Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC AWARD | |
| 2 | L2₹25.3 L+₹3.6 L (16.8%)Rejected-Finance 1ST FLOOR 100 FT ROAD NEAR HERO HONDA AGENCY OPP NARANG CHILDREN HOSPITAL BIBIWALA ROAD NORTH ESTATE | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.6 L+₹5.0 L (22.9%)Rejected-Finance 6 9 GRAND SQUARE DANAPUR CANTT PATNA BIHAR 801503 | PATNA | PATNA | BIHAR | 801503 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹27.4 L+₹5.7 L (26.4%)Rejected-Finance MONIRAMPUR DASPARA P O BARRACKPORE | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 743101 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹28.1 L+₹6.4 L (29.5%)Rejected-Finance SULTANPUR NEAR POLICE CHAUKI DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
23 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
REPAIR TO MISC B/R WORKS IN OTM ACCN OF COI SUB AREA COMPLEX OFFRS MESS FLAG STAFF HOUSE JCOS MESS AND MES IB ETC UNDER AGE BR II AT GE DANAPUR CANTT
2023_MES_583243_1
GE/DNR/T- OF 2022-23 / 8664/E8
Open Tender
Civil Works
Item Rate
270 days
DANAPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹40,000
Yes
10 May 2023
27 Feb 2023
25 Mar 2023
27 Feb 2023
23 Mar 2023
14 Mar 2023
Amount
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed.
All as per item No 1.00 mentioned here in above but on ceiling.
Demolition of cement concrete in ground floors and paving (un reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding but backing, removing serviceable tile to store and rubbish off the premises.
Demolition of Re-inforced Cement Concrete in Roof, floors, (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete.
M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L for 10mm thick Light Shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with shade of tiles , over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed .
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in flooring, finished even and smooth with out using extra cement complete all as specified and directed.
M&L for glazed ceramics coloured tiles of size 450x300x 7mm thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
M & L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.
M&L brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed.
M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete & cinder concrete etc. complete all as specified and as directed.
M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.
M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed .
Supply only liquid water proofing compound complete all as specified.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as directed
Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) complete all as directed
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.
S & F of 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.
S & F Steel windows with side hung shutters including box type hinges with steel handles, 2 Nos steel tower bolts, 100 mm long peg stay and hold fast complete with glazing bars, dovetailed or welded complete all as specified & directed by Engineer-in-Charge.
~Ditto~ All as per item srl No.31.00 above, but without glazing bars.
S&F Steel ventilator with top hung shutter including, hinges, peg stay and hold fast complete all as specified and as directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs/hold fast hinges, lock strike plate etc of size 105mmX60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.
S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs/hold fast hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.
M&L PCC 1: 3: 6 type C-0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frames and similar work complete all as specified and directed.
S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0
S&F Solid PVC door frame of size 75mm x50mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as spd and as directed
S&F Factory made solid PVC Moulded door shutter 28 to 30mm thick (style) with particle board core& with 2,4 or raised panel design with2mm thick Moulded PVC Sheet on the front face & 2mm plain Colour PVC sheet on back face , supplying & fixing in the frame at site as per specification in SSR Part-I.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd.
S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 all as spd.
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long.
S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.
S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified.
S&F Aluminium handles, cast type, anodized 150 mm size complete ISI Marked.
S&F Aluminium handles, cast type, anodized 100 mm size complete ISI Marked.
S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S&F small fitings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long all as spd.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.
~Ditto~ as per item srl No. 52.00 but fixing in repairs complete all as specified and directed.
Hacking out old broken glass, (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S&F 4 mm thick sheet glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane,
S&F 5 mm thick sheet glass, ordinary quality, and glazing with oil putty in square exc 0.50 sqm in each pane,
S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc with self closing heavy duty casement type sliding channel & hinges of approved make in kitchen cabinet, cupboards etc.
M & L for 18 mm thick block board grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework as in linings, panelling similar location complete all as specified and directed.
S & F of 40 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finish complete all as specified and directed.
S & F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.
S & F of 2nd class hard wood (CHIR) plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed.
S&F in repair 2 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.
S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete.
S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.
S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved complete.
S&F stainless steel Brackets with knobs fancy type for stainless steel designer curtain rod 20 mm dia as approved complete.
S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.
S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.
S&F powder coated anodised aluminium frame & shutters sliding or casement type for window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixing complete.
Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed
All as per description as Srl item 72 here-in-before but 20mm.
S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F 20 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed
S&F in repair chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and as directed. Make: Parryware/Prayag/Jaquar
S&F in repair Brass chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed.
S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.
S&F in repair vitreous pedestal china basin for WHB as per suitable for WHB size 550x400 mm complete.
S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 365 X 635 X 770 mm coloured with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, fixed in repairs, complete all as specified and directed . (Make : Jaquar cat part no CNS WHT 353N, CNS WHT 203) or equivalent
S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest PVC 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed.
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall omplete all as specified and as directed.
S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.2 m long including nut/washer complete all as specified and directed. Make: Parryware/Prayag/Jaquar
S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.
S&F in repair of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall omplete all as specified and as directed.
