CLEANING REPAIR AND MAINT OF SEWAGE LINE SEPTIC TANK MAN HOLES SOAK WELLS COVER SLABS AT BAIRAGARH AREA AND REPAIR REPLACEMENT OF WATER SUPPLY INSTALLATION PUMP SETS BORE WELL AND ALLIED WORKS AT SI LINES UNDER GE BHOPAL

Amount

Note: This work comprises of (i) CLEANING/ REPAIR AND MAINT OF SEWAGE LINE, SEPTIC TANK, MAN HOLES, SOAK WELLS, COVER SLABS AT BAIRAGARH AREA (ii) REPAIR REPLACEMENT OF WATER SUPPLY INSTALLATION, PUMP SETS, BORE WELL AND ALLIED WORKS AT SI LINES The qty of individual part shall not vary beyond deviation limit specified in tender.

CLEANING/ REPAIR AND MAINT OF SEWAGE LINE, SEPTIC TANK, MAN HOLES, SOAK WELLS, COVER SLABS AT BAIRAGARH AREA

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5m but not exceeding 3m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed of following internal dia:-

100 mm dia

150 mm dia

200 mm dia

300 mm dia

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

S&F salt glazed stoneware drain pipes, grade ‘A’, ISI marked, (IS 651 - 2007) laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed for the following internal dia :-

M&L for reinforced concrete pipes, class NP 2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

Removal of surplus spoil/excavated material to a distance upto 50 m and depositing where directed at a level n exc. 1.5 m above the starting point omplete all as specified and directed.

Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to walls including clamps of the following bore :-

S&F in repair PVC (SWR) bend of the following bore :-

S&F in repair PVC (SWR) junction single (single 'T') equal or unequal of the following bore :-

S&F in repair PVC (SWR) vent cowl for following bore:-

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing to waste pipe fixed with solvent cement

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (20 mm graded aggregate) as in floor to receive floor finishes, complete all as specified and directed.

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed. [MAKE: SOMANY/ KAJARIA/ ORIENT/ JOHNSON]

M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ ORIENT/ JOHNSON]

S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE as approved by GE.]

S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE]

S&F in repairs 32mm PVC Urinal waste pipe 80cm long complete all as specified and directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc omplete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (Using 20 mm graded aggregate) as in coping, channel, benching of manhole laid to shape and slope and finished even and smooth using extra cement including weathering, throating and necessary form work complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 on brick walls or concrete surfaces and in any position including finishing the surfaces fair and even (without using extra cement), complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for Mild steel TMT Bar 6 to 8mmm dia cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire (anneled ) not less than 0.9mm dia or securing with clips quality confirming complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. (Note:-Reinforcement to be measured separately).

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) using 20mm graded aggregate Type A1 1:1.5:3 on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Cleaning and de-sludging of existing septic tanks/deep manholes any depth including taking out sludge in any form alongwith all other forign materials by mechanical equipment or manually or by way of any other suitable means with taking all precautionary measures including removal of sludge and other foreign materials out side Defence land by any means complete (working in foul condition) all as specified and directed.

Cleaning of all blockage of any type of sewage line ie branch sewer line, main sewer line etc, manholes of any size and depth, in any situation by way of cleaning/desludging by manually or mechanically or by way of any other suitable means including foreign materials as well as rodding (full through) of sewer lines and between the blocked manholes where required and ordered by Engineer-in-charge and keeping the sewage line all time functional; cleaning traps, water closet, soil waste/vent pipe, gully traps etc complete upto final drop out let into septic tanks or central sewage treatment plant and/or soakage well (working in foul condition) with taking precautionary measures with necessary equipment as required and applicable all as specified and directed. The sludge removed from the manholes and sewage line shall be removed to out side Defence land complete all as directed by Engineer-in-charge Contd.../-

