REPAIR TO BEDS CHARPOYS SOFA SET WOODEN CHAIRS OF VARIOUS TYPES AND OTHER WOODEN FURNITURE FD SERIES RECANNING POLISHING UNDER BSO OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

BED PLY TOP (1980mmx900mmx660mm)(FD-246 or similar) S&F 12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel including removal of damaged ply wood all as specified on drawing and as directed.

S&F in repairs to 1st quality teak wood long rail 35mm x 90mm in section as per existing size of Bed including removal of damaged long rail all as specified on drawing or as directed. (Each long rail will be measured as single unit)

All as per item No. 1.01, but short rail all as specified on drawing or as directed. (Each short rail will be measured as single unit)

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed.

S&F in reapirs to 4mm thick one side teak finished plywood of size 780 x 340mm including 12mm dia half cut teak wood beading of both side of head board including removal of damaged ply all as specified on drawing or as directed.

S&F in reapirs to 4mm thick one side teak finished plywood of size 780 x 180mm including 12mm dia half cut teak wood beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed.

S&F in repairs to flat iron of mild steel of size 35mm x 5mm, bents to right angle on each corners of Bed Hard all as specified on drawing or as directed.

CHAIR VERANDAH/CHAIR VERANDAH PVC (FD-256,FD-333, FD-359) Repair/replacement of broken Leg, each one piece made of MS conduit pipe 16G, 19/20mm dia including welding all as per drg and as directed.

Welding joints of broken leg of 19/20mm MS tube & other joints as per drg

S&F Hard PVC/Nylon shoes as per drg

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approved make including removing old unserviceable cane/plastic newar from seat & back and recaning the seat & back of complete chair including handles etc with approved 4mm white plastic cane as per Matt Pattern all specified on drawing or as directed.

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approved make including removing old unserviceable PVC seat and fixing new PVC seat 4mm thick with wt. not less than 1.85 kg. of approved make complete all specified on drawing or as directed.

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approved make including removing old unserviceable PVC back and fixing new PVC back 4mm thick with wt. not less than 1.85 kg. of approved make complete all specified on drawing or as directed.

CHARPOY G I PIPE NYLON NEWAR (FD-220 or SIMILAR) Removing of unserviceable nylon newar from charpoy GI pipe, tightening of all loose components (i.e. complete charpoy), S&F ply wood of size 1980x900x12mm thick BWR Grade ISI marked of approved make. Plywood should be fixed with suitable numbers of mild steel galvanised iron nuts & bolts alongh with washer, 02 No. MS flat iron of size 40x6mm shall be fixed over long rails with nut and bolt complete duly painted with two coats of synthatic enamel paint over a coat of red oxide primer all as specified and directed.

Taking out old damaged & worn out following parts of charpoy GI pipe and replace the same with new part without damaging other parts all as per drg or as directed :-

LONG RAIL: Made of 32mm dia GI pipe medium grade ISI marked of approved make including both side threading complete all as specified and directed.

SHORT RAIL: Cutting the unserviceable portion from existing unserviceable long rail obtained from Sl item 3.03 here-in-before and converting into short rail including threading both side and fixing the same in the existing charpoy frame complete all as directed.

LEGS: Cutting the unserviceable portion from existing unserviceable short rail obtained from Sl item 3.04 here-in-before and converting into legs including threading one side for screwing and other side/bottom of leg should be covered with 4mm thick round MS plate complete all as directed.

Supply and fixed in repairs GI Elbow 32 mm dia three way medium grade of approved make suitable for fixing the long rail/short rail/legs rest all as shown on drg and all as directed.

CHAIR DINING/CHAIR DINING PVC SEAT (440MMx430MMx890MM) (FD-228/FD-279/FD/MAP-II/05 OR SIMILAR) Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 30x55x890 mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 30x55x460mm complete all as specified on drawing or as directed.

Removing the existing unserviceable back rest and proving new Teak wood back rest of size 45x15 slightly curved out of size 45x35mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 30x65mm drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable rear rail of size and proving new Teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable side rails and providing new Teak wood side rails of size 30x65 mm including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed.

Removing of old unserviceable/broken PVC seat from chair dining and S&F new PVC seat 4mm thick in single piece all as per shape and size shown on drawing and as directed.

Recaning of repaired chair dining with best quality of approved plastic cane 2mm wide, 0.4mm thick and border with 3x0.60 mm cane of white or cream ivory all as specified on drawing or as directed.

