Supply, installation, testing and commissioning of Laboratory furniture for COMPUTER Lab. at Govt. Degree College Banihal.

Amount

C/D-FRAME SYSTEM All C/D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. C/D-Frame should be constructed from a rectangular pipe with a cross section of 30mm x 30mm / 60mm x 30mm and should be a minimum 1.6 mm/2.0 mm thick. The C/D-Frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. Drainage gradient should be well adjusted throughout the length of table and should have horizontal supports for drainage systems. The Corner Units shall fit well with 770mm & 920mm table depths. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The C/D-Frames should be for suspended storage cabinets HORIZONTAL MEMBERS These should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 30mm x 30mm / 60mm x 30mm with a minimum of 1.6 mm thick. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C/D- Frames together as shown using C-clamps/U-clamps. Together with the C/D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent C/D-Frames. They should be available in various widths of 600, 900, 1200, 1350, 1500 mm

Supply & Fixing of Storage Boxes of Measurements with 1 Shutter of Size L-850 + 850 mm x D-530 mm x H-635 mm Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware is to be of SS-304 Bolting systems. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat.

Providing & Fixing Horizontal Connecting Sets should comprise of 4 elements. One Front Connecting Beam & One Back Connecting Beam, each made up of 2/1.6 mm thick Sheet formed in a “C”/’D’ section, Beams are removable. One Bottom Skirting type connecting Bar of 160±10 mm height, & One Centre Beam should be placed between Back Beam & Skirting Beam. Together with the C/D Frames & Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended

(a)L-1500 mm Connecting Sets

(b)L-1200 mm Connecting Sets

(c)L-900 mm Connecting Sets

(d)L-750 mm Connecting Sets

Supply and fixing of Knee Space having one Footrest made up of 1mm thick sheet (25x50x25mm 'C' Channel type and openable Back Cover Panel of 0.8mm thickness with length :

(a) L-750 mm. Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications

(b) L-600 mm . Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications

(c) L-450 mm . Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications

Providing and fixing of all side cover panels and back panels, filler panels to be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. Size : 185mm x835mm with 15mm bend on all sides.

Single Sided CRCA Electrical Raceway max L-2m, H-125 x D-85 mm Top/Wall Mounted with 3 Nos. 6 Module Cut-outs

The electrical sockets procured from NORISYS / LEGRAND / ROMA / ANCHOR GREATHWHITE or equivalent to be placed on the face of the Regent rack, without wiring

Providing and Fixing of the worktops of size 18mm± 2 mm Jet(Z)-black Granite of an even surface. The exposed edges of the granite to be chamfered and smoothened with underneath Neoprene packing of size 6 mm x 30 mm so as to have dampening effect and better absorption of vibration.

Running Shelf below top ofSize 750 x 250mm with Brackets

Citizen Industries