Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.2 LAccepted-AOC PO PS JANG DISTRICT TAWANG ARUNACHAL PRADESH 790104 | JANG | TAWANG | ARUNACHAL PRADESH | 790104 | L-1 | Accepted-AOC L1 Accepted | |
| 2 | L-2₹33.2 L+₹2,949.40 (0.09%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-2 | Rejected-Finance Not L1 | |
| 3 | L-3₹37.4 L+₹4.2 L (12.7%)Rejected-Finance | L-3 | Rejected-Finance Not L1 | |
| 4 | L-4₹39.5 L+₹6.3 L (18.9%)Rejected-AOC | L-4 | Rejected-AOC Not L1 | |
| 5 | L-5₹39.8 L+₹6.6 L (19.8%)Rejected-AOC H NO 01 MADINA BAGH MEHJOOR NAGAR NEAR HOTEL RAFADA SRINAGAR 190015 J K | BUDGAM | JAMMU AND KASHMIR | 190015 | L-5 | Rejected-AOC Not L1 |
Tender Value
₹43.7 L
EMD Value
₹87,350
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang Pin 900270 C/o 56 APO
PROVN OF VEHICLE SHED AT KHUMBATHANG UNDER GE KHUMBATHANG
2023_MES_600718_1
80051/16/E8
Open Tender
Civil Works
Item Rate
180 days
Khumbat
Class D, Cat a (i)
8 documents required · 8 mandatory
₹500
G E Khumbathang
₹87,350
Yes
16 Sept 2023
3 Jun 2023
3 Jul 2023
3 Jun 2023
1 Jul 2023
17 Jun 2023
Amount
Sch 'A' Part-I B/R work:- Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil, complete all as specified and directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard / dense soil, complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/dense soil, complete all as specified.
Removing surplus soil to a distance and not exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-Charge.
Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete etc, complete all as specified and directed by Engr-in-Charge.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed by Engr-in-Charge.
Steel work in tubular poles or trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed by Engr-in-Charge.
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed by Engr-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
Preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.
Aluminium dividing strips, 1.5mm thick and 38 mm width, inserted in position, conform to design, complete all as specified and directed by Engr-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
150 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floor and mass concrete, complete all as specified and directed by Engr-in-Charge.
150 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in flooring, complete all as specified and directed by Engr-in-Charge.
Sch 'A' Part-II E/M :- Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm multistranded in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one light /fan/bell point/bell point/ exhaust fan controlled by one no, one way 5/6 Amps switch, complete all as specified and directed by Engr-in-Charge.
Point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm multistranded in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover for one socket outlet 5 Amp on independent board, complete all as specified and directed by Engr-in-Charge.
All as per srl item No 17 here-in-before but with conductor of size 4 sqmm (Nominal area) multistranded for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable, complete all as specified and directed by Engr-in-Charge.
Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed by Engr-in-Charge.
Switch Socket combination, multipurpose flush type 2 in 1, 3 pin, 5 Amp and 2 pin 5 Amp, complete all as specified and directed by Engr-in-Charge.
Switch Socket combination, multipurpose flush type 2 in 1, 3 pin, 5 and 16 Amp, complete all as specified and directed by Engr-in-Charge.
Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings(angle/plain), complete all as specified and directed by Engr-in-Charge.
Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, 6 Amps, 250 volts AC, complete all as specified and directed by Engr-in-Charge.
Pressed sheet metal enclosure double door SPN distribution board, 8 way suitable for MCB's fitted with bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz, complete all as specified and directed by Engr-in-Charge.
MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed by Engr-in-Charge.
MCB SPN 40 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed by Engr-in-Charge.
LED light fitting 1x20 watt for decorative AC box type LED Lightening fixture with extrued polycarbonate, environmental prewired and making connection with 3 core PVC connector to light fittings, complete all as specified and directed by Engr-in-Charge. Make Havells cat part No LHEXBLP71NW009 or equivalent make as specified in list of Makes.
Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized iron wire of size 4mm dia by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, strip protected by dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion using 4 mm GI wire as casting lead and MS galvanised plate of size 600x600x6mmxas earth electrode for desired result, complete all as specified and directed by Engr-in-Charge.
High power LED security light 35/36 Watt 230 volt AC outdoor type high pressure die cast aluminium hosing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engr-in-Charge.
PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other, complete all as specified and directed by Engr-in-Charge.
Good quality dry sand cushinoning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule Pt-I (2009). Punned thickness shall be measured and paid, complete all as specified and directed by Engr-in-Charge.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed by Engr-in-Charge.
Two single core 10 sq mm for sub Main wiring with copper conductor multistanded PVC insulated and usheathed 1100 volts grade in and inculding PVC casing capping/pvc cnduit with fixing accessories of required size including one run of 10 Sq mm copper conductor, complete all as specified and directed by Engr-in-Charge. Note- Two runs of 10 sq mm cable, one run of 10 sq mm earth cable and one run of PVC casing Capping shall be measurd as one running meter
Note :- Earth work for E/M portion shall be measured and paid under respective items of Sch A Part-I (B/R Portion)
M/S TRADE LINK
M/S Web Company
M/S M.S. BUILDERS
M/S BALI CONSTRUCTIONS
B.R ENGINEERING & CONSTRUCTION CO
Aatrey Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .