Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹18.8 L+₹3.0 L (18.9%)Rejected-AOC A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L2 | Rejected-AOC higher rate | |
| 3 | L3₹20.9 L+₹5.1 L (31.9%)Rejected-AOC TP 117 2ND FLOOR MAURYA ENCLAVE PITAMPURA DELHI 110034 | DELHI | DELHI | DELHI | 110034 | L3 | Rejected-AOC higher rate |
Tender Value
Refer Docs
EMD Value
₹44,000
Closing Date
15 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND39/202223 COMPERIHENSIVE B/R WORK IN KASHMIR HOUSE, NORTH HUTMENT SOUTH HUTMENTS IN THE AOR OF AGE B/R KASHMIR HOUSE UNDER GE NEW DELHI
2022_MES_535355_2
GE/ND-39/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹44,000
Yes
8 Oct 2022
18 Aug 2022
17 Sept 2022
18 Aug 2022
15 Sept 2022
1 Sept 2022
Amount
Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description incl removal of debris from site.
M&L 20 mm thick granite (any type ) stone machine cut bedded and jointed with grey cement slurry and pointed with white cement with pigment to match incl cutting and polishing over 20 mm thick screed in CM 1:6 in floors .
Dismantling wrought or mild steel work of any description not otherwise provide for in any height upto two storey incl necessary scaffolding where required.
S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.including necessary double steel scaffolding where required upto two storey bldg.
S&F for Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified and as directed
S&F welded steel wire fabric n.exc 4 Kg per Sqm complete to steel member.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed by Engr-in-Charge.necessary double steel scaffolding where required upto two storey bldg.
S&F 4mm thick aluminium composite panel sheet of any choice colour fixed with self taping screw/bolt in any height upto two storey building including necessary double steel scaffolding where required complete all as specified and as directed incl necessary double steel scaffolding where required upto two storey bldg.
S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc
S&F 10 mm thick coloured polycarbonate multiwall sheet manufactured from high quality, UV stabilized resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour all as specified and directed by engineer in charge
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer .
Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises .
M&L vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cm 1:6.
M&L vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished Double charged dark shed area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cm 1:6.
S&F non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tiles exc 0.11 but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 20 mm thick screed in CM 1:6 .
M&L for glazed ceramic tiles in vertical surface of size 450X300X7 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified
M&L PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick CM(1:6) including filling joints with white or colour cement as directed.
M&L for 300x300x10mm thick heavy duty vitrified tiles set in 15mm thick CM (1:6) including filling joints with white or colour cement as directed
Demolition of Concrete of any description and in any position not otherwise specifically provided for
M&L for 75mm thick Cement concrete type D- 2 1:4:8 (40mm graded aggregate) as in floor
M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade
M&L for Sand filling under floors tiles including watering and consolidation
Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete .including carefully taking down of electric fittings/fixtures from wall and ceiling.
S & F of PVC wall panelling frame made out of electric resistance welded mild steel square steel tube of size 25 mm x 25 mm x 16 SWG, size laid both walls not less than 600 mm C/C with two coat of synthetic enamel paint over a coat of red oxide zinc on frame shall be fixed to walls by means of wooden/plastic rawl plugs or gut ties PVC wall panelling shall be laminated plastic section SPUF-144 of size 250 mm x 6 mm with distance between the supporting ribs not exceeding 19 mm including necessary cutting for electrical fitting as per site requirement complete all as specified and directed. (Make: Cactus/Sintex/Plasopan)
S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc complete all as directed at site .Make:- ECON Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.
S&F PVC false ceiling with frame made of electric resistance welded semi-bright steel tube of size 38mm x 38 x16 SWG. The grid size of ceiling frame shall not exc 600 x 600mm. The frame shall be painted with two coat of synthetic enamel paint over one coat of red oxide primer. The PVC ceiling shall be Hallow multi chambered section of size 250mm x 6mm jointed to another by male and female push fitting system and will be fixed to the frame with the help of steel screws including necessary cutting for electrical fitting all as specified and directed (Make: Plasopan/ Sintex/ CACTUS).
S&F Mineral fibre ceiling boards 12 mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 70)
M&L for GI powder coated micro perforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete with GI powder coated grid consisting of T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastener wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc complete all as per specification and directed (Make : Armstrong/hunterduglas)
S&F urinal vitreous china including waste coupling and fixing accessories of size 375x315x620mm Make: JAQUAR CAT PART (URSWHT-132530) or equivalent in CERA,HINDWARE
S&F in repairs snow white vitreous china EWC single piece type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete complete all as specified and directed by Engr-in-Charge Make : JAQUAR CAT Part No: SLSWHT-6851P or equivalent in Parryware,Johnson Pedder
S&F in repair vitreous chine wash down water closet pedestal pattern white complete and connection to flushing cistern and fixed in floor with brass screw complete all as specified and directed.
S&F in repair wash hand basin vitreous china white, counter basin of size 540X480 mm including making good the surface/joints with white cement complete all as directed by Engr-in-Charge. Make : CERA CAT Part No: 1009 or equivalent in approved makes
S&F in repair 15mm bore chromium plated single lever wash hand basin pillar cock quarter turn complete all as specified and as directed MAKE: Cat part No OPR-15001PM of JAQUAR or equivalent in approved makes
Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubbing down with water, etc.in cement or cement lime plaster, any description.
M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge
M&L 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge
M&L for preparation of newly plastered surface of wall and applying two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified.
Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each
Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm ..
S&F powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width Make of glass (MODI/FLOAT/ATUL).
S&F powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles and fittings on floor spring complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width Make of glass (MODI/FLOAT/ATUL)
S&F powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter incl 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge.
S&F aluminium ornamental grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and as directed
Dismantling boarding of any description fixed in any position with screws.
S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL).
S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc all as directed by Engr-in-Charge , working station etc Make: Kitply/M/s Green Ply
S&F 100 mm wide Venetian blinds vertical type incl guide rail, pulling thread etc incl taking down existing pelmets.
S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets.
Demolition of brick work built in cement mortar incl all arches , pillars and quoin etc
S&F red stone on dholpur stone louvers & jallies 25 to 30 mm thick incl all moulding rounding ornamental work complete all as directed by Engr-in-Charge
S&F 900X100X100 mm ornamental red stone dholpur stone port incl all mounding, weathering, throating & rounding set and jointed in CM 1:4 complete all as directed by Engr-in-Charge
M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 with old size bricks
S&F in repair 8mm thick teak wood wooden flooring interlocked with each other over 6micron polyethylene sheeting over the concrete surface to minimize moisture migration from the concrete. Colour/Shade of wooden flooring as approved by the GE.
R D ENTERPRISES
GLIBS CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .