SPECIAL REPAIRS TO OFFICER LIVING/IN ACCN AND CERTAIN MINOR WORKS AT AIR FORCE STATION SURATGARHSPECIAL REPAIRS TO OFFICER LIVING/IN ACCN AND CERTAIN MINOR WORKS AT AIR FORCE STATION SURATGARH

Amount

BOQ (SPECIAL REPAIRS TO OFFICER LIVING/IN ACCN AND CERTAIN MINOR WORKS AT AIR FORCE STATION SURATGARH )

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un- reinforced, complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc.but excluding ashlar facing, dressed stone work etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 3 here-in-before but except bricks.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc. 6m in mean radius, built in cement mortar 1 :4 in half brick wall, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

M&L for Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 for filling of hollow portion, complete all as specified and directed.

M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 for filling of hollow portion, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hardwood (Sal/ Hollock) glazed and skelton shutters open rebated and prepare to receive glass guage (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fitted to chowkhat, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified and directed.

S&F 30 mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge.

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified and directed.

S&F butt hinges, stainlees steel 100mm long (ISI marked), complete all as specified and directed

S&F Aluminum handles, 150 mm size plate type complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified and directed.

S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified and directed.

S& F in repair 150mm brass ordinary rat tail rod pattern springs including roller and rollar plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified and directed.

S&F Aluminum floor door stopper 63 mm with two rubber legged all as specified and directed

M&L for anti snake rubber beading 75 mm wide 4 mm thick for fixing with door shutter and similar situation including necessary drilling and cutting etc, complete all as specified and directed.

S&F peg set of six made of stainless steel complete all as specified and directed.

S&F Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F Aluminum powdered coated window and ventilator shutters, sliding type with four track (two track with and including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples, two track with and including 4.8 mm thick tined glass including necessary fitting and fixture) without sash bars, aluminum sections of size 40x20x1.5 mm fixed in aluminum anodised double frame of section size 63X35X2 mm including necessary jointing cleats, glazing clips, aluminum anodised sap beading, screws, aluminium beading, pvc packing, aluminum anodised fitting and fixture including powder coating of thickness n.exc 50 micron on all aluminium section, Aluminium chequered grills as on aluminium windows weight not less than 1.0 kg/sqm complete all as specified and directed.

Supply and fix factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,buttt hinges ,peg set of their,etc including two coat of synthetic paint over primer complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying one coat of Dr fixit solution to avoid seepage lekage and effect of effloracence, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement but using water proofing compound as per manufacturer's instructions, complete all as specified and directed. Note :Water proofing compound shall be measured & paid seprately.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finshed even over rendering with under coat 15mm thick cement and sand mortar 1:4, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of priming and over and including 3mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying 1 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for preparation of plastered or unplastered old decoraced surfaces on ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete, all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for Complete removal of existing treatment and applying multi colour rustic texture coating on walls including preparation of surfaces using wall care putty 1 mm thick complete all as per manufactures instruction complete all as specified and directed.

M&L for Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over new plastered surfaces , including preparation and using primer on new surfaces ,complete all as specified and directed.

M&L for Applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of Formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but n.exc 20cm wide rough finish surface of concrete

M&L for precast cement concrete M-15 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articles with plain faces, set in cement mortar 1:6, complete all as specified & directed.

M&L for Reinforced cement concrete, type A-1 (1:1.5:3) nomnal mix, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed.

All as per item No 54 above but on vertical surfaces such as dado, skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut polished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.

M&L for polished kota stone slab 18 -20 mm thick in riser of steps, skirting, dado and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:6, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L for Udaipur green marble (of any type) 14 to 16 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone, laid over and including 15mm thick screed in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing(table rubbed & polished) to achieve mirror finishand ,making hole in stone and RCC shelves suitable for gas pipe, with round edges where required, complete all as specified and directed.

M&L for Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates 75mm thick as in sub base or in mass concrete or in base layer, complete all as specified and directed by Engineer-in-Charge.

M&L for Parking floor coloured heavy duty vitrified tiles (Square/rectangular ) polished, area of each tiles exceeding 0.06 Sqm but n exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed.

S&F in repairs stainless steel 25 mm dia curtain rod including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed.

Supply and fix in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china flat back 550 x400 mm size with pedestal white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls all specified and as directed.

S&F in repairs, 15mm bore, WHB mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs stop valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

S&F in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified and directed.

S&F in repair Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repairs prettifying bathroom mirror (decorative) 600 mm x 450 mm fixed to wall with 4x atlantic fully brass half round mirror glass brackets steel studs holder 8 mm chrome finish complete all as specified and as directed.

S&F in repairs, sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F stainless steel Plate rack 1mm thick of overall size 750mmx600mmGrade -304 including shelves rod for putting plates etc, complete all as specified and directed.

S&F in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15 mm bore wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified and directed.

S&F in repairs soap dish, brass chromium plated, complete all as specified and directed.

