Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 LAccepted-AOC AT RENGALI ANGUL 759105 | ANUGUL | ODISHA | 759105 | ₹10.8 L | L1 | Accepted-AOC Through transparent lottery system |
| 2 | L1₹10.8 LRejected-AOC | ₹10.8 L | L1 | Rejected-AOC Through transparent lottery system |
| 3 | L1₹10.8 LRejected-AOC | ₹10.8 L | L1 | Rejected-AOC Through transparent lottery system |
| 4 | L1₹10.8 LRejected-AOC A PO KULUMA P S RENGALI DAM SITE DIST ANGUL PIN 759105 | KULUMA | ANGUL | ODISHA | 759105 | ₹10.8 L | L1 | Rejected-AOC Through transparent lottery system |
| 5 | L1₹10.8 LRejected-AOC | ₹10.8 L | L1 | Rejected-AOC Through transparent lottery system |
Tender Value
Refer Docs
EMD Value
₹12,660
Closing Date
27 Jan 2026, 5:00 pmClosed
C P Head
RHEP, Rengali
Renovation of Rengali Project Hospital Building, Rengali Dam Site (Part).
2026_OHPCL_124575_1
RHEP/ TCN No.-54/2025-26
Open Tender
Civil Works - Buildings
60 days
RHEP, Rengali
PLEASE REFER TENDER DOCUMENT
3 documents required · 3 mandatory
₹6,000
₹12,660
Yes
20 Apr 2026
16 Jan 2026
28 Jan 2026
16 Jan 2026
27 Jan 2026
16 Jan 2026
16 Jan 2026 - 22 Jan 2026
Dismantling and removing 2.5 cm thick artificaial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge.
Removing of cement plaster from walls including racking out joint to 12 mm deep and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge.
Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty and labour charges etc. complete.
Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty and labour charges etc. complete.
Fly Ash brick masonry in cement mortar (1:4) using fly ash brick having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc. including cost, conveyance, royalties and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.
20 mm thick cement plaster (1:4) admixed with 101-LW+ (Dr. Fixit) in finished smooth over the RCC Ceiling after cleaning the rebars by applying 204-rust remover (Dr. Fixit) and removal of all loose particles, applying a thick coat of neat cement slury admixed with 301- Universal Repair Product (Dr.Fixit) (1 part URP and 1.5 part OPC cement), watering for curing to required time, including cost, conveyance, royalties,cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge.
16 mm thick cement plaster (1:6) after racking out the joints including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge.
Supplying, fitting and fixing polished vitrified tile of premium grade in floors of size 600mm x 600mm coloured / printed series (Homogeneous) of Kajaria/ Somani/Jhonson & Jhonson/AGL or equivalent make confirming to IS : 15622:2006 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-charge.
Fabricating, supplying & fixing G.I. gate/ Grill made of G.I. angle, flat, square bar, G.P. sheet including Priming, painting etc. of approved design and as per direction of E.I.C.
Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 8mtr height.
Priming one coat with any approved primer (water based) on Plastered surface after cleaning the surface, sand papering etc. with required putty work including cost, conveyance, royalties, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.
Wall painting two coats with Plastic emulsion paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.
Wall painting two coats with Weather seal coat paint of any approved shade over the Exterior surface of walls including cost, conveyance, royalties, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge.
Priming one coat with any approved primer on Iron/wood work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.
Painting two coats any approved shade of paint on iron/wood work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.
Taking out the door or window shutters and reflexing them including screws as may be required as per direction of Engineer-in-charge. (a)Door
(b) Window
Replacing glass-panes including cutting to size with cost of nils and putty.
Removing old tarfelt from roof slab, cleaning the surface, lowering and removing the debris away from work site with all lead & lift as per direction of EIC.
Providing and laying water proofs with polymeric bituminous membrance (plastic felt) Superior Shaliplus® 2045 (STP Make) of 2.25Km/Sqm and 1.5mm thickness consisting of layers having center core of 20microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. Film of grade 2504 including cleaning & priming the surface with Shalitex primer (Oil based) of STP make @ 0.30Kg/Sqm providing a coat of hot blown bitumen of 1.32Kg/Sqm. Applying and laying plastic felt membrance with 10cm overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete.
Supplying and fixing commercial Water Purifier of storage capacity of 20 ltr. and purifying capacity ranging from 40 LPH to 50 LPH of approved make and model as per Engineer-in-charge. (Make: KENT/ AQUAGUARD/ LG/ BLUE STAR /LIVPURE/PUREIT/AO SMITH/ WELLON)
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
technical_575832.pdf
techsummary_575832.pdf
finance_575832.pdf
BOQ Comparative Chart
xlsx
finsummary_575832.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_575832.xls
BOQ • 0.25 MB
tenderspecification.pdf
Tender Documents • 1.78 MB
Download all tender documents and submit your bid