Repair/Replacement of centrifugal pump sets, electric motor, LT panels, CI/DI/MS pipe lines of various sizes sluice valves, NRV, ARV and allied system installed at jib area under GE (Utilities) Udhampur.

Amount

Decoupling, disconnecting suction line and discharge line, taking down from foundation bolts, dismounting from base channels strip, opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unseviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75 HP complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall deemed to be included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A (BOQ).

All as per ser item No 01 but of capacity 30/40/50HP.

All as per ser item No 01 but of capacity 25/20/15/12/10HP.

All as per ser item No 01 but of capacity 7.5/5HP/3HP

Supply and fix of following parts in repair for single/double/multistage pumps of capacity 60/75 HP as per manufacturer's composition for existing make of pump as described below complete all as specified and directed by Engr-in-Charge:-

Pump impeller made out of Bronze. Make-Kirloskar/Wilo/Mather platt or equivalent make as approved be GE.

Pump shaft of stainless steel complete with check nuts and keys.

Tyre coupling/star coupling .

Gland cup with nuts and bolts.

Shaft sleeves.

Bearing housing.

Supply and fix of following parts in repair for single/double/multistage pump of capacity 30/40/50 HP as per manufacturer's composition for existing make of pump as described below complete all as specified and directed by Engr-in-Charge:-

Pump impeller made out of Bronze. Make-Kirloskar/Wilo/Mather platt or equivalent make as approved be GE.

Pump shaft of stainless steel complete with check nut and keys.

Shaft sleeves.

Casing bearing.

Bearing housing.

Tyre coupling/star coupling.

Gland cup with nut and bolts.

Supply and fix of following parts in repair for single/double/multistage stage pump of capacity 25/20/15/12/10 HP as per manufacturer's composition for existing make of pump as described below complete all as specified and directed by Engr-in-Charge:-

Pump impeller made out of Bronze. Make-Kirloskar/Wilo/Mather platt or equivalent make as approved be GE.

Pump shaft of stainless steel complete with check nut and keys.

Shaft sleeves.

Casing bearing.

Bearing housing.

Tyre coupling/star coupling.

Gland cup with nut and bolts

Supply and fix of following parts in repair for single/double/multistage stage pump of capacity 7.5/5/3 HP as per manufacturer's composition for existing make of pump as described below complete all as specified and directed by Engr-in-Charge:-

Pump impeller made out of Bronze. Make-Kirloskar/Wilo/Mather platt or equivalent make as approved be GE.

Pump shaft of stainless steel complete with check nut and keys.

Shaft sleeves.

Casing bearing.

Bearing housing.

Tyre coupling/star coupling.

Gland cup with nut and bolts

Disconnecting electric connection of 60/75 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts, decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same complete all as specified and directed by Engineer-in-Charge. Note: (a) Winding of motor stator & rotor shall be measured & paid separately.

(b) Rewinding of motor will be measured and paid separately under relevent item. (c) The motor shall be squirrel cage induction motor. (d) The rates quoted shall deemed to be included the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of seviceable motor duly functional and testing complete at its existing location/position complete all as specified and as directed by Engr-in-Charge. (e) Replacement of u/s bearings and grease completely. (f) The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge.

All as per srl item no. 9 but of capacity 30/40/50HP motor

All as per srl item no. 9 but of capacity of 25/20/15HP motor

All as per srl item no.9 but of capacity of of 7.5/5HP/3HP motor

Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 75/60/50/40/30/25/20/15/12/10/7.5/5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding shall deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make.

Replacement of existing unserviceable pump bearing No. 6307 C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 6308 2RS1/C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 6309 M/C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6310 M/C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6311 C3 complete all as specified and directed by Engr-in-Charge. Make:- SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6312 C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6014 C4 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6011 C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 7308 BECBJ complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. 6408 C3 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 22312 E complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 3307 ATN9 complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 7310 BECBJ complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable pump bearing No. 7311 BECBJ complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

Replacement of existing unserviceable motor bearing No. NU 304 ECP complete all as specified and directed by Engr-in-Charge. Make:-SKF,NBC or equivalent

PVC insulated, heavy duty industrial cables (in replacement) single core copper conductor(flexible), PVC insulated cable 1100 volt, nominal area of conductor 95 sqmm including taking down existing old unseviceable cable complete all as directed by Engr-in-charge. Make:- Finolex/Gloster/Universal/Poly Cab/Havells/RPG Cables

ON load change over switch 320 Amps, 415 volts 4 pole (in replacement) side handle operated with stainless steel enclosure including taking down the old existing unserviceable change over switch complete all as specified and directed by Engineer-in-Charge. Make-Havells Cat part No IHCNFE0320 or equivalent make as specified in list of makes and approved by GE.