CHAIR DINING OFFICERS (FD/E6/MAP/10(R) or similar in MAP) Removing the existing unserviceable rear leg from chair dining officers and providing with new Teak wood rear leg of size 25x50x1200 mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front leg from chair dining officers and providing with new Teak wood front leg of size 25x50x450mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 25x50x450mm complete all as specified on drawing or as directed.

Removing the existing unserviceable rear rail of size and proving new Teak wood rear rail of size 25x50x450mm complete all as specified on drawing or as directed.

Removing of old unserviceable/damaged existing cushioned Seat from chair providing new seat made of 75mm thick 40 density foam cushion over 12mm thick commercial plywood BWR grade duly covered with best quality tapestry complete all as specified on drawing or as directed. (Sample of tapestry shall be approved by GE before fixing).

CHAIR WRITING (535MMx470MMx890MM) (FD-202/FD-250/FD-280 ) Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 55x30x890mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 55x30x660mm complete all as specified on drawing or as directed.

Removing the existing unserviceable back rest and providing new Teak wood back rest of size 50 x 15mm slightly curved made out of 50x35mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 30x65mm including drilling holes at @ 12.5 mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable rear rail and providing new Teak wood rear rail of size 30x65mm including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable side rails and providing new Teak wood side rails of size 30x65mm including drilling holes @ 12.5mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable broken arm rest of size 60x25 mm and providing new Teak wood arm rest complete all as specified on drawing or as directed.

Recaning of repaired chair writing with best quality of approved plastic cane 2mm wide, 0.4mm thick and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing or as directed.

CHAIR EASY (FD-229 or Similar) Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 55x25 mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 50x25mm complete all as specified on drawing or as directed.

Removing the existing unserviceable broken arm rest and providing new Teak wood arm rest of size 65x25x610mm complete all as specified on drawing or as directed.

Removing the existing unserviceable front frame and providing new Teak wood front frame of size 55x25 mm including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 50x25 mm complete all as specified on drawing or as directed.

Removing the existing unserviceable rear rails and providing new Teak wood rear rails of size 50x25mm complete all as specified on drawing or as directed.

Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 2mm wide, 0.4mm thick cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed.

CHAIR WOODEN BOTTOM WITHOUT ARMS (FD-225, FD-285) Removing of existing unserviceable seat and provide new seat made out of 6mm thick plywood commercial BWR grade to Chair wooden bottom with wood/steel screws, rest all as specified on drawing or as directed.

Removing the existing unserviceable rear leg and providing with new Teak wood rear leg complete all as specified on drawing or as directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg complete all as specified on drawing or as directed.

Removing the existing unserviceable side rail and providing with new Teak wood side rail complete all as specified on drawing or as directed.

Removing the existing unserviceable front rail and providing with new Teak wood front rail complete all as specified on drawing or as directed.

Removing the existing unserviceable rear rail and providing with new Teak wood rear rail complete all as specified on drawing or as directed.

Replacement of unservicable back rest.

COMMON FOR ALL CHAIRS (FD-228/ 279/280/225/285 or similar) Removing the existing unserviceable stiffeners and providing new Teak wood 2nd class hard wood stiffeners of size 25x20 mm complete all as specified on drawing or as directed.

PEG TABLE (450MMx300MMx380MM) (FD-236/FD-277/FD-384) M&L for removing the existing unserviceable leg and providing with new Teak wood leg complete all as specified on drawing or as directed.

M&L for removing the existing unserviceable top rail (Shorter side) and providing with new Teak wood top rail complete all as specified on drawing or as directed.

M&L for removing the existing unserviceable bottom rail (longer side) and providing with new Teak wood bottom rail complete all as specified on drawing or as directed.

All as per Sl item No 10.01 here-in-before but stiffener of Peg table.

Removing of old unserviceable top from peg table and S&F new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281/FD-373) Removing the existing unserviceable cushion of sofa set, tapastry cloth and replacing with new foam cushion 40 density 100mm thick of size 558mm x 533mm x 100mm duly covered with new tapastry cloth including mulmul completly stiched, rest all as shown on drg and as directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 390/- per metre and as approved by GE.

Removing the existing unserviceable tapastry cloth of sofa set and replacing with new tapastry cloth mat finish of size 558mm x 533mm x 100mm with mulmul cloth. Note : tapastry cloth costing not less than Rs. 390/- per metre and as approved by GE.

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 495mm, rest all as shown on drg and as directed.

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood leg size 70mm x 35 mm x 495mm, rest all as shown on drg and as directed.

Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed.

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 585mm, rest all as shown on drg and as directed.

Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed.

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed.

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed.

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed.

TABLE DRESSING GENTS/MIRROR DRESSING GENTS (FD-230/FD-379 or similar in MAP) Replacement of existing unserviceable drawer for Table dressing gents made out of well seasoned teak wood second class all as specified on drawing or as directed. (Note-Each drawer should be measured as single unit)

Supply & fixed in repairs new mirror 5mm thick of approved make with full frame all as specified on drawing or as directed.

TABLE DRESSING LADIES (FD-251 or similar) Replacement of existing unserviceable drawer for Table dressing ladies made out of well seasoned teak wood second class all as specified on drawing or as directed. (Note-Each drawer should be measured as single unit)

Supply & fixed in repairs new Glass shutters of Table dressing ladies all as specified on drawing or as directed. (Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & Fixed in repairs Aluminium Channel all as specified on drawing or as directed.

Supply & fixed in repairs new back support made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed.

Supply & fixed in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed.

Table Bed Side (FD-210/248/FD-276) Removing of existing unserviceable sides of Table Bed Side and providing new sides of 18mm thick teak wood 2nd class hard wood, rest all as specified on drawing or as directed. (Each sides will be measure as single unit)

Removing of existing unserviceable Top and bottom of Table Bed Side and providing new Top of teak wood 2nd class hard wood, rest all as shown on drg and as directed. (Each Top & Bottom will be measure as single unit)

Removing of existing unserviceable Back of Table Bed Side and providing new Back of 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drg and as directed.

Removing of existing unserviceable shelf of Table Bed Side and providing new shelf of 12mm thick teak wood 2nd class hard wood, rest all as shown on drg and as directed.

Removing of existing unserviceable/broken PVC Shoes, M & L for fixing of PVC shoes superior quality of 20mm dia with suitable screw at the bottom of the leg in the following furniture items as specified & directed :- Chair Dining, Chair Writing, Chair easy, Chair Wooden bottom without arms,Table Bed Side,Table centre,Teapoy, Table Peg & Table 3'x2' with/without drawer

Supply & fixing of Knob of aluminium anodized dark brown in shade as approved by GE & in the following furniture items with screws as specified & as directed :- Table Dressing Gents/Ladies, Side Board, Table 3'x2' with drawer, Table Writing

SIDE BOARD (1220mm x 455mm x 760mm) (FD-241 or similar) Removing the existing unserviceable top of side board and providing new top made out of teak wood 2nd class hard wood of size 1220 x 455 mm all as specified on drawing or as directed.

Removing the existing unserviceable sides of side board and providing new sides made out of teak wood 2nd class hard wood of size 650x450mm all as specified on drawing or as directed. (Note : Each side will be measured as single unit)

Removing he existing unserviceable back of Side Board and providing new Back with 6mm thick plywood commercial type of Size 650 x 1220 mm all as specified on drawing or as directed.

Removing the existing unserviceable bottom plywood of drawer with new bottom made of 6 mm thick BWR grade plywood all as specified on drawing or as directed.

Removing the existing unserviceable shutter and providing new shutter made out of teak wood 2nd class hard wood of size 400x600 mm including Hinges and lock all as specified on drawing or as directed. (Note : Each shutter will be measured as single unit)

Removing the existing unserviceable bottom of side board and providing new bottom of size 1220 x 455 mm made out of teak wood 2nd class hard wood all as specified on drawing or as directed.

Removing the existing unserviceable stiffner (long) of side board and providing Teak wood 2nd class hard wood leg frame all as specified on drawing or as directed.

Removing the existing unserviceable stiffner (short) of side board and providing Teak wood 2nd class hard wood leg frame all as specified on drawing or as directed.

Removing the existing unserviceable broken legs of side board and providing new Teak wood leg 2nd class hard wood of size 45 x 45 x 125 mm but at bottom 25 x 25 mm all as specified on drawing or as directed. (Note : Each leg will be measured as single unit.)

Replacement of unserviceable hinges 75mm long piano type.

Supply & fixed in repairs magnetic catcher iron body chromium plated all as specified on drawing or as directed. (Note :- All parts as mentioned above includes 3mm thick Teak wood edging should be polish wherever applied necessary as per drawing).

TEAPOY WOODEN (FD-278/FD-382 or similar) Replacement of existing unserviceable top for Teapoy made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged legs from teapoy made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

TABLE DINING 8/6/4 PERSONS (FD-239/FD-273 or similar) S&F in repairs to unserviceable damaged legs from Table dining 8/6/4 persons made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged side short rails from Table dining 8/6/4 persons made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

Replacement of existing unserviceable table top for Table dining 8 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

Replacement of existing unserviceable table top for Table dining 6 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of hard wood (Teak) , rest all as shown on drg and as directed.

Replacement of existing unserviceable table top for Table dining 4 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 4 persons made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

Common for Table dining 8/6/4 persons S&F in repairs Triangular wooden bracket 100X100X20mm thick hard wood (Teak) for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed.

TABLE WRITING (FD-249/FD-275 or similar) Replacement of existing unserviceable table top for Table writing made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs replacement of unserviceable damaged legs from Table writing with new leg made out of hard wood (Teak) rest all as shown on drg and as directed.

S&F in repairs replacement of unserviceable damaged foot rest from Table writing with new foot made out of hard wood (Teak) rest all as shown on drg and as directed.

S&F in repairs replacement of unserviceable damaged stiffner (longer) from Table writing with new stiffner made out of hard wood (Teak) rest all as shown on drg and as directed.

Replacement of damaged back ply in repair as per drg

18mm thick prelaminated particle board Cabinet door along with locking arrangement and handles as per drg

TABLE CENTRE/TABLE CENTRE 2 TIER (FD-235/FD-274) Replacement of existing unserviceable table top for Table centre made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged legs from Table centre made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged top rail (long side) from table centre made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged bottom rail (short side) from table centre made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

TABLE WITH DRAWER 900x 600 x 760mm (FD-224/FD-283) Removing of existing unserviceable table top for Table with drawer 900 x 600 x 760mm and providing new table top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged legs from Table with drawer 900x600x760mm made out of hard wood (Teak) size 60x30x740mm rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged long rails from Table with drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged bottom stiffners (short side) from Table with drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged drawers from Table with drawer 900x600x760mm made out of hard wood (Teak) including providing 6mm thk commercial ply to bottom of drawer complete, rest all as shown on drg and as directed.

TABLE WITHOUT DRAWER 900x 600 x 760mm (FD-223/FD-231/FD-284) Removing of existing unserviceable table top for Table without drawer 900 x 600 x 760mm/table one piece and providing new table top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make all as shown on drawing and as directed.

S&F in repairs to unserviceable damaged legs from Table without drawer 900x600x760mm made out of hard wood (Teak) size 60x30x740mm including applying two coats of French polish including preparation of surfaces complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged front long rails from Table without drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

S&F in repairs to unserviceable damaged bottom stiffners (short side) from Table without drawer 900x600x760mm made out of hard wood (Teak) complete, rest all as shown on drg and as directed.

Hat Stand with mirror (FD-233) S&F in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with complete frame back all as specified on drawing or as directed.

Removing of existing unserviceable Back of Hat stand with mirror and providing new Back of 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drg and as directed.

S&F of brass pegs with brass screw in place of broken/ lost pegs in hat stand with mirror, rest all as shown on drg and as directed.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat of mension wax polish till the smooth finishing complete all as specified on drawing or as directed for the following furniture articles:-

Bed plywood top(FD-246 or Similar)

Chair dining/Chair dining PVC Seat (FD-228/279 or Similar)

Chair dining Cushioned (FD/E6/MAP/10 (R) or similar in MAP)

Chair Easy (FD-229 or Similar)

Chair Writing (FD-280 or Similar)

Chair wooden bottom (FD-225/285 or Similar)

Hat Stand with mirror (FD-233)

Sofa Set 3 Pcs 5 Seater (FD-281/373)

Sofa Set 4 Seater (FD-281/373)

Stool dressing CB/Stool Dresing Cushioned (FD-282 or Similar)

Side board (FD-241,FD-1112)

Table dressing Gents with Mirror/Mirror Dressing Gents (FD-230 or Similar in MAP)

Table dressing Ladies with Mirror/Table Dressing Ladies with Stool (FD-251)

Table bed side (FD-276 or Similar)

Peg Table (FD-277/FD-384 or Similar)

Table with drawer 900 x 600 x 760mm (FD- 283 or Similar)

Table without drawer 900 x 600 x 760mm (FD- 284 or Similar)

Table dining 8/6/4 persons (FD-273 or Similar in MAP)

Teapoy wooden (FD-278/382 or Similar)

Table writing (FD-275 or Similar)

Table centre/Table centre 2 tier (FD-274 / 235 or Similar)

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 36,762.50.00 (refer Tender Srl Page No 41 to 45). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S JAI BALAJI TRADERS

S K ENTERPRISE

M/S Banerjee construction co

M/S GENERAL TRADERS

M/S BENGAL ENGINEERING ENTERPRISES

RABI BANIK

NEO BUILDERS

M/S K M CONSTRUCTION

SHRI S K BHATTACHARJEE