ADDN/ALTN TO BOUNDARY WALL FROM TCP-1 TO BOOTY MORE CHOWK AND PROVN FROM KHELGAON CHOWK TO MAHAR AREA AND CERTAIN MINOR WORKS UNDER GE DIPATOLI

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling barbed wire, any type and in any positions complete all as spd and directed.

Dismantling fencing wire mesh, any type complete all as spd and directed

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar, complete all as spd and directed

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as spd and directed

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete, complete all as spd and directed

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups , complete all as spd and directed

M&L RCC 1:2:4 Tybe B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete, complete all as spd and directed

M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Columns, pillars etc, complete all as spd and directed

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L 50mm thick 1:2:4 type B-0 (12.5 graded grade aggregate) as in copings, complete all as spd and directed

M&L for prepration of newely plastered surface and applying two coats of cement base paint over a coat of primer incl preparation of surfaces, complete all as spd and directed

S/F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified & directed.

S/F in repair galvnised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts including securing or typing at crossing with and provn of galvnised MS wire staple or steel pins etc as directed

M/L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

M&L PCC Type B-2 (1:2:4) using 40 mm graded aggregate in foundation filling and packing of fencing post or other works complete

S&F Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screws etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S & F 5 to 10 mm dia mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but n. exc. 10 cm long complete.

S&F MS round bars, Mild steel , round or square bars, in available lenghts in IS-15911-2010.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified.

Supply only chain link MS galvanised fencing, any size or type as directed by Engr-In-Charge.

M & L preparation of new steel surfaces of any description over 10 cms in width or girth not otherwise described and apply two coat of synthetic enameled paint over a coat of red oxide zinc chrome primer as specified

M/s Mukesh and company (BID ID -3104366)

BHARAT ELECTRICAL & ELECTRICAL WORKS (BID ID -3105024)

M/S Hind Constructions (BID ID -3104801)

united builders (BID ID -3098462)

SHRI SIDHI VINAYAK ENTERPRISES (BID ID -3103515)

MS JODHI PRASAD SINGH SONS (BID ID -3103604)