ON load change over switch 250 Amps, 415 volts 4 pole (in replacement) with stainless steel enclosure including taking down the old existing unserviceable change over switch complete all as specified and directed by Engineer-in-Charge. Make-Havells Cat part No IHCNFE0250 or equivalent make as specified in list of makes and approved by GE.

OFF load change over switch 200 Amps, 415 volts 4 pole (in replacement) side handle operated with stainless steel enclosure including taking down the old existing unserviceable change over switch complete all as specified and directed by Engineer-in-Charge. Make-Havells Cat part No IHCFFE0200 or equivalent make as specified in list of makes and approved by GE.

OFF load change over switch 400 Amps, 415 volts 4 pole (in replacement) side handle operated with stainless steel enclosure including taking down the old existing unserviceable change over switch complete all as specified and directed by Engineer-in-Charge. Make-Havells Cat part No IHCFFE0400 or equivalent make as specified in list of makes and approved by GE.

MCCB, 400 Amps, 4 pole, 415 volts, with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu (in replacement) including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make-Havells Cat part No IHLLSEBF0400 or equivalent make as specified in list of makes and approved by GE.

MCCB, 250 Amps, 4 pole, 415 volts, with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu (in replacement) including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make-Havells Cat part No IHLLSEBF0250 or equivalent make as specified in list of makes and approved by GE.

MCCB, 200 Amps, 4 pole, 415 volts, with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu (in replacement) including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make-Havells Cat part No IHLLSEBF0200 or equivalent make as specified in list of makes and approved by GE.

MCCB, 160 Amps, 4 pole, 415 volts, with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu (in replacement) including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make-Havells Cat part No IHLFNF0160 or equivalent make as specified in list of makes and approved by GE.

MCCB, 100 Amps, 4 pole, 415 volts, with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu (in replacement) including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make-Havells Cat part No IHLFNF0160 or equivalent make as specified in list of makes and approved by GE.

Copper thimble suitable for 95 Sqmm single core copper cable including taking down the existing unserviceable one, complete all as specified & directed by Engr-in-Charge.

Supply and laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 150sqmm 3.5 core laid in trenches,ducts, pipes complete all as specified & directed by Engr-in-Charge. Make:- Finolex/Gloster/Universal/Poly Cab/Havells/RPG Cables

Aluminium thimble of 150sqmm size for cables all as specified and directed by Engr-in-Charge

Fully automatic star delta motor starter in steel sheet enclosure, type MN 65 (in replacement) with single phase protection feature motor rating AC 3 phase, 415 volts, 50 Hz for motor of capacity 100 HP as per cat part No IHPASDYF complete all as specified and directed by Engr-in-Charge. Make-Havells/Indo Asian/L&T

Fully automatic star delta motor starter in steel sheet enclosure, type MN 65 (in replacement) with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP as per cat part No IHPASDYF complete all as specified and directed by Engr-in-Charge. Make-Havells/Indo Asian/L&T

Fully automatic star delta motor starter in steel sheet enclosure, type MN 50 (in replacement) with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 50 HP as per cat part No IHPASDWE complete all as specified and directed by Engr-in-Charge. Make-Havells/Indo Asian/L&T

Fully automatic star delta motor starter in steel sheet enclosure, type MN 50 (in replacement) with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 30 HP as per cat part No IHPASDWE complete all as specified and directed by Engr-in-Charge. Make-Havells/Indo Asian/L&T

Fully automatic star delta motor starter in steel sheet enclosure, type MN 50 (in replacement) with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 20 HP as per cat part No IHPASDWE complete all as specified and directed by Engr-in-Charge. Make-Havells/Indo Asian/L&T

Power contactor 3 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz (in replacement),frame size1 suitable for 75 HP centrifugal pump set complete all as specified and directed by Engr-in-Charge.

MS stud bolts (in replacement) of existing size with nuts suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.

Grouting nuts and bolts (in replacement) of existing size suitable for pumps and motors foundation of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-15, type B-2, (using 40mm graded aggregate) as in sub base filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Plain cement concrete M-5, type E-2, (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed Engr-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth in soft/loose soil getting out and levelling of bottom surface to required level complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick in soft/loose soil all as specified and directed by Engr-in-Charge.

Removing excavated material of any type of soft/loose soil from site to a distance not exc. 50 mtr away and depositing where directed at a level not exc. 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.

Taking up or down GI pipe of following sizes including all fittings complete all as specified and directed by Engr-in-Charge:-

Bore of pipe 150mm dia.

Bore of pipe 100mm dia.

Bore of pipe 80mm dia.

Bore of pipe 50mm dia.

Bore of pipe 40mm dia.

