WELCOME MAINT OF OFFRS MD ACCN AND REPAIR TO PLASTER, JOINERY FLOORING, TILING, PLUMPING, SANITARY FITTING AT MUDFORT AREA UNDER AGE B/R (SOUTH) NO.II OF GE (SOUTH) SECUNDERABAD

Amount

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

All as per item No. 1 above but on ceiling surfaces

All as per item No 1 above but one coat of colour wash on walls.

All as per item No 1 above but one coat of oil bound distemper on walls

All as per item No 1 above but one coat of oil bound distemper on ceilings surfaces

M&L Preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item No. 06 above but on steel surfaces.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

M&L Complete removal of existing treatment on walls and applying two coats of OBD over a coat of Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper complete all as specified and as directed

M&L for writing Bldg no (30 Cms dia background black paint and 15 cm height letter in White Paint) complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster from brick or concrete surface of walls/ ceiling etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for 15mm thick in cement mortar 1:6 over brick work including finishing fair and even and smooth without using extra cemen in patch work up to height 7.50 mtr incl necessary form work complete all as specified and as directed.

M&L for rendering 5 mm thick on brick work or concrete surface in CM 1:4 over 10 mm thick in CM 1:6 and finished the surface smooth and even without using extra cement. complete all as specified and as directed.

M&L for rendering 10mm thick on ceiling surfaces in CM 1:4. finished the surface smooth and even without using extra cement complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of OBD over one coat of primer of any tint complete all as specified and as directed.

M&L preparation of new plastered ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as directed and as specified

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and as directed.

All as per item No 18 above but area exc. 1.5 Sq.m but not exc. 4 Sq.m each complete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each complete all as specified and as directed.

All as per item No 20 above but exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply the size of rail and stile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S & F stainless steel butt hinges 100mm long complete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.

S & F Aluminium handle 150mm size fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F 300 mm long helical door springs including roller plate complete all as specified and as directed.

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

All as per item No 35 butwithout glazing bars

S & F, steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified and as directed.

All as per item No.38 above but fixed in repairs complete all as specified and as directed.

M&L Hacking out old broken glass (any thickness, size quality or description) from wooden frames or steel frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square panels or with wooden bead not exceeding 0.5sqm each pane complete all as specified.

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc complete all as specified and as directed. by Engineer-in- charge.

S&F in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc incl complete all as specified and as directed.

S&F 2nd class hard wood in fillets,squre, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm fixed in repairs complete all as specified and as directed.

S&F powder coated aluminium curtain rod 20 mm dia incl bracket and knob complete all as specified and as directed.

M & L for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and as directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip complete all as sepcified and as directed by Engr-In-Charge.

S&F of 4 mm thick Non asbestos fibre cement building boards fixed to Aluminium framework in ceiling with screws complete all as specified and as directed by Engr-In-Charge.

Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 30cmx30cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and as directed.

M&L cement concrete 40mm thick type B- 1, 1:2:4 (20mm graded stone aggregate)) as in floor finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed.

M&L forming construction joints Glass dividing strips, 3 mm thick 38 mm width inserted in position complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in level course on floor etc complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4.mm complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed.

Material & labour for glazed ceramic tiles coloured of size 300 x 200 x 6 to 7mm thick, as on vertical surfaces such as skirting, dados etc including 10mm thick CM 1:4 rendering and set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed .

M&L Granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including its dismantling complete all as specified and as directed.

S&F in repair WHB vitreous china incl pedestal (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP piller taps complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' trap, incl . 10 litres, PVC flushing cistern, Low level, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, white closed pattern with flat bottom, & cover & M S CP or aluminium hinging device, complete all as specified and as directed.

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm tick plaster in CM 1:4 with 3% WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in filling of sunken portion etc complete all as specified and as directed. .

S&F in repairs wash down water closet Vitreous chaina squatting pan " Orisa Patten" size 580 x 440 mm with integral foot rest and flush pipe of low density PVC 32mm dia for low level flushing cistern incl 10 ltr capacity Low level flushing cistern complete all as specified and as directed.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed

S&F in repair 15 mm dia pillar tap, cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S & F in repair 15mm dia stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair bib tap 15 mm dia , fancy type, chromium plated, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixed in repair CP 15mm dia health faucet with CP flexible 1.5 mtr tube complete in all respect as specified and as directed by Engr-in-Charge.

S & F in repair CP long body two Way Bib Cock 15mm dia with Wall Flange complete in all respect as specified and as directed by Engr-in-Charge.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.complete all as specified and as directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm complete all as specified and as directed. by Engr-in-charge.

S&F stainless steel Kitchen plate rack of 28 gauge of size 34"x35"x9" complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Demolition of existing tank of any description and S & F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed.

S & F 15mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections,complete all as specified and as directed.

All as per item No. 82 above but 20mm bore.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and as directed.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) complete all as specified and as directed.

NISHANTH INFRA DEVELOPERS PRIVATE LIMITED

VACON INFRASTRUCTURES