Item 34.00 contd/- in entire Bairagarh Military Station i.e., various units area and single living Accn of 3 EME Centre(all Bns & Coys), 5221 ASC Bn, 1010 Tpt Coy, Military Dental Centre Bhopal, 194 FWC, 4021 Fd Hosp, 21 Corps HRDC, 68 Engr Regt, 755(I) Tpt Coy, GE Bhopal, AGE E/M, Sup Depot, ECHS, MH Bhopal, 21 CGSR, JCOs/OR Md Accn at Panama and CTO colony, Offrs Md Accn at Vijay Enclave, Old Sanchi, Sanchi Enclaves & CTO, Civ Md Accn at CTO. Note : Note 1 : Contractor will deploy 05 (five) Nos safaiwala and 01 (one) supervisor per working day in the MES office/complaint cell and will report to the concerned JE/Engineer-in-Charge daily at 9.00 AM to 5.00 PM. Note 2 : If any of the Safaiwala/Supervisor fails to report daily to the concerned authority, a sum of Rs. 700/- will be deducted per person/day from the payment of the contractor. Note 3 : The Safaiwala will always be in posession of the cleaning tools like 6mm MS round bar/rod, plain flexible bamboo pieces and cleaning pump with wooden/PVC handle. The rate quoted is deemed to be inclusive of the cost of T&P for maintenance/cleaning work. Note 4 : The Trades man deployed shall be paid as per minimun wages applicable, in their Aadhar linked bank account and insurance cover shall be provided.

REPAIR REPLACEMENT OF WATER SUPPLY INSTALLATION, PUMP SETS, BORE WELL AND ALLIED WORKS AT SI LINES

Taking out unserviceable/brunt parts including 3phase electrical connection, S&F Power Contactor ML-6 3pole, 415 V, 50Hz, 3Phase 2NO+2NC complete all as specified and directed. Make :- L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, S&F Power Contactor ML-4, 3pole, 415V, 50Hz, 3 Phase 2NO+2NC complete all as specified and directed. Make :- L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, S&F Thermal overload relay (MN-5), with relay setting range (Amp) 45-75, 415V, 50Hz, 3Phase complete set complete all as specified and directed. Make :- L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, S&F Thermal overload relay with setting range (Amp) 30-50, 415V, 50Hz, 3 Phase complete set, complete all as specified and directed. Make :- L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, S&F Power Contactor ML-3, 3pole, 415V, 50Hz, 3 Phase 2NO+2NC complete all as specified and directed. Make :- L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, Supply & replacement of DOL Starter 415 Volt suitable for 7.5 HP motor Relay range-20-32 Amp complete all as specified and directed. Make : Havells/L&T/HPL/Bentex/L&T

Taking out unserviceable/brunt parts including 3 phase electrical connection, Supply & replacement of electronic Timer for Star Delta Starter type timing range 3-30 sec complete all as specified and directed. Make: Havells or equivalent.

Taking out unserviceable/brunt parts including 3 phase electrical connection, Supply & replacement of Single Phase Preventor (6 wire 415 volt) HP complete all as specified and directed. Make-Minilec/Havells/Surya/L&T

M&L for taking out unserviceable submersible pumping set complete with GI pipe any capacity and any type from existing bore well carefully without damaging the pumpset including connecting parts and lowering the same after repair including provision of suitable size of nut & bolts with washer and suitable packing for column pipes and connection of submersible cable complete all as directed by Engineer -in-Charge. NOTE: (a) Chain pully block and clamps etc shall be provided by the contractor. (b) Necessary safety pracaution will be responsibility of the contractor (c) Quoted rate shall be deemed to include 3 phase electrical connection.

Dismantling of Centrifugal/submersible/Monoblock/Pressure motors and taking out unserviceable spares and burnt copper binding wire complete. M&L for rewinding of submersible motor with insulated copper winding wire including sleeves as per original company and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testing & transport charges complete all as specified & directed by EIC (Parts for following items shall be paid under relevent item here-in-after).

50 HP motor

30 HP motor

25 HP Motor

10 HP motor

5 to 7.5 HP motor

3 HP Motor

0.5 HP to 2 HP pressure Motor

Dismantling, removing centrigual pump set of capacity 7.5 -10 HP pump set with motor and taking out electrical connection taking for Servicing of pump motor to workshop for machining, complete greasing, changing gland packing, minor parts like rubber/steel bushing, nut bolts and re fixing the same to there same position with necessary fixing arrangement complete all as specified and directed. Note- all required T&P shall be arranged by the contractor. The Quoted rate shall be deemed to included the same.