Bore of pipe 25mm dia.

Bore of pipe 20mm dia.

Bore of pipe 15 mm dia.

GI pipes of following sizes, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge:-

Bore of pipe 150mm dia.

Bore of pipe 100mm dia.

Bore of pipe 80mm dia.

Bore of pipe 50mm dia.

Bore of pipe 40mm dia.

Bore of pipe 25mm dia.

Bore of pipe 20mm dia.

Bore of pipe 15 mm dia.

Cast iron fittings (in repair) for spigot and socket ends pressure pipe for water mains such as bends, tapers, tee pieces single branch, cross collar, caps and plugs suitable for 200 to 300mm bore, specifications all as per IS-1538 (Pt-1 to 23)-1976 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 57 here-in-before but upto 150mm bore.

Repair to old sluice valve of 200mm dia for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engr-in-Charge.

All as per serial item No 59 here-in-before but sluice valve of size 150mm dia.

All as per serial item No 59 here-in-before but sluice valve of size 100mm dia.

All as per serial item No 59 here-in-before but sluice valve of size 80mm dia.

Cast Iron sluice valve of 300mm dia size (PN 1.6) ISI Marked with iron wheel head both end flanged, CI /steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 63 here-in-before but sluice valve of size 200mm dia.

All as per serial item No 63 here-in-before but sluice valve of size 150mm dia.

All as per serial item No 63 here-in-before but sluice valve of size 100mm dia.

All as per serial item No 63 here-in-before but sluice valve of size 80mm dia.

Replacement of Cast Iron Non return valve, suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers complete all as specified and as directed by Engr-in-Charge.

Gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.

All as per serial item No 69 here-in-before but of size 40mm dia.

All as per serial item No 69 here-in-before but of size 25mm dia.

All as per serial item No 69 here-in-before but of size 20mm dia.

All as per serial item No 69 here-in-before but of size 15mm dia.

Repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 80 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water at any depth complete all as specified and directed by Engr-in-Charge.

All as per serial item No 74 here-in-before but of dia 100mm bore .

All as per serial item No 74 here-in-before but of dia 150mm bore.

All as per serial item No 74 here-in-before but of dia 200mm bore.

Cast iron air release valve with two air outlets of size 100mm dia (in replacement) including all jointing materials like high pressure rubber gasket nuts, bolts, washers suitable for 300mm/250mm dia pipe with arrangement for fixing, including taking down old unserviceable air release valve, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 78 here-in-before but of size 80mm dia.

Cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing with pre mix bituminuos carpet complete all as specified and directed by Engr-in-Charge.

Water proof fountain light of capacity 10 watt, 12 volt, IP-68 having green light output complete all as specified and directed by Engr-in-Charge. Make: Havells item code 60449515 or equivalent in Philips/Crompton Greaves/Bajaj.

Nipple brass nozzle as per sample including removal of existing unsv one complete all as specified and directed by Engr-in-Charge.

Run lead joints for CI/DI spigot socketed ends pipes of following size in position by providing new lead using good quality spun yarn at any depth, complete all as specified and directed by Engr-in-Charge:-

Bore of pipe 80mm.

Bore of pipe100mm.

Bore of pipe150mm.

Bore of pipe 200mm.

Bore of pipe 250mm.

Bore of pipe 300mm.

GI fittings, medium grade, ISI marked complete all as required at site and as directed by Engr-in-Charge.

Elbow 15mm.

Elbow 20mm.

Elbow 25mm.

Elbow 40mm.

Elbow 50mm.

Socket 15mm.

Socket 20mm.

Socket 25mm.

Socket 40mm.

Socket 50mm.

Union 15mm.

Union 20mm.

Union 25mm.

Union 40mm.

Union 50mm.

Elbow reducer 20 x 15mm.

Elbow reducer 25 x 20mm.

Elbow reducer 40 x 25mm.

Nipple 15 x50mm.

Nipple 15 x100mm.

Socket reducer 25x20mm.

Nipple 20 x50mm.

Nipple 20 x100mm.

Socket reducer 40x25mm.

Nipple 25 x 50mm.

Nipple 25 x 100mm.

Socket reducer 40x20mm.

Nipple 40 x 50mm.

Nipple 40 x 100mm.

Nipple 50 x 50mm.

Nipple 50 x 100mm.

lead wool.

Tee 15mm.

Tee 20mm.

Tee 25mm.

Tee 20x15mm.

Tee 25x20mm.

Tee 40x15mm.

Tee 40x20mm.

Tee 40x25mm.

Dead plug 15mm.

Dead plug 20mm.

Dead plug 25mm.

BARU ENTERPRISES

SHARMA SALES CORPORATION

RANBIR ENTERPRISES

Balbir Enterprises