Structural repairs, exterior painting and other miscellaneous Civil works in auxiliary buildings and other areas at BARC Hospital building, Anushaktinagar, Mumbai.

Amount

General Notes:- 1. Tenderers are advised to visit the site of work with prior permission of Engineer- in- Charge/ authorised representative to acquaint themselves with the nature and location of work before quoting tender. 2. Since the work is to be carried out in hospital / lab buildings which are occupied by patients , health care workers,official etc. The work has to be carried out with least disturbance to the occupants. 3. During execution of work all labourers, supervisors & engineers of contractors shall use personal protective equipments. Work execution without PPE's shall not be permited.BARC construction safety manual shall be followed during execution of works. 4. Any work activity shall be started at site with prior work permit issued by departmental safety officer/Engineer/Supervisor. 5. No debris shall be left over during the repair works under each item on any day. An area for 'Debris bins' will be identified on the request of contractor for collection of debris generated on day to day basis

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead .

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge.

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.Steel supplied by the contractor.Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.

Providing structural Repairs in Old Damaged concrete structures / surfaces with approved Polymer with following operations : 1) Removal of loose/Spaled or damaged concrete by chipping and cleaning the concrete suface and Reinforcement steel with wire brush and with water jet. 2) Cleaning the Re bars with Acetone for complete Rust removal and washing with water jet to make the surface free from Acid content. 3) Applying Protective Coat / bond coat using Polymer and Cement in the proportion of 1: 1.5 (1 part of polymer and 1.5 parts of cement in Synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : Washed and dried river sand 87.50 kg : Silica sand 37.50 Kg mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg Washed and dried river sand : 0.75 Kg Silica Sand : 200 ml polymer) '5) If thickness of repair exceeds 20 mm, after every 20 mm thick bond coat as per 2 above to be applied before continuing further structural repair works. This work is inclusive of all materials, labour, scaffolding complete all as directed at site, using approved Polymer suitable for Structural repair shall be used. Note: Scaffolding will be paid separately under relevant item

Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge

Using 100% SFMC

Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment)

Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels in Superstructure.

Lead charges for Lead of debris beyond 4 KM but upto & including 30 KM , by mechanical transport including loading, unloading, stacking / levelling etc. The rates are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement. 'Note: Finding authorized ground for disposing debris, transporting of debris and disposal ground, disposing, stacking, levelling and statuary charges if any, will be the responsibility of the contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after acumulation of minimum one truck load.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses, structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. 'Up to and including 300 mm Joists, 350 mm channels, and below sections using materials confirming to IS:2062. All test reports to be provided along with the supply of the materials.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications.

Providing and fixing hand rail using 304 grade Stainless Steel pipes , plate EPs etc. of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge. Notes for Item No. 9, 10, 11 : '1. Structural steel confirming to IS 2062 shall be supplied. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. '3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. '4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. '5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge.

Providing Rough cast plastering 25 mm thick for exterior masonry and concrete surfaces laid in 2 operations base coat with cement mortar 1:4, (using crushed sand), 15 mm thick and finishing coat with cement and gravel/ stone chips in proportion of 1:3, 10 mm thick including double scaffolding up to 10.00 metres height wherever necessary, curing and hacking of concrete surfaces, addition of water proofing compound @ 2% by weight of cement or as per manufacturers specifications for both the coats complete as directed by the Enginner-in-charge (water proofing compound to be supplied by the contractor)

Providing and painting walls with (TWO coats) of approved shade of high build protective , elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.

Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of EPILUX-13 High Build primer of 50 micron thickness over steel/aluminum surfaces by spray at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). On STEEL /Aluminium surfaces.

