REPAIR TO VARIOUS TYPE OF DOORS WINDOWS, VENTILATORS CUPBOARD GRILL GUARD BARS OTHER JOINERY WORKS VARIOUS TYPE OF ROOFING CEILING WORK AND ASSOCIATED WORKS IN AREA-I UNDER GE KAMPTEE.

Amount

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10mm dia as tie bar and similar works complete confirming to Fe-410 -O etc complete all as specified and directed.

S&F 30mm thick flush shutters, factory made, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast of size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F factory made steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc all complete all as specified and directed.

All as per item No 8 above but without glazing bars complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces, the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure treated of any number of panel complete all as specified and directed.

S&F 30mm thick 2nd class HW factory made glazed and skelton door shutters, open rebated without sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section and clause 8.20 (a) fitted to chowkats or frames of any number of panels complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F in repair 150mm extruded aluminium handles, fabricated type, anodised etc complete all as specified and directed.

S&F in repair 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 200mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 3mm thick sheet glass, ordinary quality, not exc 0.50 sqm in each pane and fixed with oil putty or with wooden beading in squares etc complete all as specified and directed.

All as per item No. 19 above but figured glass complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in bed block for insertion of hold fast including necessary form work etc complete all as specified and directed.

S&F 30mm thick factory made solid PVC panelled door shutter (Style) consiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail, both rail of bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F solid PVC frame of size 50 mm x 47 mm made out of 5 mm both side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc complete all as specified and directed.

S&F factory made solid PVC moulded door shutter/cupboard shutter 28 to 30mm thick (Stiles) with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with wood free EPS & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.

All as per item No 24 above but wire gauzed shutter i.e one panel will be wire gauze in lieu of PVC sheet panel and other panel PVC sheet & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with M.S square tube & fixing in opening complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles- 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodized aluminium windows and ventilator shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, locking arrangement etc complete all as specified and directed.

S&F fixing aluminium grill for windows in approved design/ pattern by Engineer-in-charge, fixed with aluminium beading complete all as specified and directed.

S&F 5.50mm thick sheet glass, tinted quality and glazing complete all as specified and directed.

S&F in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces including racking out jonts, hacking for key, scrubbing down with water including removing of debris from site etc complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc including removing of debris from site complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan to any redius, built in half brick thick wall in CM (1:4) (Using old size brick) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilator shutters complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm as in gauze door / window / ventilator shutters complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in reapir door closer hydraulically regulated, designation No 2, universal type, aluminium (Die cast body) suitable for door shutters complete all as specified and directed.

Dismantling framed work as in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp, insulation etc) or insulation boards/ blankets any thickness, including cover fillets/ GI snap grid/ POP ceiling etc complete all as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595x595x4mm fixed or laid /inserted to GI frame work with screws/ clips as in ceiling, laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.43mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.4mm thick with height 38mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasterners, including drilling holes for 4mm dia GI wire suspender and clips etc all as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

S&F in repair 4mm thick asbestos cement plain building boards fixed to timber frame work / steel frame work with screws including two coats of white wash complete all as specified and directed.

S&F in repairs 18/19mm prelaminated particle board, interior grade, prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs 18/19mm Prelaminated particle board, interior grade prelaminated one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for external teak wood lipping 18/19 x 6mm thick fixed with nails complete all as specified and directed.

S&F IInd class hard wood fillets, square or rectangular or tringular in section, wrought fixed to wall with nails area exc 6sq cm but not exc 13 sq cm complete all as specified and directed.

All as per item No 54 above but area exc 3 Sq cm but not exc 6 Sq cm complete all as specified and directed.

S&F in repair IInd class hard wood fillets, square or rectangular or tringular in section, wrought fixed to wire mesh door frame with nails, area not exc 3 sq cm complete all as specified and directed.

S&F continuous (piano) hinges of width 40mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100mm hasp & staple safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

M&L for preparation of new wooden surafces of any description not exc 10cm width or girth when unconnected with other painting or when painted in different tint & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for running welding in repairs including cleaning and preparing surfaces for welding, thickness of metal to be welded not exc 6mm such as MS butt hinges to MS frame, broken steel windows or ventilator, iron doors and similar work complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding, but not backing, removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile n exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over 15mm thick screed bed or bedding layer in CM (1:4) finished fair and even for laying floor finishes/ tiles etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300mmx450mm, Make as approved by GE) on vertical surface such as skirtings/ dados, set and jointed in neat cement slurry and pointed in coloured cement to match over and fixed over 10mm thick backing coat in CM (1:3) finished even and fair complete all as specified and directed.

Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet / welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar (1:3) properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM (1:6) including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350x450x7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM (1:4) including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.

S&F in repair Curtain Rod/ rails, Stainless steel, 20mm dia with fixing brackets, stops, etc complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.67,326.00]

Alert Multipurpose Services

DE PRETTY AND CO

Bidder Name

DE PRETTY AND CO

Alert Multipurpose Services

M/s T.S.JOHAR