S&F following parts of the submersible pump /centrifugal pump set for capacity between 7.5-10 HP of original company as approved by Engineer-in-charge. Make-Kirlosker

Bowl bush

Impeller

Neck ring

Shaft sleeve

Pump shaft

Coupling

Coupling key

Impeller key

Stud with nuts

Thrust bearing

Lower housing bush

Upper housing bush

Rotor shaft sleave

Drain plug

Water seal

CI Bowl

Rotor Shaft

Dismantling, removing centrigual pump set of capacity 25 HP pump set with motor and taking out electrical connection taking for Servicing of pump motor to workshop for machining, complete greasing, changing gland packing, minor parts like rubber/steel bushing, nut bolts and re fixing the same to there same position with necessary fixing arrangement complete all as specified and directed. Note- all required T&P shall be arranged by the contractor. The Quoted rate shall be deemed to included the same.

S&F spares accessories for centrifugal pump set of 25 HP capacity complete all as specified and directed. Make: kirloskar

CI Impellar

Shaft S/Steel

Shaft Sleeve

Impellar Key

Impellar check nut

Impellar ring Ci inter stage ring

Gland cap/Split gland

Eye bolt

Ball bearing as per existing . Make SKF/NBC/Tata

Pump bush

Motor Air fan

Metallic gland packing 10/12mm

Bearing grease

Bearing housing

Dismantling, removing centrigual pump set of capacity 30 HP pump set with motor and taking out electrical connection taking for Servicing of pump motor to workshop for machining, complete greasing, changing gland packing, minor parts like rubber/steel bushing, nut bolts and re fixing the same to there same position with necessary fixing arrangement complete all as specified and directed. Note- all required T&P shall be arranged by the contractor. The Quoted rate shall be deemed to included the same.

S&F spares accessories for centrifugal pump set of 30 HP capacity complete all as specified and directed. Make: kirloskar

CI Impellar

Shaft S/Steel

Shaft Sleeve

Impellar Key

Impellar check nut

Impellar ring Ci inter stage ring

Gland cap/Split gland

Eye bolt

Ball bearing as per existing . Make SKF/NBC/Tata

Pump bush

Motor Air fan

Metallic gland packing 10/12mm

Bearing grease

Bearing housing

Dismantling, removing centrigual pump set of capacity 50 HP pump set with motor and taking out electrical connection taking for Servicing of pump motor to workshop for machining, complete greasing, changing gland packing, minor parts like rubber/steel bushing, nut bolts and re fixing the same to there same position with necessary fixing arrangement complete all as specified and directed. Note- all required T&P shall be arranged by the contractor. The Quoted rate shall be deemed to included the same.

S&F only spares accessories for centrifugal pump set of 50 HP capacity complete all as specified and directed. Make: kirloskar

CI Impellar

Shaft S/Steel

Shaft Sleeve

Impellar Key

Impellar check nut

Impellar ring Ci inter stage ring

Gland cap/Split gland

Eye bolt

Ball bearing as per existing . Make SKF/NBC/Tata

Pump bush

Motor Air fan

Metallic gland packing 8/10mm

Bearing grease

Bearing housing

Pump shaft

Disconnecting the electrical and pipe connection of existing pressure motor /Mono block pump set of capacity 0.5 to 3 HP and S&F following spare GI/UPVC parts in repair and making the pump sets completely functional to the entire satisfaction of EIC complete all as specified and directed.

S&F spares accessories for centrifugal pump set of 0.5 to 3 HP capacity complete all as specified and directed. Make: kirloskar

Bearing (make SKF)

Rubber kit

Auto cut off switch/Pressure switch

Non return valve

Gate valve 25mm

Bladder

Steel tank

Supply and replacement of submersible cable 3 core of suitable size 6 sq mm complete with suitable clips complete all as specified and directed..