Providing and treating the OLD surface ANTI FUNGAL treatment using product Artilin paints OR other approved brand i) entire old paint to be scrapped out ii) The neeru / cement punning to be removed by chipping completely iii) one coat of BIOWASH to be applied iv) entire surface to be finished with White cement based Wall putty of approved make to get uniform undulation free surface complete as directed by the Engineer-in-charge

Providing and painting, finishing with antifungal paint of approved brand with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineer-in-charge

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 5.00 mm thickness

With tinted colour float glass panes of 5.0 mm thickness

Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections

Providing and Fixing Anchor Fastner of approved make HST stud type including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings.and as per EIC HST stud type m 12*115 mm long

Providing and fixing cement bonded particle board of M/s Bison or approved equivalent with washer, flange type screws etc. for claddings / flooring over existing frame work, as per manufacturers specification and directed of Engineer-in-charge. For 12mm thick cement board for partition & false ceiling. Note :- Aluminium required for framework & joint covering will be measured separatly and paid under relavant Item of this schedule. Only actual covered area of the cement bonded particle board will be measured and paid under this item.

Providing and injecting high performance epoxy mortar HIT-RE-100 of M/s HILTI or equivalant approved at all locations in RCC.It includes drilling hole, cleaning of hole to make it free from dust, injecting epoxy mortar through injection gun, anchoring steel reinforcement shear links/anchor bolt/shear connector etc. complete as per manufacturer specifications and as directed by Engineer in Charge. Note:- The steel reinforcement will be paid in relevant item of this schedule.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Degree holder Engineer with 1 (one ) year experience/Diploma holder Engineer with 3 year experience /Licentiate in Civil/Construction Engineering / Technology conducted by Board of Technical Examinations / University/ Autonomous Govt / Govt recognized recognized Polytechnic/ Institute. (2)Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3)The contractor shall carry out number of jobs per month as per requirement at site. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one engineer exclusively for the particular job. (5) Engineer should be engaged after scrutiny of BARC Engineers/Engineer-in-charge and approved by Competent authority and the deployed engineer will report to BARC Engineer / Engineer-in-charge.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Technician having minimum SSC or Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of less than one year duration from ITI/Government Recognised Vocational Training Institute. (2) Deployment: The contractor shall deploy one Technician for each job as single day work , for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3)The contractor shall carry out number of jobs per day as per requirement at site. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) Technician should be engagde after scrutiny of BARC Engineers/Engineer-in-charge and approved by Competent authority and the deployed technician will report to Engineer/ Engineer-in-charge .

Providing safety Personnel Protective Equipments (PPEs) of M/s Udyogi Plastics make or approved equivalent for engineers, supervisors and workers including transportation, delivery, storage in good condition ,maintaining issue records etc. as instructed by Engineer in-charge.

Full harness safety belt - conforming to EN 361 (IS:3521-1999) with twin braided rope lanyard having scaffolding hooks .

Safety helmet- as per IS 2925 : 1984 (Reaffirmed 2000) or EN 397 CE approved including helmet refill with sweat band, chin strap, air slot for ventilation etc.

Safety shoe- as per IS:15298 Part 2 or EN 345

Safety goggles - with 180° field of vision of optical Class-1 meeting safety standard ANSI Z 87.1 High Impact Standard, CE Marked, conforming to EN 166 or IS 5983 (Reaffirmed 2002)

Hand Gloves - with 2 Thread Poly-cotton premium quality cotton as per IS:4770–1991 (Reaffirmed 2001)

Ear muff- lightweight with adjustable ear cup as per IS:6996 ‐1973(Reaffirmed 1998) or EN 352‐1:2002

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications -in superstructure

Forming of grooves of uniform size from 12 mm X 12 mm to 25 mm X 15 mm in plastered surfaces as per approved pattern using wooden batterns, nailed to the under layer including removal of wooden batterns, repair to the edges of plaster panels and finishing the groove complete as per specifications and as per the direction of Engineer-in-charge.

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge - Galvalume sheet roofing 0.50 mm Thickness in Single sheet.

Providing and fixing precoated Galvalume roofing accessories using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete. - Roofing accessories of Galvalume sheet up to 600 mm total width for ridges, gutters, aprons,and flashings

S.V ASSOCIATES

SUNIL CONSTRUCTION

CREATIVE DECOR

RAMDEV ENTERPRISES