Line Work Business Plan

Amount

Carriage of 8.5 Mtr Long PCC Pole from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)

Carriage of 9/11 Mtr Long ST Pole from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)

Carriage of Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel and other required material from Store Center at 132 KV substation Mathura to the site of work including loading and unloading of material at both ends.

Erection of single pole structure 8.5 Mtrs Long PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Single pole structure 09 Mtrs Long ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Single pole structure 11 Mtrs Long ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Double pole structure 09 Mtrs Long ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Construction of Section pole/“T” pole for L.T./H.T. line on the erected pole as per RESPO manual and as per direction of supervising engineer. It including the cost of all labour, T&P, etc. required for proper completion of work.

Installation of stay set with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works.

Earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour T&P and required material for such work.

Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of ACSR Dog Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Grouting of PCC/ST pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material.

Guarding of 33 KV line by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 mtrs. as per direction of supervising engineer/RESPO manual. It includes the cost o f labour T&P carriage etc required for proper completion.

Straightning of Double Pole of structure 11 KV/LT Line at different place in line by opening of line conductor, jumpers, disc fittings, cross angles, Transformer etc. clearing the ground in root of pole, applying suitable supports of wire/rope etc in desired direction, stays etc. then digging the earth pit around the supports, then its staraighting as per direction of supervising engineer.

Chopping of Tree branches to Clear the route properly.

Cutting of CC Road for making depth foundation for erection of pole.

Re-sagging of loose 11 KV./L.T. line as per direction of supervising engineer. It includes the cost of labour, T&P etc required for proper completion of work.

Re-nuzzling of old stay set by opening old binding for better straightening of pole and re-sag the existing conductor of H.T/L.T line properly as per direction of supervising engineer.

Dismantle of old/damaged ACSR weasel conductor from the existing line and its bundling and stacking in roll and send to J.E. Store/ Mathura Store.

M/s Sanjay Traders

GIRDHAR LAL AND SONS