S&F in repairs towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&Fin repairs sheet glass corner set of 5.5 mm thick glass of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed

S&F in repairs sheet glass 5.5 mm thick WHB Shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete all as specifed and directed.

M&L for PVC bath room cabinet of size 330 x 430 mm x 110 mm with mirror fixed in repairs complete all as specified and directed.

Dismantling water tank of capacity exc 250 and n exc 500 ltr of any type, PVC/RCC/MS complete all as specified and directed.

S&F Rotational moulded polyethylene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with closed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T ) with access door equal or unequal, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction double (double T ) equal or unequal, complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T ) with access doore qual or unequal, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction double (double T ) with access door equal or unequal, complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repairs brass chromium plated grating 75/100 mm dia complete all as specified and directed.

S&F in repairs brass chromium plated grating 125mm dia with hole , complete all as specified and directed.

Taking up or down GI tubing with all connections and fittings of 15mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

Taking up or down GI tubing with all connections and fittings of 20mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps & similar work etc. and cutting chases for cancelled water tubing and making good, cutting exc 10cm but not exc. 20cm girth in brick walls,complete all as specified and directed.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

Taking down existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding tiles mud phuska or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish outside the premises, complete all as specified and directed.

M&L for PCC type B-1(1:2:4), using 20mm graded crushed stone aggregate as in PCC padding on depression of roof finished even and fair without using extra cement, complete all as specified and directed.

M&L for Water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2 kg sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no groove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compound as per manufacturer instruction surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on above treated surface and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed.

M&L for PCC type B-0 1:2:4 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified & directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, tubes,flat sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M&L for pre painted galvalume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring complete all as specified and directed.

M&L for appliying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed.

M&L for 15mm thick cement screed in CM 1:3 admixed with integred waterproofing compound FOSROC's complast X 421 IC @ 130ml per bag FOSROC's Nito bond AR cement slurry/STP No 1 liquid @ 200ml per bag of complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified and directed.

S&F in repairs 32mm dia High density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 laid in trenches, complete all as specified and directed.

Supply only integral water proofing compound (ISI marked), complete all as specified and directed.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store(Accessories or components to be provided free for replacment by department), complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

Taking down unserviceable DB's box including MCB's of any size/rating, complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed GI modular boxes in wall of required size and colour for modular switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note :- GI modular boxes shall be measured and paid under respective item & Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.

All as per Srl item No. 126 here-in-before but for one ceiling fan/exhaust fan and wall mounted fan point controlled by one SP switch, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one light point controlled by Two, two way switch, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one bell point controlled by one bell push, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 126 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 126 here-in-before but for AC/Geyser Point for sheet metal enclosure with 4 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 4 Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed.

S & F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.

S & F bell push switch, single pole, one way flush type, 5 Amps, 240 volts all as specified and as directed.

S & F Socket outlet, flush type 2 in 1, 3 pin, 5 amps, 240 volts all as specified and as directed .

S & F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts all as specified and as directed.

S & F switch piano flush button single pole one way 15 amp 240 volts, all as specified and as directed.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

S&F of bell multi music type, 230 volt AC, single pole, complete, all as specified and as directed.

S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge.

S&F of LED bulb 09 watt, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard as it is in working condition for further hanging in its original position or any other position including as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr- in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

Taking down exhaust fans of any sweep and any size including cable connections and removing the exhaust fan with blades deposit to store yard as it is in working condition for further fixing in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service i.e. cleaning, greasing and oiling, painting of exhaust fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr-in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S & F stepped type electronic fan regulator 120 W 230 volts ,50 Hz flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

M&L for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed. Note- (a) The three runs of single core 6.00 sqmm cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

M&L for submain wiring with two single core 10.00 sq mm PVC insulated FRLS multistranded copper conductor cable drawn through including chasing cutting in any type of masonary fixed in wall into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 10.00 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and directed.

Supply and Fixing Sheet metal Vertical TPN double door DB 6 Way, 415 Volt, TPN with 200 Amps rated bus bar complete with MCCB TPN 125 Amps, 16 KA, DPX 160 series as incoming and MCB's SP 40 Amps, 10 KA - 10 Nos as out Going and fixed in repair complete all as specefied and directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing MCB SP amp rating 240V, 10KA 5-32 Amps 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN amp rating 240V, 10KA 32 Amps 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN amp rating 240V, 10KA 40-63 Amps 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCBDB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing highly efficient multi LED flood light 120 watt 230 V AC outdoor type with pressure die cast aluminium housing ,reflector and enclosed with toughned glass IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fix GI tubing 40 mm bore medium grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed.

M&L for cutting openning through brick wall 230mm thick built in cement mortar suitable for exhaust fan 300mm seep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all specified and directed.

Supply and fix meter box to accommodate single phase meter made of plastic with clear screen at front to show meter reading, complete all specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

SHILPI CONSTRUCTION COMPANY

M/S VISHNU ENTERPRISES