ALHW/DCEA /EE ALHW /TEND-08/2025-26

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer(C),ALHW Division, ALHW, Sri Vijaya Puram

Name of Work: Repair and maintenance of Porta Type toilet blocks situated near vehicle ferry ramp at Swaraj Dweep

Contract No: ALHW/DCE(A)/EE(ALHW)/Tend- 08/2025-26

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, including cost of all labour charges, minor tools, labour welfare cess, GST etc, complete. 1 23 Kgs 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, holdfasts etc, complete and stacking within 50 metres lead, including cost of all labour charges, minor tools, labour welfare cess, GST etc, complete. Of area 3.00 Sqm and below. 2 7 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, including cost of all labour charges, minor tools, labour welfare cess, GST etc, complete. All kinds of soil 3 11 Cum 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Providing and laying CC 1:3:6 (1 Cement, 3 Pulverised sand & 6 Stone chips of size 20mm graded Sri Vijaya Puram local quarry) in all CC works as directed by the EIC, including cost of cement, cost of stone chips and pulverised sand, screening and washing of both the aggregates, excluding cost of centering and shuttering charges, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator, curing, including cost of all materials, all labour charges, transportation charges of all materials to worksite, minor tools, labour welfare cess, GST etc, complete. 4 2 Cum 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Providing and laying CC 1:2:4 (1 Cement, 2 Mainland river sand & 4 Mainland Stone chips) using 20mm graded stone chips from Mainland, Mainland river sand, 43 grade Ordinary Portland Cement for cast-in-situ concrete and as directed by the EIC, including cost of cement, cost of stone chips and mainland river sand, all labour charges for mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, transportation charges of all materials to work site and running charges of concrete mixer, vibrator, consumables and all other required materials, cost of minor tools and plant, labour welfare cess, GST etc, complete. 5 10 Cum 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing form work with marine plywood 19mm thick, including centering and shuttering so as to give a rough finish, strutting and propping etc. and removal of the same from reinforced cement concrete and plain concrete work, as directed by the EIC, including cost of marine plywood, centering and shuttering, all labour charges, cost of binding materials, cost of transportation charges of all materials to work site, cost of ballies, cost of minor tools and plant, labour welfare cess, GST etc, complete. Foundations, footings, bases for columns and mass concrete. 6 44 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge, including transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. External Work 11 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

7.1 CPVC Pipes (20mm nominal dia) 8 28 Rmt 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

7.2 CPVC Pipes (25mm nominal dia) 9 12 Rmt 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8 Providing and laying of CPVC pipe fittings/Metal pipe fittings of various sizes of ISI mark, including cost of pipe fittings, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 20mm dia fittings. 11 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

8.1 CPVC Ball Valve 1 2 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.2 Brush FTA 2 20 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.3 Metal Two Way Bib Cock 3 2 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.4 Metal Bib Cock 4 8 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.5 Metal Angular Cock 5 15 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.6 Flexible PVC drain hose connection pipe 6 15 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8.7 Health Faucet 7 2 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, including cost of pipe, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 11 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

9.1 Single Socketed Pipes (110mm dia @ 4kg/Sqcm) 8 22 Rmt 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9.2 Single Socketed Pipes (75mm dia @ 4kg/Sqcm) 9 18 Rmt 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10 Providing and fixing of approved quality of PVC fittings, including cutting and threading, including cost of pipe fittings, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 11 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

10.1 PVC Bend (100mm/110mm dia) 1 5 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10.2 PVC Tee (100mm/110mm dia) 2 5 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10.3 PVC Door Bend (100mm/110mm dia) 3 5 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10.4 PVC Door Tee (100mm/110mm dia) 4 10 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10.5 PVC Reducer (110x50mm dia) 5 10 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10.6 PVC Bend (50mm dia) 6 5 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

11 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, (Make : Paryware / Cera / Cita / Equest / Somany / Honda) with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, including cost of water closet with seat & lid and its fittings and fixtures, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. W.C. pan with ISI marked white solid plastic seat and lid. 7 2 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 Providing and fixing white vitreous china flat back, Single half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern (5.00 Ltr Cap), with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required, including cost of urinal with cistern and its fittings and fixtures, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 8 4 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

13 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required, including cost of squatting plate with 5 litre P.V.C. automatic flushing cistern and its fittings and fixtures, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. Single squatting plate with 5 litre P.V.C. automatic flushing cistern 9 3 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

14 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, including cost of wash basin and taps and its fittings and fixtures, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 10 2 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

15 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, including cost of mirror and hard board, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. Rectangular shape 453x357 mm 1 3 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

16 Providing and fixing Anodised aluminium (Anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge, including cost of all materials, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. (Glazing, paneling and dash fasteners to be paid for separately) For Fixed Portion 2 18 Kgs 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

17 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge, including cost of all materials, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 3 1.4 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

18 Providing and fixing solid PVC panelled door of ISI mark of approved brand with 3mm thick and frame provided with 5mm thick PVC, including cost of PVC door with frame, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 4 5.5 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

19 Providing and fixing anodised aluminium Handle 100mm with plate 150x32mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, including cost of aluminium handle with screws, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 5 6 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

20 Providing and fixing anodized aluminium tower bolt 200x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, including cost of aluminium tower bolt with screws, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 6 3 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

21 Providing and fixing anodized aluminium sliding door bolt 250x16mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required co.lour or shade, with nuts and screws, including cost of aluminium sliding door bolt with screws, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 7 3 Nos 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

22 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, including cost of GI sheet, GI hook, bolt, nuts etc, cost of transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 7 30 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

23 Providing and fixing 6mm thick Oceanic sheet ceiling of Everest or equivalent make of size 610mm x 610mm with necessary nails etc., in aluminium framed ceiling (frame work to be paid separately), including cost of Oceanic sheet, nails, cost of transportation charges of all materials to work site, scaffolding charges, all labour charges, minor tools, GST, Cess etc., complete. 8 24 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

24 Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer (Medium density) conforming to IS: 12823 Grade-l Type-ll (Exterior Grade), in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge, including cost of pre-laminated particle board with screws, cost of transportation charges of all materials to work site, scaffolding charges, all labour charges, minor tools, GST, Cess etc., complete. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 9 7.4 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

25 Painting two or more coats on new work with 1st quality synthetic enamel paint of approved brand and manufacturer over the MS Angle, kerb walls and hand railing, as directed by the EIC, including cost of all materials like paint, brush, scaffolding charge, transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 1 149 Sqm 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

26 Removing and disposing of night soil from septic tank manually, including cleaning the blockages in sewage pipes, removing of night soil and soaked earth from surrounding area of the septic tank and disposing the removed sludge/material at a distance of 500 mtrs from the septic tank, including cost of miscellaneous items, transportation charges of all materials to work site, all labour charges, minor tools, GST, Cess etc., complete. 22 5 Cum 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words