Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹8.3 L+₹50,000 (6.43%)Admitted-Finance 21 2 BAJE SHIBPUR 2ND BYE LANE HOWRAH 711 102 | HOWRAH | WEST BENGAL | 711102 | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GHOSH ENTERPRISE L2 | Maa Vindhyawasni Enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | The entire ship, from the LWL to the main deck — including deck plates, superstructure, bathroom, anchor, engine room, store rooms, spud, spud bracket, carriage, vents, cutter ladder, bollards, deck crane, railings, jet nozzles, railing pipes, and all external fittings — to be thoroughly cleaned, scraped, wire-brushed, chipped, and painted with three coats of marine paint in the existing color scheme (one coat of zinc chromate primer followed by two coats of marine paint). All pipelines to be painted and subsequently labeled with stickers as per the standard marine color code. Upon completion, the vessel’s name, department name, and logo shall be painted as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC). | 1,200 | Sqm | 300 ₹3,60,000 | 190 ₹2,28,000 Lowest |
| 2.00 | Cropping and renewal of deck plates, bollards, wheelhouse roof, ship side plates, and straightening of railing pipes as required, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC) | 0.25 | Ton | 16,000 ₹4,000 Lowest | 1,70,000 ₹42,500 |
| 3.00Servicing, testing, and repairing/renewal of the flushing (gland) pump attached to the dredge pump engine, Make: BE, Model No. M823KK.1B, to achieve the required pressure, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC) | |||||
| 3.10 | Labour charge | 1 | comp. job | 6,000 ₹6,000 Lowest | 25,000 ₹25,000 |
| 3.20Cost of spares on actual plus 10% basis. | |||||
| 4.00Heat exchangers of the main engine and auxiliary engine (CAT Model No. 3508 and Model No. 3306) are to be tested and serviced as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC). | |||||
| 4.10 | Labour charge | 2 | Nos | 15,000 ₹30,000 Lowest | 17,500 ₹35,000 |
| 4.20Cost of spares & machining charges on actual plus 10% basis. | |||||
| 5.00Quick closing valve to be serviced and made operational as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC | |||||
| 5.10 | Labour charge | 2 | Nos | 5,000 ₹10,000 Lowest | 8,000 ₹16,000 |
Tender Value
₹22.1 L
EMD Value
₹44,265
Closing Date
1 Aug 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
IWAI, GAIGHAT, GULZARBAGH, PATNA- 800007
E-Tender for Annual Afloat repair of CSD Tizu at Patna (NW-1) for the year 2025-26.
2025_IWAI_870516_1
12-IWAI/ENGG/P(157)2025-26
Open Tender
Marine Works
Works
30 days
NW-1
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
Yes
IWAI FUND
₹44,265
Yes
12 Aug 2025
25 Jul 2025
2 Aug 2025
26 Jul 2025
1 Aug 2025
26 Jul 2025
Amount
The entire ship, from the LWL to the main deck — including deck plates, superstructure, bathroom, anchor, engine room, store rooms, spud, spud bracket, carriage, vents, cutter ladder, bollards, deck crane, railings, jet nozzles, railing pipes, and all external fittings — to be thoroughly cleaned, scraped, wire-brushed, chipped, and painted with three coats of marine paint in the existing color scheme (one coat of zinc chromate primer followed by two coats of marine paint). All pipelines to be painted and subsequently labeled with stickers as per the standard marine color code. Upon completion, the vessel’s name, department name, and logo shall be painted as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Cropping and renewal of deck plates, bollards, wheelhouse roof, ship side plates, and straightening of railing pipes as required, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Servicing, testing, and repairing/renewal of the flushing (gland) pump attached to the dredge pump engine, Make: BE, Model No. M823KK.1B, to achieve the required pressure, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Labour charge
Cost of spares on actual plus 10% basis.
Heat exchangers of the main engine and auxiliary engine (CAT Model No. 3508 and Model No. 3306) are to be tested and serviced as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Quick closing valve to be serviced and made operational as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
All hydraulic line hoses and associated leakages are to be inspected and renewed, if required, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Cutter teeth are worn out and shall be renewed by welding with material of the same composition, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC). Cutter teeth to be supplied by IWAI.
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The cutter hydraulic pump seal leakage and associated hydraulic lines are to be serviced, the leakage arrested as per the OEM manual, and the system made operational as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The spud hoisting/lowering lever, speed controllers for the cutter ladder, spud carriage, and spud hoisting/lowering system; speed controller and dredge discharge pressure meter; all measuring gauges/meters in the wheelhouse; spud carriage position gauge; spud carriage in/out push-button switch; two spud operating levers/joysticks; auxiliary spud free-fall mechanism; and the dredge pump clutch engagement/disengagement lever are malfunctioning. All components shall be inspected, calibrated (where applicable), defects rectified, and restored to full operational condition as required, in accordance with the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The VHF set make - SAILOR is not working and is to be repaired or renewed as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Air Compressor (Make: Ingersoll Rand, Model No. 231, Capacity: 20 Cu.m/hr @ 30 bar, Serial No. 84000048) is to be top overhauled with renewal of spare parts. System valves and relief valves are to be checked and repaired or renewed, if required, and a pressure test shall be conducted as per the maintenance manual and as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The entire electrical and electronic systems — including AC/DC lines and wiring, distribution boxes, panels in the engine room, wheelhouse, and toilet (lights, fans, etc.), engine room lighting (including emergency lights), DC horn, battery charger, switchboards, bilge sensors, general lighting, navigational lights, searchlight, halogen lights, and light covers — to be thoroughly inspected and rectified or renewed, if required, as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Hydraulic system solenoid valves and solenoid blocks to be checked and calibrate and also leakage of hydraulic oil from system pipes & valves to be arrested as per direction of IRS/IWT Surveyor and EIC.
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Fabrication and installation of the damaged deck shed above the engine room, including structural steel framework, good-quality metal colour coated corrugated sheets, fasteners, and all necessary materials and labor, shall be carried out and completed in all respects as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC).Size- 21 X 21 Feet
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Hydraulic cooler mounted/fitted and hydraulic filters is to be serviced and repaired, with renewal of spares (if required) as per direction of IRS/IWT Surveyor and EIC.
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The discharge jet nozzle is damaged and to be repaired through build-up welding or re-manufactured as per the existing sample, in accordance with the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
All grease lines and lubrication points, including nipples, ladder pulley greasing lines, and associated valves, are to be inspected and serviced. Replacement of piping, adapters, nozzles, tubes, coupling nuts, connectors, screw sleeves, couplers, nipples, and other related fittings to be carried out as required, in accordance with the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
The swing anchor pulley bush and pin on both port and starboard sides are damaged and to be checked, serviced, repaired, or renewed (if required), as per the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
The tail coupling gland and foundation of the dredge pump discharge pipeline, along with associated gland leakage, are damaged. The components to be repaired or renewed as necessary, and the coupling to be reinstalled in its original equipment (OE) position and made fully operational, in accordance with the directions of the IRS/IWT Surveyor and the Engineer-in-Charge (EIC)
Labour charge
Cost of spares & machining charges on actual plus 10% basis.
Dredge pump casing, impeller, bush, seal, wear plate, and other associated components are worn out and to be checked and repaired or renewed, if required, as per the directions of the IRS/IWT Surveyor and the Engineer-in- charge (EIC)
Labour charge
Cost of spares on actual plus 10% basis.
GHOSH ENTERPRISE (BID ID -3258916)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .