Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹77.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹78.5 L+₹1.5 L (1.90%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Found Ineligible | |
| 4 | Rejected-Technical 102 SAI APPARTMENT SIMROL ROAD DREAMLAND MHOW INDORE MADHYA PRADESH 453441 INDIA | INDORE | MADHYA PRADESH | 453441 | - | Rejected-Technical Found Ineligible |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
4 Oct 2024, 12:00 pmClosed
Superintending Engineer
Office of Superintending Engineer, VII Circle Irrigation Works, Sarojni Naidu Marg, Lucknow.
Restoration and Demarcation work of canal land from km. 0.000 to km 10.552 of Semrouta Dy. in district Raebareli and Amethi. (LOT-01)
2024_UPIDC_959998_1
01/SE-VII/2024-25
Open Tender
Civil Works - Canal
Item Rate
270 days
Raebareli
Please refer Tender documents.
2 documents required · 2 mandatory
₹848
₹1.7 L
31 Dec 2024
27 Sept 2024
4 Oct 2024
27 Sept 2024
4 Oct 2024
27 Sept 2024
Amount
Dry earth work in excavation of masonary work on channel of discharge below 10 cumecs including lead lead up to 30 M lift up to 1.50 M and its disposal and back filling.
E/W in cutting/filling in remodling of distributary by hydrolic excavator having capacity 25 Cum/Hr including all lead, lift, proper disposal, rough dressing & mannual compaction all complete the work as per direction of Engineer-in-charge
Earth work in dosposal of surplus earth by Power Transport at a distance of 7K away from site of work including loading of excavated earth, cartage, unloading, mannual compaction & rough dressing etc. all complete the work as per direction of Engineer-in-charge
Daula dressing of Dys. in required shape & size etc. all complete the work as per direction of Engineer-incharge
P/L Cement conctreate 1:2:4 M 15 with 4.75 to 20 mm aggregate well mixed and laid I position complete i/c all leads of all construction materials i/c curing and finishing having well graded crusher broken stone aggregate
Centering and shuttering for .C.C. work including of cost of shuttering, material and T & P etc. required for proper completion of work.
R.C.C./C.C. work with cement, approved coarse sand and stone grit in the proportion of 1:1.5:3 including supply of all materials labour and T&P etc. requred for proper completion of work.
P/L C.C 1:3:6 in Foundation with cement coarse sand and stone aggrigate 25 mm to 40 mm nominal size i/c all material labour T&P etc. Required for proper complition of work as per direction of Engineer-in-charge
Brick Work 1:4 in cement coarse sand morter including curing and all material and T&P etc. required.
Cement pointing on 1:2 Cement and fine sand mortor including supply of material, labour and T&P. etc. all complete the work. As per direction of Engineer-in charge.
Making sub grade in linning work including watering, compaction and preparation of surface.
P/L LDPE film of 200 micron I/C cost of all labour and material and T&P required for proper completion of work
Providing and laying 75mm thick Cement concrete lining in M-15 with 4.75mm to 20 mm well graded stone aggregate well mixed and laid in position complete including cost of all materail lead & lift, curing and lobour & T&P for proper complition of work as per direction of Engineer-in-charge
Painting two coat of synthetic enamel paint on old surface with superior quality approved make including cost of all Iteincluding cost of all material labour T&P etc. required for proper completion of work. As per IDSOR Ch. XIII I.No. 14
Supply of Fe-500 TMT bars at site per M.T
Jungle clearance cutting behoya gondi grass elephant grass etc.
Writing letter on Gauge & boundry pillars above 50 mm size but below 80 mm size as per IDSOR CHAPTER XIII SR 34 (L)
Distempering with dry distemper of approved brand (two coat) over one priming coat of whiting on new surface after thoroughly brushing the surface free from dropping and other foreign matter including preparing the surface even and sand papered smooth including cost of all material labour, T&P etc.
Reparing of Gate of Dy. & Mrs.
(A) Supplying & fixing 8 mm thick iron plate (4.5” x 4.5”) size in inch with cutting & making required groove for proper fitting of bearing to complete the job.
(B) Supplying & fixing bearing (no.- 16 or 21) to complete the job
(C) Supplying & fixing 40 mm size dia. With making required Square thread on lathe machine to complete the job.
(D) Supplying & fixing chuk nut (4” x 3”) to complete the job.
(E) Supplying & fixing handle 40 mm dia G.I. pipe for operate the gate to complete the job.
(F) Supplying & fixing grease for over whaling to complete the job.
(G) Arrangement of Generator Set, welding machine, gas cutter & other required T&P with mechanic, Welder, labour for cutting of various parts of gate & refitting of gate parts, including loading & unloading to complete the job.
sri durga shakti traders
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .