R/R damages to Totu Majthai in Tehsil Distt Shimla HP

Amount

Items

Distempring (two coat ) with oil bound washable distemper of approved brand and manufacture and of required sdahe on undecorated wall surface to give an even dshgade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing free from mortar dropping and forign matter and also including preparing the surface even and sand arpered smooth.

Extra over item No 17170000 & 17172000 for distempring with oil bound washable distemper of approved brand & manufacture.

Providing wood work in frames of doors, windows, clearstory, windows and other frames wrought, framed and fixed in position: 2nd class deodar wood

Providing & fixing partical board lining with butt jointing & nails 19 mm thick.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing with white wood primer pink.

Painting two coats ( Excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning oil, grease, dirt, dust and other foreign matter sand papering and stopping: with white enamel paint.

Painting one coats ( Excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning oil, grease, dirt, dust and other foreign matter sand papering and stopping:- with white enamel paint

Extra over item No 16043000 & 16044000 for every subsequent coat of paint.

White Glazed tiles 6 mm thick in skirting , riser of steps and dado 12 mm thick cement slurry

Steel work weidedin built up section, trusses and framed work i/c cutting,hoisting,fittingin position complete in grating ,framed guards & ladders etc.

Providing & Fixing of laminated sheet Roofing with J or L hooks bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete. 0.63 mm thick sheet

Providing & Fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coated of 20 microns over 5 microns primer coating + back coat of polyster of with pre printed iron j or l hooks bolts & nuts 6 mm dia preorinted GI Limpt & bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing & Fixing MSBP sheet 1.66 mm to 2.00 mm thick in eaves board / facia/ soffits/ ceiling i/c cutting , fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-charge. ( Base member of steel work shall be measured & paid separately )

Providing & Fixing 15 cm vide 45cm over semicircular plain GI Sheet gutter with iron bracket 40x3 mm size bolt & nuts washers etc i/c making connections with rain water pipe complete as per design. 0.63 mm thick sheet.

20 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor to level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in c:m 1:3 (1 cement : 3 sand).

Excavation in earth work & disposal of all excavated earth up to a lead of 20 mtrs & lift up to 1.50 mtrs , disposal earth to be levelled & neatly dressed.

Providing and laying cement concrete 1:2:4(1cement:2 sand:4 graded stone agg.20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete workin:- Foundation & plinth

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering ,strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu reinforced concrete and plain concrete workin:-

Vertical surfaces such as walls(any thickness)partitons and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2 X 1.5 Sq mm

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required

Providing & fixing of LED 20 watt including all leads and lifts complete in all respect(Surya,Bajaj,Havells Company)

Parmod Kumar Thakur (BID ID -502437)

Himesh Sharma (BID ID -502271)

Ashok Kumar Thakur (BID ID -502636)