Construction work Interlocking tiles and drain from house no. D-82 to house no. D-101 in Mahindra Enclave Ghaziabad.

Earth work in cutting or in embankment in oridinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth including remming and dressing the surface to required levels and slops and also including 1.50 M. lift and 10 km Lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M. as directed by Engineer in charge excluding royality as per UP.P.W.D.SOR-2022 S.I.No-253(a).+231(a).

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per Clause 401. As per MORD Analysis.

M-150 Brick work with 1:4 cement &coarse sand mortor in foundation and plingth including supply of all material, labour t&p etc . required for proper completion of work . as per UP.P.W.D.SOR-2022 S.I. No-305 (a).

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per UP.P.W.D.SOR-2022 S.I.No. 584.New item.

P/Laying of cement concrete with 20 mm gauge stone ballast, coarse sand & cement in the proportion of 1:1.5:3 including supply of all materials, labour. Tools& plants etc. required for proper completion of work. As per UP.P.W.D.SOR-2022 S.I.No. 279(b).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel 80-100 KN Static Roller in stages to proper grade and camber, applying and brooming,requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404.

Supply & laying of 80 mm thick ISI Marked I Shaped (grey base) machinacaly compressed Interlocking Cement concrete pavers blocks, smooth high laoss finish,skid resistant, manufactured from rubber moulds through vibrocompression mechanism, high pressure and control vibration machine having plan diamention 200x(160+120)mm with minimum 5mm thick toping. The compresive strength of Concrete paver blocks shall not be less than 30 MPa & weight 4.5 Kg per No confirming to IS:15658-2006 as per PWD SOR Bulandshahr Ch-2 SI No 5a .including cost of material and blanket layer of 3.00cm thick local sand labour, T&P etc. required for proper competion of work as direceted by Engineer-in-charge as per MORD technical specification. 1500.

Supply & laying of 80 mm thick ISI Marked I Shaped (coloured base tiles) machinacaly compressed Interlocking Cement concrete pavers blocks, smooth high laoss finish,skid resistant, manufactured from rubber moulds through vibrocompression mechanism, high pressure and control vibration machine having plan diamention 200x(160+120)mm with minimum 5mm thick toping. The compresive strength of Concrete paver blocks shall not be less than 30 MPa & weight 4.5 Kg per No confirming to IS:15658-2006 as per PWD SOR Bulandshahr Ch-2 SI No 5a .including cost of material and blanket layer of 3.00cm thick local sand labour, T&P etc. required for proper competion of work as direceted by Engineer-in-charge as per MORD technical specification. 1500.

Providing and laying in position machine battched and machine mixed design mix M- 20 (1:1.5:3) grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge .cement content considered in the item is 330Kg/cum as per MORD Analysis, clause 800,1205.4 & 1205.50.

M.S. ( Tor steel or plain) in plain work such as R.C.C. Work Iincluding cutting bending to proper shape complete including supply of all materials, labour T&P etc. required for proper completion of work As per UP.P.W.D.SOR-2022 S.I.No.504.