REPAIR MAINT OF AREA DRAINAGE CHAIN LINK FENCING COMPOUND WALLS FOOTPATHS AND MISC B AND R WORKS IN TECHNICAL AND RESIDENTIAL ARE AT R AND D E E DIGHI PUNE 15

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specfied and directed.

Demolition of Brickwork/ soild block masonry or stone/boulder masonry, built in cement mortor including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specfied and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specfied and directed.

M&L for stone Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specfied and directed.

All As per Item No 4.00 here in before but except stones complete all as specfied and directed. Note : Stones obtained from demolition shall be used.

M&L for PCC block masonry with soild blocks 1 :3:6 Type C1 (using 20mm grded aggregate), exc 10 cm in width and setting in CM 1 :6 complete all as specfied and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specfied and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and making the surface even and fair without using extra cement complete all as specfied and directed.

M&L for Rendering 20mm thick on fair faces of stone work or concrete surfaces (in two layers 15mm + 5mm) in CM 1:4 and making the surface even and smooth without using extra cement complete all as specfied and directed.

Demolition of cement concrete on ground floor and pavings n exc 15cm thickness complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone agrregate) as in surface channels and drains including rounding and chamfering to edges complete all as specfied and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone agrregate), as in coping concrete including necessary form work all as specified and directed.

S&F in repairs precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) drain cover slabs supprted on walls including necessary formwork complete all as specified and directed.

S&F in repairs 50mm thick precast reinforced (steel fibres) cement concrete LD-2.5 , M-30 (Min Grade of Concrete) drain cover slabs square or rectangular in size area of each cover exc 0.5 sqm supprted on walls including 10mm to 12mm dia steel handles to each covers complete all as specified and directed. All as Per IS: 12592:2002 Note: Rate is including Reinforcement (Steel fibres) used in the drain covers

All as per Item No 14.00 here in before but area of cover not exc 0.50 sqm

Cleaning of storm water drains from mud, vegetatation, debries etc from drains and removing n exc 50m from the starting point and levelled as directed by Engineer In Charge, incluning Removing and placing of precast cement concrete drain covers carefully (without damaging) after cleaning / reapair works complete all as specified and directed..

M&L for Cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in hard standing, mass filling etc completed all as specified and directed.

M&L for Cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) as in sub base concrete, mass filling, all as specified and directed.

M&L in repairs for rubber moulded glazed Machine pressed precast concrete interlocking paver block with white cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid and bedded over and including 50mm thick (compacted thickness) levelled sand completed all as specified and directed.

Dismantling existing interlocking tiles from floors and refixing on levelled surface, in same/ different locations, laid and bedded on 50mm thick (compacted thickness) levelled sand completed all as specified and directed. Note: Rate includes lead for shifting of interlocking tiles within the MD land.

M&L in repris for rubber moulded Chequered cement concrete tiles with white cement and pigment area n exc .09 Sqm, 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling fencing wire mesh, any type, size, shape and thickness etc complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply only PVC coated Chain link MS galvanised fencing, of size 50mm x 50mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire completed all as specified and directed.

Taking down for repairing and refixing in new or same position of chain link fencing of any shape and size including fencing posts and horizontal supporting bars, fillets, bolt and nuts etc complete all as specified and directed (Note: Replacement of any old materials by new one will be measured and paid in relevant items of this schedule.) completed all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long completed all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified and directed.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc, confirming to Fe 410-W (Gde-E-250) quality 'B'. completed all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard / dense soil, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 (using 40mm graded stone agrregate) as in foundations, filling and mass concrete completed all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) completed all as specified and directed.

Taking down old barbed wire fencing from posts and refixing the same in new or old position,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) completed all as specified and directed.

All as per Item No 33.00 here in before but for concertina coil of any dia and description.

S&F in repairs razor edge concertina coil 910mm dia (51 spiral per coil), weight apprx 12 kg (+/- 5%), expandable upto 6 to 8mtrs consisting of 2.6mm dia heavy galvanised high tension spring steel wire as pr IS 4454, medium barbs made of 0.5mm thick low carbon heavy galvanised cold rolled steel sheet as per IS 513, heavy duty steel clip as per IS 2062 and epoxy resin coating for anti corrosion, complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed.

Providing and laying in repairs factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of new or previosuly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Mukund Engineers and Contractors

M/S Gurnir constructions