Design Inspection Transportation Supply Erection Testing and Commissioning of 66KV LILO line on 132KV D C tower with Panther conductor stringing for 66 to 11KV Sub-station at Lehdo Leh

Amount

Fabrication/Galvanizing & supply of Double Circuit D-type Tower and Tower part Tower Extension complete exluding bolts and nuts and stub but including hangers, D-shackles, washers etc

Double Circuit D-type tower ( 30-60 degree) & Dead End (DE) standard

9 meter Extension for Double Circuit D-type tower (30-60 degree) & Dead End (DE)

Fabrication/Galvanizing & supply of Stubs and Cleats for Double Circuit D-type Tower

For Double circuit D-Type tower ( DD/DE)

Supply of Galvanised Nuts & bolts including steps bolts and spring washer for tower and Stubs

Supply of Couterpoise Earthing type earthing including coke//charcoal, etc. excavation, backfilling in all types of soil including wires etc..

Supply and fixing of Tower accessories

Danger Plate

Number Plate

Phase plate (set of three)

Circuit plate (set of two)

Anticlimbing Device

Copper bond 500 mm

Supply of earthing of towers

Counterpoise type

Supply of line Material & accessories

ACSR panther conductor including sag & jumpering

Supply of GS earth wire 7/3.15 SWG

Mid span compression joint ACSR panther conductor

Vibration Damper for ACSR panther conductor

Repair sleeves for ACSR panther conductor

132KV-120KN single Tension Silicon Rubber, Fibre Glass rod (FRP ROD) ECR grade, end fitting (Polymer Insulator)

Mid span compression joint for GS earth wire 7/3.15 SWG

Vibration Damper for GS earth wire 7/3.15 SWG

Tension clamp fitting for GS earth wire 7/3.15

Erection Part

Excavation of foundaton pit including all earth work back filling and levelling etc for normal dry soil

Setting of stubs including all foundation work but excluding the cost of concreting and excavation for DD/DE tower ( 2 no. tower)

Concreting for foundation including all material, shoring, and shuttering if any forming concreting and curing of water including cost of cement for 1:1.5:3 & 1:3:6 mix but exluding cost of MS steel bar reinforcement

Erection of DD/DE type tower including all nuts & bolt including Punching of bolts

Laying, Stringing, Tensiong, Clamping, Jointing etc complete with ACSR panther conductor including hoisting of insulators , fixing of vibration dampers, jumpers, jumpers at tower complete line length (Double circuit) along with all accessories

Laying, Stringing, Tensioning, Clamping, Jointing etc complete with single earth wire 7/3.15 SWG including fixing of clamps and all accessories

Tag weilding of bolts and nuts on 1st section of tower

Repair sleeves for ACSR panther conductor

Supply and placement of MS Steel bar for reinforement for RCC work including fabrication, strainghtning, cutting, bending, placing and positioning and binding etc.

Grounding work for counter poise type earthing including excavation 0.6 mtr & back filling

Fixing of tower accessories

Danger Plate

Number plate

Phase plate (set of three)

Circuit plate (set of two)

Anticlimbing Device

Mir Electrical Store

HIMALAYAN RENEWABLE ENERGY AND CONSTRUCTION FIRM (HRECF)