers.

For Foundation

First depth of 0 to 2 m

FOR HSC, HRE

FOR SDR

FOR DMR not requiring blasting

Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials, mixing,placing, ramming, curing, finishing etc., complete and as directed by TWAD BOARD Officers.

PCC Laying (beyond 1.5 m and upto 4.5 m from GL)

Reinforced Cement Concrete with M30 Design Mix for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete.and as directed by TWAD Board Officers.

Upto 1.50 m Below GL

Upto 1.50 m below GL

Upto 4.50 m above GL from GL

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props 10cm - 13cm spaced at 75cm c/c etc., complete and as directed by TWAD Board Officers.

For 0.00 to 3.30 M (Plane Surface)

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

FOR CIRCULAR COLUMN

For 3.30 to 4.30 M (Plane Surface)

For 3.30 to 4.30 M (Curved Surface)

Supplying, fabricating and placing in position of RTS rods for reinforcement including cost of steel and binding wire, labour charges etc., complete for RCC works and as directed by TWAD Board Officers.

Providing and fixing of cut stone (Rough dressed) set in CM 1:3 of size 0.45 X 0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed by TWAD Board Officers.

Providing RCC Ventilator of 0.150 m dia using 20mm HBG stone including cost of allmaterials, centering, shuttering, strutting,reinforcement, placing of concrete, finishing, curing and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed by TWAD Board officers.

Supply,Delivery and fixing of CI Manhole frame with cover of following size including cost of all materials, fixing of MS clamps,Bolt and nuts etc.,complete and as directed by TWAD Board Officers. Size 0.60m x0.60m

Colour washing two coats using cement paint including cost of cement paint cost of all materials, labour charges, etc., complete and as directed by TWAD BOARD Officers.

Supplying and fixing in position of RCC in side access lader of following size using 20mm size HBS jelly including cost of all materials, centring, shuttering,strutting, fabrication and placing in position of reinforcement, finishing, curing etc., complete and as directed by TWAD Board Officers.

Provision for supply & fixing of MS ladder including Painting etc. complete.

Providing water supply arrangements at Salimarathupatty

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Providing water supply arrangements at Bathrakalipuram

Pipe line

Supply and cost of 75mm dia 6KSC PVC pipe with ISI mark etc complete

Labour for cutting Concrete Roads for laying water mains or sewer.including all cost etc..,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification. SS20B

Laying and jointig of 75mm dia 6ksc PVC Pipe and G.I pipe into the trench with proper grading and alignment and all labour charges etc,,complete

Refilling the Pipe line trench with excavated earth other than sand complying the Standard specification etc,,complete

Supply and delivery and fixing charges of Woltman model with removal mechanism Water meters with filters and with confirming to ISO 4064 Part I,II,III class B specification, production box of size 20cm x 30cm for fixing of water meter, the box should be rectangular base the rate including required fittings for fixing and with all tools & tackles etc., complete

FHTC Connection

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers. - 15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items) - 20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KMC Associates, Theni