SPL REPAIR TO INTERNAL ROADS IN POCKET 01, 02, 05 AND 06 UNDER GE ROORKEE

Amount

Scarifying or picking gravelled,macadam or bituminous macadamsurfaces nexc 50 mm deep in area exc 400 sqm complete all as specified and directed.

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required granite trap or basalt type complete all as specified and directed

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal ). depth of potholes exc 30 mm completed all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with broomny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat/ priming coat with bituminous primer @ 5 Kg per 10 Sqm using paving bitumen VG-10, over surfaces including preparation of surfaces all as specified and directed.

M&L for premix bituminous Maccadam laid/ rolled and compacted to required gradiant and camber consolidated thickness n exc 75 mm with paving bitumen any penetration with VG-30. complete al as specified and directed.

M&L for Bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thckness with 5.5 % binder content VG-30 by weight of total mix rolled and compacted to required camber and gradient complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed by engineer in charge.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M & L for applying termoplastic reflective paint as in road marking 02 mm thick single coat as in center line or edge line road marking of n. exc 150 mm width using HOT MARK termoplastic paint (HOT application) white by indigenous modem propelled road marking method as directed incl all ingredient such as binder glass beads Titanium -dioxide calcium carbonate linter fillers themoplastic requirement for glass beads shall be per Table no 800-4 specifiation incl spraying of glass beads instruction , approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F of speed bumps breaker made up of ABS plastic PU material rubber black and yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistent moisture and temprature including fixing using anchor bolts and epoxy mortar grout complete all as specified and directed.

M&L for Identification sign/cautionary mandatory and information sign board, area exceeding 1.00 Sqm but not exceeding 1.50 Sqm with 2mm thick aluminium composite panal covered by encapsulated lens type retro reflective sheet (grade 3m type II diamond grade ) on both side with green base, fixed on and including stainless steel frame of size 25mmX25mm and hang on 50mm dia stainless steel pipe of thickness 2 mm (fabrication work from SS 304 material ) of height up to 2.00 metre from the natural ground level to top and post embedded in ground with PCC 1:3:6 type C-2 using 40mm graded stone aggregate of size 45cmX45cmX60cm including necessary excavation and earth work complete all as specified and directed. Note: (i) Shape/ Design of sign board as approved by GE. (ii) The letters and symbols etc; on both side shall be as per site requirement and as approved. The size and font of wording as per direction of GE.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

M&L for a tack coat/ priming coat with bituminous primer @ 10Kg per 10 Sqm using VG-10 over surfaces including preparation of surface all as specified and directed

GAYATRI CONSTRUCTION (BID ID -3288527)

Maa Vaishno Enterprises (BID ID -3286647)

M/S MRIGASYA INFRA (BID ID -3287161)