S&F in repair bib tap 15 mm bore fancy type cast copper alloy chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and as directed. Make: Parryware/Prayag/Jaquar
S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make: Parryware/Prayag/Jaquar
S&F in repair brass CP tubular towel rail 20 mm dia "D" type 60 cm long between flange complete all as specified and directed.Make: Parryware/Prayag/Jaquar
S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.
S&F in repair angle cock 15 mm bore cast copper alloy fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.
S&F in repair two way angle cock 15 mm bore cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. Make: Parryware/Prayag/Jaquar
S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44)
S&F in repair of stainless steel soap dish, of standard size and shape complete all as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever mild steel bracket brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specifed and directed.
S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.
S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.
S&F in repair brass chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. Make: Parryware/Prayag/Jaquar
S&F in repair plastic water closet seat cover, Cream / white / Black colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC. (Make-Parryware/Prayag/Hindware)
S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.
S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed..
M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) including necessary form work complete.
M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
S&F MS TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified
Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 110/100/75 mm dia pipe complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
~Ditto~ all as per item No 108.00 above but 75 mm bore complete all as specified and directed.
S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.
Supply and fixing PVC (SWR) bends (any radius) 110mm complete all as specified and directed.
Supply and fixing PVC (SWR) Tee, (single T) equal or un equal (any radius) 100/110mm complete all as specified and directed.
S&F PVC (SWR) bends any radius With access door of 75 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
S & F of 75 mm dia PVC (SWR) Plain floor trap, with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair CP/PTMT grating 100 mm size (ISI Marked) complete all as specified and directed.
Dismantling of water tank exc. 250 Litres but not not exc. 500 Litres capacity complete all as specified and directed.
Dismantling of water tank exc. 500 Litres but not not exc. 1000 Litres capacity complete all as specified and directed.
S&F 500 ltrs capacity rotational moulded polythene water storage tanks (cylindrical vedrtical with colsed top) hoisted and fixed in position all as specified in SSR Part-I.
S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 20mm-210)gms. Make : Prayag
S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
M&L Preparing old wooden surfaces exceeding 10Cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.
M&L for preparation of new/old plastered surface of wall applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.
M & L for preparation of newly plastered surfaces of ceiling & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.
M&L for preparation of new/old plastered surface of wall applying two coats of oil bound distemper on ceiling or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
Preparation of old surfaces of ceiling and applying two coats of white wash.
M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall by washing, rubbing down and stopping painted surface chajja and applying two coats of cement base paint complete all as specified and directed.
Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed.
M&L Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(WPC will be paid separately)
M&L PCC type C2, 1:3:6 (40 mm graded stone aggregate) as in sunken slab filling complete all as spd and as directed
M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Cleaning, removing all scale, dust, dirt and elgy using with wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250 mtrs , washing the tank/ pipe with bleaching power solution and finally applying 2% potassium permagnate solution for disinfection , including marking with black paint on white base on tank "Tank cleaned on _____Dt_____" . Capacity 500 Ltrs all as directed by Engr-in-Charge.
All as per item No 141.00 above but capacity 1000 litrs complete all as specified and directed.
M&L for treating the surface including grinding and polishing with beeswax polish in terrazzo floors complete all as specified and directed. (Necessary T&P will be arranged by contractor)
M&L for cleaning steel wire brushing and rust remover and (reebaklens solution) to exposed corroded reinforcement @ 0.20 Ltr/Sqm of exposed reinforcement bars/structural members surfaces at any height and applying minimum 40 micron thick (dry film thickness) coat of epoxy zincrich primer (Nitozink primer of M/s Fosroc chemicals (India) Pvt Ltd/ M/s Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height and providing rendering 10 mm thick cement & sand mortar 1:3 using liquid water proofing compound Nitobond AR not less than 2% by weight of cement of M/s Fosroc / M/s Pidilite / M/s Choksey chemicals, at any height including scaffolding, complete all as per manufacturers instructions and all as specified and directed.
S&F rubber gasket for door sealing complete all as specified and directed
S&F in repair garage/gate mild steel door shutter including necessary welding if required and make it functional as specified and directed
Easing of steel window of glazed and gauzed shutter including oiling, greasing and welding if required and make it functional as specified and as directed.
Easing of wooden door shutter (Panelled or skelton) and make it functional as specified and as directed.
Easing of Aluminium door/windows and make it functional as specified and as directed.
S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified & directed.
S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified & directed.
M&L double action floor spring machine for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.
S&F in repair towel ring round with round flange including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar Cat part No CAN-CHR-1121BN.
S & F for solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement on PVC farme as per specification & drawings as given in SSR part - II (2010 print) on serial page No. 162 complete all as specified and directed.
M&L for 10mm thick Double Charged/ Dark Shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L for 10mm thick Double charged / Dark shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick rendering in CM 1:4 complete.
M/S Priya Trading Agency
M/s Naresh Chand Agrawal
M/S MODERN CONSTRUCTION
jaglalchoudharyandsons
SINHA CONSTRUCTION
Vijay Bakshi and Son
M/S SAROJ KUMAR SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .