Repair/Renovation of Regional and Divisional Office buildings at Manda Jammu

Amount

Removing dry oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied on existing cement paint surface).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of engineer-in-charge.

Providing corrugated G.S. sheet roofing including vertical/curved surfaced fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets, complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2.

Providing and fixing glazed shutters for doors, windows and elerestory windows using 10 kg/sqm (4mm thick) float rate for thickness of glass panes including ISI marked M.S. pressed butt shutters in mm per sqm hinfles bright finished of required size with necessary 35 second class Deoder wood.

Renewing glass panes with wooden fillets wherever necessary: Float glass panes of thickness 4.0 mm (weight not less than 10 kg/sqm).

Providing and fixing Water proof Ply-wood 4 mm thick.

Providing and fixing Gypsum board for ceiling of approved quality with necessary nails etc complete. Standard quality board 4.5 mm.

Providing and fixing plain square edged wooden beading 65x12 mm section with screws of approved quality for xeiling. 2nd class teak wood.

Making a treatment with Mseal and fluid on the nuts and bolts on CGI Sheets on the roof.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope, excluding cost of centering and shuttering, all work upto floor V level.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Centring and shuttering including strutting, propping, etc and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12mm thick.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Engage 2 labour for 4 days for dismantling of bathroom to convert into kitchen.

Providing and fixing Hydrolic Door Closure.

Providing and fixing Door Spring.

Providing and fixing PVC Low level cistern.

Providing and fixing CP Angel valve.

Re-lettering with black Japan paint of approved brand and manufacture.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931. a) 15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS: 8931. a) 15 mm nominal bore.

Stainless steel kitchen sink without drain board 610 x 510 mm bowl depth 200 mm.

J.R.S. Trading Corporation

Sudesh Kumar