Supply and install modular furniture for various departments at YCMOU, Nashik and Regional centre, Pune, Nanded, Nagpur, Mumbai.

Table With Side Table (2600 x 2300):-Supplying & Placing Modular table in completely knock down conditions with an overall size 2600mm X 2300mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 2600mm X 1100mm/950mm X 750mm made up of 75mm thick Medium density fibre-board of general purpose of IS 12406 with Red veneer polished as per approved decorative colour. The table top profile shall have round structure with taper edges. The table top shall be supported on MDF base gable end. The end wall of the table on the side shall be topped by gable end. The 75mm thick Gable end shall be provided at both side with an overall size 820mm X 670mm of MDF with veneer polished. The gable end shall be inclined as per table top constructed and edges shall have taper structure. The gable end base shall be made up of MDF with black polished having the size 840mm X 95mm with 10mm thick. The table shall be clad with 12mm thick modesty panel. The modesty panel shall be made up of Medium Density Fibre-board with an overall size 2290mm X 670mm. Modesty panel shall have round profile according to table top structure and shall be polished with leather, It shall have an outer modesty panel for aesthetically design made up of MDF polished with red veneer having the size 1600mm X 370mm with 12mm thick. The edges shall be taper as per approved design. A leather base 6mm thick writing pad shall be provided with an overall size 1100mm/900mm X 400mm. The side storage unit shall be provided with the top size of 1200mm X 600mm X 750mm made up of MDF board with veneer. Storage top and skirting shall be 25mm thick, shutter, facia, adjustment shelf and divider shall be 18mm thick and bottom shall be 9mm thick made up of MDF board of IS 12406. Storage have 4 nos. drawers having size 735mm X 190mm & 735mm X 105mm shall be operated with the assistance of 400mm soft-close telescopic channel runs on ball bearing telescopic channel having load capacity 35kg, 1 nos. shelf having size 395mm X 530mm shall be adjustable type. All drawers shall have simultaneous locking property with the assistance of central locking mechanism and having leather base handle. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom with size 1160mm X 50mm and 520mm X 50mm with 25mm thick and black polished. Pedestal shall be provided with an overall size 600mm X 600mm X 650mm. The drawer top and side shall be 25mm thick, bottom, back and side panels including the drawer facia is made up of 18mm thick and drawer base shall be 9mm thick made up of MDF board of IS 12406. The top edges shall be taper structure. The drawer boxes shall be operated by 400mm bottom channel sliding roller to smooth operation having load carrying capacity 20 Kg. The drawer shall have centralize locking mechanism and leather base handle. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2400 x 1700):-Supplying & Placing Modular table in completely knock down conditions that is to be assembled at site. The worktop shall have 60mm thick made up of Medium Density Fibre-board with approved veneer Polish and at centre with Leather covering. The table top profile shall have round structure with waterfall edges. The table top shall be supported on MDF board based Capsule Shape Box One Side in PU Finish & duly deco painted. The end wall of the table on the other side shall be topped by 1D+1S Pedestal 350LX600DX700HT in 18mm thick MDF Board Based & Complete body, Fascia, Shutter, Internal Box & in moulded construction with full round post forming edges and duly deco painted. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick medium density fibre-board in PU FInish. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose e with Curved shaped door . The drawer shall be operated with finger groove Handle and easily close & open with the assistance of sliding channels to enable smooth operation and sliding rail track and concealed crank hinge. Storage External Body, Drawer fascia & Shutter in MDF Veneer Finish, sides shall be made up of MDF base board with Veneer Polish and Top, Bottom, Skirting, & Internal Partition, Drawer Box in 18mm MDF Based in PU Paint FInish. Storage to have Lock & Wireless Charger. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The complete structure shall be supplied with approved veneer laminate, PU polish and deco painted. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2100 x 1800):-Supplying & Placing Modular table in completely knock down conditions with an overall size 2100mm X 1800mm X 750mm that is to be assembled at site. The top shall have the size 1900mm X 900mm made up of 45mm thick mdf venner . The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on 75mm Peg mounted over side storage unit and fixed pedestal. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 45mm thick profile shall be in linear shape . The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The table shall have side unit for storage purpose with an overall size 1800mm X 510mm X 625mm. The side unit shall be made up top and side 45mm thick and drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, etc. It shall have 3 drawer and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A hanging pedestal shall be provided with an overall size 455mm X 685mm X 485mm. The pedestal shall be made up of Pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. The pedestal shall have 2 nos. of drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of sliding channels to enable operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2100 x 1800):-Supplying & Placing Modular table in completely knock down conditions with an overall size 2100mm X 1800mm X 750mm that is to be assembled at site. The worktop shall have the size 2200mm X 950 mm x 76mm thick made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The table top profile shall be in rectangle shape with round corners and full round post forming edges. The table top shall be supported on MDF board based gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 76mm thick medium density fibre-board and profile shall be in moulded construction with full round post forming edges and duly deco painted. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick medium density fibre-board in linear shape with appropriate PVC edge banding and veneer laminate. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 1900mm x 500mm X 600mm. It shall have 2 nos. of drawer, 1 nos. of filling space with door and 1 nos of open space . The drawer shall be operated with profile handle and easily close & open with the assistance of sliding channels to enable smooth operation and sliding rail track and concealed crank hinge. Drawer facai, sides and all other shall be made in 18mm thick and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The complete structure shall be supplied with approved veneer laminate, PU polish and deco painted. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (1500 x 750):-Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 1500 mm X 1800mm X 750mm that is to be assembled at site. The worktop shall have made up of 25mm thick Pre-laminated MDF board with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20m with 1.6mm thick duly powder coated. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated mdf board in linear shape with appropriate PVC edge banding. The table understructure shall consist of CRCA rectangle pipe leg (loop leg) and (U-type leg) having cross-section area 40mm X 10mm and 95mm X 25mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1800mm X 580mm X 430mm. It should be made up of Pre-laminated mdf board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 3 drawer and 1 sliding shutter which is operated on ball bearing channel to enable smooth operation, SS handle and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The credenza unit shall be mounted on CRCA rectangle pipe frame leg having cross-section area 40mm X 10mm with 1.5mm thick. The complete metal parts shall be duly powder coated to the thickness 50-60µ dry film thickness. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (1500 x 750):-Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 1350mm X 1500mm X 750mm that is to be assembled at site. The worktop shall have made up of 25mm thick Pre-laminated mdf board of . with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20m with 1.6mm thick duly powder coated. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick board in linear shape with appropriate PVC edge banding. The table understructure shall consist of CRCA rectangle pipe leg (loop leg) and (U-type leg) having cross-section area 40mm X 10mm and 60mm X 25mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1500mm X 500mm X 430mm. It should be made up of Pre-laminated board of . with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 3 drawer and 1 sliding shutter which is operated on ball bearing channel to enable smooth operation, SS handle and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The credenza unit shall be mounted on CRCA rectangle pipe frame leg having cross-section area 40mm X 10mm with 1.5mm thick. The complete metal parts shall be duly powder coated to the thickness 50-60µ dry film thickness. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (2400 x 1700):-Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 2400 mm X 1700mm X 750mm that is to be assembled at site. The worktop shall have made up of 25mm thick Pre-laminated MDF board with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20m with 1.6mm thick duly powder coated. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated mdf board in linear shape with appropriate PVC edge banding. The table understructure shall consist of CRCA rectangle pipe leg (loop leg) and (U-type leg) having cross-section area 40mm X 10mm and 95mm X 25mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1800mm X 580mm X 430mm. It should be made up of Pre-laminated mdf board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 3 drawer and 1 sliding shutter which is operated on ball bearing channel to enable smooth operation, SS handle and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The credenza unit shall be mounted on CRCA rectangle pipe frame leg having cross-section area 40mm X 10mm with 1.5mm thick. The complete metal parts shall be duly powder coated to the thickness 50-60µ dry film thickness. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Table With Side Table (3000 x 750):-Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 3000 mm X 2100 mm X 750mm that is to be assembled at site. The worktop shall have made up of 25mm thick Pre-laminated MDF board with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20m with 1.6mm thick duly powder coated. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated mdf board in linear shape with appropriate PVC edge banding. The table understructure shall consist of CRCA rectangle pipe leg (loop leg) and (U-type leg) having cross-section area 40mm X 10mm and 95mm X 25mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1800mm X 580mm X 430mm. It should be made up of Pre-laminated mdf board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 3 drawer and 1 sliding shutter which is operated on ball bearing channel to enable smooth operation, SS handle and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The credenza unit shall be mounted on CRCA rectangle pipe frame leg having cross-section area 40mm X 10mm with 1.5mm thick. The complete metal parts shall be duly powder coated to the thickness 50-60µ dry film thickness. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal.