30 HP Relay Range-14-23 Amp

50 HP Relay range-30-50Amp

S&F in replacement ON load Changeover Switch, Rotory type 100 Amp, 415 Volt , TPN, front operated with out sheet metal enclosure suitable for mounting on existing panel as per sample and site requirement complete all as specified and directed. Make-HPL/Havells/L&T

S&F in replacement ON load Changeover Switch,Rotory type 200 Amp, 415 Volt, TPN, front operated with out sheet metal enclosure suitable for mounting on existing panel as per sample and site requirement complete all as specified and directed. Make: HPL/Havells/L&T

S&F in replacement ON load Changeover Switch, Rotory type 63 Amp, 415 Volt, TPN, front operated with out sheet metal enclosure suitable for mounting on existing panel as per sample and site requirement complete all as specified and directed. Make-HPL/Havells/L&T

S&F MCCB, 4 pole, 415 Volt, fixed type 100 amp with breaking capacity 30 kA complete all as specified and directed. Make-L&T

S&F MCCB, 4 pole, 415 Volt, fixed type 160 amp with breaking capacity 36 kA complete all as specified and directed. Make-L&T

S&F for SWR rope of size 10 mm outer dia dor tie/anchoring with submersible pumpset all as specified and directed.

Supply & lowering GI pipes of size 50 mm dia heavy duty grade, long socketed, in boreholes including making necessary threads and all necessary GI fittings required at site, for column pipe of submersible pump set complete all as specified and directed. Note :- GI Pipe will be lowered with cut piece of length not more than 3 metre including necessary cutting and threading and all necessary T&P etc to be arranged by the contractor.

S&F in replacement aviation light on OH tank 15/18/21 staging (on top of OH tank) with all fittings, fixtures and accessories with & including two single core cable with copper conductors of size 2.5 sqmm and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as bends, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter from light to connection points and including 1No. two way MCB DB with 1 No. SPN, 'C' curve, MCB, capacity 10 Amp, 10 kA complete all as specified and directed.

M&L for preparation of iron/steel surfaces of rising main, delivery, overflow and washout pipes of internal dia 200mm, 150mm,100mm respectively of OH tank of any capacity and height; and applying two coats of synthetic enamel paint (Blue, green, red and yellow colour/tint as approved) including marking with arrows (directions of flow) and writing date of cleaning with white synthetic enamel paint over black synthetic enamel paint background ( approx size 300 mmx300 mm) complete all as specified and directed.

M&L for maintenance and cleaning of surrounding areas of water supply installations, pump house, etc by cutting all bushes, shrubs, sarkandas and any other types of vegetations and trees girth upto 30 cm and trimming the earth surface to make good soil depressions; removing and disposal of the waste retrieved to a distance not exceeding 100m and taking all precaution complete all as specified and as directed.

Scrapping/complete removal of old painted surfaces (inner & outer) of 7.5/ 10HP motor and other related connected fittings/ accesspries, eg. pipes, valves, etc and M&L for spray painting the surface with synthetic enamel paint, one or more coats, as required and writing SM/MES NO in different tint complete all as specified and directed.

Scrapping/complete removal of old painted surfaces (inner & outer) of 30 / 25 HP motor and other related connected fittings/accesspries eg. pipes, valves, etc and M&L for spray painting the surface with synthetic enamel paint, one or more coats, as required and writing SM/MES NO in different tint as directed complete all as specified and directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm normal corss section 3.5 core laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers complete all as specified and directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm normal corss section 4 core laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers complete all as specified and directed.

S&F building security light fitting 35 watt, 230 v, AC made up of pressure die cast aluminium housing with high effcient LED as lighting source and PC over having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with suitable galvanized iron pipe “light grade” brackets-1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

Scrapping/complete removal of old painted surfaces (inner & outer) of 50 HP motor and other related connected fittings/accesspries eg. pipes, valves, etc and M&L for spray painting the surface with synthetic enamel paint, one or more coats, as required and writing SM/MES N0 in different tint as directed complete all as specified and directed.

S&F 1100 volt grade heavy duty Service cable with PVC insulated Copper conductor wire and overall PVC sheathed of size 16 Sqmm normal cross section single core laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs 41283.00

M/S Shanti Enterprises

NIHAL ENTERPRISES

PADAMSHRI CONSTRUCTION CO

PRAGATI ELECTRICALS AND ELECTRONICS

RAJPATI CONSTRUCTION