Periodical services to OTM Accn in 159 GH and 307 Fd Hosp under AGE B/R-I of GE (East) Ferozepur Cantt.

Amount

M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces wall and applying two coats of Washable distemper/ Economy emlusion over a coat of primer complete all as specified and directed. Make :- Berger Bison Emulsion, Asian Tractor Emulsion, Nerolac Beauty Emulsion or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and directed. Make :- Snowcem, Acrocem (Acro paint), Durocem (Berger paint) or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.

M&L for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including preparation corneces, pillars by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots complete all as specified and directed.

M&L for all as item No 3 above but applying two coats of white wash on old surfaces of walls complete all as specified and directed.

Taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying 02 mm thick wall putty (Birla putty) on the bldg internal surface of wall with uniform thickness incorporating Birla putty @ 2.00 kg/Sqm & making surface absolutely smooth on entire satisfaction of Engineer-in-Charge. complete all as specified and directed. Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.

M&L for Preparation of old decorated surface of wall and applying one coat of Washable distemper/ Economy emlusion complete all as specified and directed. Make :- Berger Bison Emulsion, Asian Tractor Emulsion, Nerolac Beauty Emulsion or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for Preparation of new decorated surface of wall and applying two coat of Washable distemper/ Economy emlusion complete all as specified and directed. Make :- Berger Bison Emulsion, Asian Tractor Emulsion, Nerolac Beauty Emulsion or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for Preparation of old decorated surface of wall and applying two coats of Acrylic Emulsion complete all as specified and directed. Make :- Berger Rangoli Emulsion, Asian Apcolite Emulsion or equivalent in Nerolac/ Dulux Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed. Make :- Snowcem, Acrocem (Acro paint), Durocem (Berger paint) or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.

All as per item No 9 above but applying two coats of cement based paint on old surfaces of walls complete all as specified and directed. Make :- Snowcem, Acrocem (Acro paint), Durocem (Berger paint) or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.

M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including preparation cornice and pillars by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc. finished even and fair (without using extra cement incl) taking down cement plaster of any description including Preparation of newly plastered surfaces on ceiling and applying three coat of white wash complete all as specified and directed.

M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Make :- Berger Luxol, Asian Apcolite, Nerolac Synthetic Enamel Paint or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion/painting application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Make :- Berger Luxol, Asian Apcolite, Nerolac Synthetic Enamel Paint or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion/painting application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for preparation of old decorated surfaces of wall and applying one coats of colour wash on wall incl. corners, pillars etc on prepared surface complete all as specified and directed.

M&L Applying one coat of Acrylic Exterior Emulsion on walls including preparation of old decorated plaster surfaces on wall complete all as specified and directed by Engr-in-charge. Make :- Berger weather coat, Asian apex , Nerolac excel or equivalent Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

M&L for writing letters or figures (Block Roman Italic and Indian ) n. exc 30 cm High on wall surfaces, so that the stand out boldly and solidly without showing signs of brush marks complete all as specified and directed. (Note :- The letters to be write with in the synthetic enamel painted back ground)

Taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying 02 coats wall putty (Birla putty) on the surface with uniform thickness incorporating Birla putty @ 2.00 kg/Sqm & making surface absolutely smooth on entire satisfaction of Engineer-in-Charge & applying two coats of Acrylic Emulsion white or tinted complete all as specified and directed. Make :- Berger Rangoli Emulsion, Asian Apcolite Emulsion or equivalent in Nerolac/ Dulux Note :- (i) The entire quantity of paints required shall be stored in premises of the subdivision or at a place directed by Engineer-in-Charge before execution of work. (ii) The work pertaining to periodical services shall be executed by authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (iii) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (iv) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (v) Primer/Distemper/emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).

Cutting out any type of vegetation complete from root grown inside the wall specially in contact with sanitary pipe and pouring / grouting with hydrochloric acid (HCL) on left out root if any including making good surface to match adjacent surfaces complete all as specified and directed.

KAILASH CONSTRUCTION COMPANY

R.S.ENTERPRISES

M/s Shri Krishna Enterprises

HAPPY ELECTRICALS

M/s Sidhu Bros

Manjeet Singh Contractor

B.L. Chaudhri and Co.

M/s Sarup Singh

M/s Bansi Lal