COMPREHENSIVE REPAIR OF SEWAGE/LEAKAGE DAY TO DAY MAINTENANCE AND PETTY REPEIR IN DOGRAI BDE AREA OF AGE B/R-I UNDER GE NAMS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down of shutter of any description size exc 1 sqm but n.exc 2 complete all as specified and directed.

S&F 35mm thick 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified all as specified.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S & F 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2020

S&F Solid PVC Door frame of sizes 95mm x 50 mm made out of 5 mm laminted both side colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One coat of Red oxide primer to MS window and guard bar. Note : complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth priming coat with pink primer and applying two coat of sythentic enamel paint all specified.

Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm each in same opening all as specified and directed

Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm but n exc 2.0 sqm each in same opening all as specified and directed

Taking down old aluminium door/Ventilator/window and refixing in same opening after repairing to damaged/loosened rail sections,tightening of screws, repairing/ replacement of rubber beading to aluminium shutter, repairing/oiling to locking arrangement and oiling / greasing,repairing to handle,tower bolt as required and making the shutter run/swing smooth complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S & F 150mm aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified

S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.

S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed.

S & F in repair satinless steel magnetic catcher complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair 50mm wide and 3 to 6 mm thick in tappered door seal rubber fixed with screws on doors complete all as specified and directed,

S&F, in repair door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S & F in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as spd and directed by Engr-in-charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed.

S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.

S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed.

Supply & Fixed in repairs 15mm Sink Mixer complete as specified and as directed. .

S&F in repair Pillar tap fancy type cast copper alongwith capstan heads, chromium plated,swan neck, screwed down high pressure , with or without lettered ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe size 15mm. complete all as specified and directed

S & F in repair brass Chromium plated shower rose 150x150 mm size with or without swivel joints, any size with arms , including fixing to steel pipe or union complete all as specified and directed

S&F in repairs CP wall mixer 3-in-1 system with complete provision and fixing for Overhead Shower with 115 mm Long Bend pipe,CP screwed down high pressure with long screwed both enfs for 15mm dia bore GI pipe complete of approved make as per sample all as specified and Directed.

S&F in repair 15mm bore, Bib cock, PTMT, any colour, high pressure, screwed for iron pipe, minimum weight 120 gms. or equivalent as approved by GE.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and Directed.

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and Directed.

S&F in repair PVC connections 15mm dia and 600mm long with PTMT nuts all as spd and directed.

S&F in repair PVC connections 15mm dia and 900mm long with PTMT nuts all as spd and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair stainless steel plate rack overall size 90 x 75 X 25 cm made out of 0.63mm thick steel sheet as per standard pattern fixing to walls with screwed complete all as specified.

Supply and fixed in repair PVC waste pipe 32mm bore of size and 900mm long complete all as specified and directed.

S&F in repair only 75 mm waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 110 mm, waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair CP grating 125mm dia circularand fixing with cement mortar 1:3 complete all as specified and directed.

S&F 15mm GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors, incl taking down all as specified and directed by EIC.

S&F 20mm GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors, incl taking down all as specified and directed by EIC.

S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder of size 130x140x100mm and weight 320gm complete all as specified and directed.

S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges 300mm wide with hookes all as specified and directed.

S&F, in repair chromium plated tubular towel rail 20mm dia 600mm long Complete all as specified and directed..

S&F in repair Towel ring round with round flange 164x53x45mm and 8mm thick complete .

S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Complete all as specified and directed

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer in charge

Cleaning of water pipe line in GI pipe dia of 15mm to 25mm and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

Petty reapirs to Syphon kit of high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge.

S&F, in repair, 10 ltrs capacity PVC valveless, syphonic action, type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and flush pipe to pipe or lever etc complete all as specified and directed.

S&F, in repair, vitreous china floor mounted singel peace WC with PP soft close seat cover , hinges accessories set as per size 375x660x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs complete and directed.

S&F in repair vitreous china squatting pan (orrisa pattern) size 580x440 mm(white) with CI 'P' or 'S' trap, intehral foot rest including trap set include complete concrete & flushing pipe complete all as specified.

S&F in repair Vitreous china wash hand basin white flat back size 550x400mm including brass waste coupling, PVC waste pipe and plug and porcelain stopper brackets of angle 35x35x5mm and cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F in repair old plastic cover of rotational moulded polythene water storage tank of capacity exc 250 ltr but n exc 1000 ltr including locking arrangement to other end etc Complete all as specified

S&F in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed.

Supply and fix Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed.

S&F, in repair, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -455 Gms)

S&F, in repair, 40mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

M&L, in repair, 75/100 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radiucomplete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair GI Elbow, Socket, Tee, Reducer elbow/socket/Tee, tank Nipple, Union, standard nipple, Hex Nipple, Nipple 50/75/100/150 mm for 15mm bore GI Pipe female/male threaded as required at site for fixing in reapir to existing GI pipe only to arrest leakage and making it fully functional complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank three layered other than black coloured (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank three layered other than black coloured (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair brick work or concrete surfaces of walls , finished even and smooth without using extra cement incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed

M&L for damproofing to wall with two componet Acrylic polymer cementitious water proof elastomeric coating food grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joits of Fibre mesh not be less than 100mm , then finally apply second layer mix by brush to entire surface of container covering 0.6-0.75sqm /kg at 1mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. Make Make Pidilite Industries Ltd /Fosrock India Ltd /IWL India Ltd , BASF/T-Guard ANTC of make Thermax complete as per specification and directed by GE . (iii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 6 mtr shall be mandatary and deemed to be inclusive in quoted rates. complete all as specified and directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white or tinted) complete all as specified.

M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with and including water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed.

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg /sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and e colour of tiles, incl dismantling / demolition over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding , complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:6) over 15mm thick and jointed grouted flush pointing in cement Motar (1:3) completed all as specified and directed.

Description all as per item ser No 103.00 above but except bricks tiles complete all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 1000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m.

M&L of 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course including dismantiling of old PCC complete all as specified and directed

M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed.Make : Asian paint, Sika, Fosroc

M/s Vijay Construction Co. (BID ID -3093478)

KARACHI ELECTRIC & TRADING CO. (BID ID -3093364)

Bharatbuilder (BID ID -3093456)

AS CONSTRUCTION (BID ID -3093399)