Conference Table (4200 x 1200):-Supplying & Placing Conference table in completely knock down conditions with an overall size 4200mm X 1200mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix, dowels, pins and brackets. The worktop shall have the combination of MDFand veneer . The hall be made up of 43 mm thick mdf veneer with deco matt finish. The table top profile shall be boat like shape with round corners. . Single sided Flip-up box should be enclosed at table top that houses video, audio, data and power connection discretely. Wire carrier shall be provided below the table top for power connection made of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. The table shall be supported on gable end. The end wall of the table on the side and mid shall be topped by gable end. It should be made up of 36mm thick mdf veneer board and profile shall be in linear shape The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick . There shall be buffers provided at the base to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.

Conference Table (4200 x 1200):-Supplying & Placing Reception table in completely knock down conditions with an overall size 4200 mm X 820mm X 1000mm that is to be assembled at site. The top shall have made up of 49mm thick Pre-laminated MDF board of . with approved laminate and finish as per approved shade. The upper top shall have 49mm thick. The top profile shall be in rectangle shape with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The side edges shall be covered with die casted aluminium profile. The table top and upper top shall be supported on particle board base strip. The table shall have a front panel 49mm thick Pre-laminated mdf board. A wire manager cap shall be provided on the top of the table for power connection. The end wall of the table on the side shall be topped by gable end. It shall be made up of 49mm thick Pre-laminated mdf board and profile shall be in linear shape with one clipped corner and covered by Aluminium profile. There shall be buffers provided to avoid the scratches on the floor. The table shall be clad with 49mm thick modesty panel which provide structural support for the table. It should be 49mm thick Pre-laminated mdf board in linear shape with appropriate PVC edge banding and covered by aluminum profile connected with both end.