PROVISION OF CERTAINS REVENUE WORK MINOR WORK AND SPECIAL REPAIRS IN THE AOR OF AGE BRI BRII EMI EMII UNDER GE 865 EWS

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all as specified and directed by Engr-in-Charge.

Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.

M& L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed by engr-in-charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints

S & F 30mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed (Note: WPC will be measured and paid seperately).

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern .

S&F rolled section as in main and cross beams ,hip and jack rafters , purelins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250 Quality A

Dismantling structural steel work including doors and gates of any description.

M&L for two coat of synthetic enamel paint on new /previous untreated corrugated steel surface including prepation over a coat of red oxide zinc chrome primer with modrant solution complete all as specified and directed .

M&L for precast cement concrete block masonary type C-1 (1:3:6) , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members.

M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board interior grade , prelaminated one side with decorated choice lamination and other side balancing white fixed with screws/nails to timber frame work as in wall pannelling,complete all as specified

ITEM NO-79

ITEM NO-84

ITEM NO-85

ITEM NO-90

ITEM NO-93

ITEM NO-96

ITEM NO-99

ITEM NO-100

ITEM NO-101

ITEM NO-102

ITEM NO-103

ITEM NO-104

ITEM NO-105

ITEM NO-106

ITEM NO-107

ITEM NO-108

ITEM NO-109

ITEM NO-110

ITEM NO-111

ITEM NO-112

ITEM NO-113

ITEM NO-114

ITEM NO-115

ITEM NO-116

d down, screwed for iron pipe or for brass ferrule

S&F in repairs, 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends.

ITEM NO-119

M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified

M&L Walling of random rubble stone masonry, uncoursed welll bonded, and solidly hearted, built in CM 1:6 all as specified and directed.

M & L for reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L form work to rough finshed edges of concreat flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and directed.

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Taking down shutter of any description exc 1.0 sqm but n exc 2.00 sqm

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F 35 mm thick 2nd class softwood,glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 250 mm long aluminum door sliding door bolt incl all necessary fitting and bolts.

Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads.

S&F 4.8 mm thick sheet glass ordinary quality in any position and glazing with oil putty, glazing clips /beading as per site requirement n'exc 0.5 sq.m in each pane.

S&F 3mm thick glass sheet oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc.

S&F in repair galvanished mild steel wire cloth .56mm nominal dia of wire and average width of apperature 1.18mm and fixed with tinted tacks, or galvanised wire staples.

S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified

S&F anodised aluminium window and ventilator shutters, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

S&F in repair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg.

S&F brass mortice lock four levers (Harrisons) vetrical type size 100mm or above in old or new position as directed by Eng-in -incharge.

S&F Door stopper 150 mm long length of cover plate of aluminum alloy body and tongue anodised with hard drawn steel spring, fixed in floor, complete fixed in repair all as specified and directed.

Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil complete all as specified & directed.

M&L Pre -cast cement concrete block masonary with solid blocks made out of PCC 1:3:6 type C-1 (20mm graded aggregate) set in cement mortar 1:4.complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm in hard / dense soil.as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point as directed.

Supply and fix refrigerator, electric driven (single phase), capacity 236 3 star rated Digital inverter , Frost Free double door refrigerator. Model No RT28C3053S8/HL of Samsung or equivalent of LG/ Haier/ Whirlpool.

Supply and fix single phase stabilizer suitable for refrigerator capacity 300 to 600 ltr. Make V-Guard VGSD 100 or equivalent of LG/ Haier/ Whirlpool.

M&L wiring for circuit/submain wiring along with earth wire with the 2x4 sqmm+1x 4 sq mm earth wire of FR LS PVC insulated copper conductor single core cable in surface casing and caping of appropriate size complete all as directed

S&F 20 Amps switch socket combination 5 in 1 combined with PVC BOX white complete all as specified and directed by Engr in Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 35 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excation over in area in hard/dense soil n exc 1.5m in deep and getting out as specified and directed.

Excation over

ITEM NO-157

ITEM NO-158

ITEM NO-159

ITEM NO-160

ITEM NO-161

ITEM NO-162

ITEM NO-163

ITEM NO-164

ITEM NO-165

ITEM NO-166

ITEM NO-167

ITEM NO-168

ITEM NO-169

ITEM NO-170

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/GI pipe complete all as specified

Each Job

S&F in repair CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed (Make: Jaquar Cat No: AQN-7721 or equivalent).

S&F of cast iron sluice valve 150mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

Cutting the existing 100/150 mm, CI/DI/GI Pipe line in position for insertion of new tees 150/100 mm dia as directed for tapping out branch connection complerte including joints, excavation and earth work. ( Note :- cost of fitting like CI Tee, CI Collar etc will be measured and seperately)

Material and labour for construction of stone masonary valve pit size 105x105x100 cm (internal dimension) built in cement mortal 1:4 incl plastering 20mm thick internally and externally in CM 1:4 PCC 1:4:8 TYPE D-2 15 Cm thick in foundation extending 10cm beyound external faces of wall around PCC flooring 1:2:4 type B-1, 40mm thick cover made out of 3.15mm thick MS round bar and locking arrangement with lock 2 keys . MS sheet cover should be painted with two caats of enamelled paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as spd and directed.

ITEM NO-178

(a) One light/exhaust fan point controlled by one way switch

Per Point

ITEM NO-179.02

ITEM NO-179.03

ITEM NO-180

ITEM NO-181

ITEM NO-182

ITEM NO-183

ITEM NO-184

ITEM NO-185

S&F 20 Amps switch socket combination 5 in 1 combined with PVC BOX white complete all as specified and directed by Engr in Charge.

Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as directed.

ITEM NO-188

ITEM NO-189

ITEM NO-190

ITEM NO-191

ITEM NO-193

ITEM NO-194

ITEM NO-195

ITEM NO-196

ITEM NO-197

ITEM NO-198

10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

ITEM NO-200

ITEM NO-201

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Complete all as spd and directed.

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed by Engr in Charge.

Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed by Engr in Charge.

Taking out U/S LT UG cable for relaying/ replacement any size cable all as directed by Engr-In-Charge. Note:- Excavation and earth work shall be measured paid separately under respective item.

Supply and Laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 50sqmm, 3.5 core.

10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

ITEM NO-207

ITEM NO-208

S&F repair Soap dish fixed with and incl CP brass screws complete all a specified and directed (Make: Jaquar Cat No: AKN-35731P or equivalent).