PROVISION OF CAR PARKING SHED AT JAKLI RTC DHANSAL UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Surface dressing n exc 15cm deep in any type of soil complete all as specified and directed.

M&L excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes, etc n exc. 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 using 40mm graded stone aggregates in foundation filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded aggregates in foundation including rafts footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under-reamed piles mass concrete complete all as specified and directed.

All as per item No 04 above but in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 06 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L formwork to sides of rough finished flat surface of concrete foundation, footing, bases of coulmns, raft and raft beams, sides and soffits (of any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

All as per item No 08 above but sides of rough finished square, circular, rectangular on plan or polygonal surfaces of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L 75mm thick cement conrete type D-2, 1:4:8 using 40mm graded stone aggregates complete all as specified and directed.

M&L machine pressed precast concrete interlocaking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment including a layer of 25mm thick sand cushion (compacted thickness) complete all as specified and directed.

M&L hardcore of broken stone or boulders of gauge n exc. 63mm deposited, spread and levelled in layers n exc. 15mm thick watered and rammed to a true surface complete all as specified and directed.

M&L brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15mm thick plastring in cement mortar 1:4 on fair faces or brick work or concrete surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and appliying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L 75mm thick cement conrete type C-2 1:3:6 using 40mm graded stone aggregates as in plinth protection laid in alternate panels and finished even and smooth without using extra cement complete all as specified and directed.

M&L providing cement concrete kerbs type B1 1:2:4 using 20mm graded aggregates in kerbs, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing bed, plates, water troghs and the like including weathering , slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L cement concrete type B1 1:2:4 using 20mm graded aggregates as in filling, mass concrete, filling in pipes etc complete all as specified and directed.

M&L returning, filling in, including spreading, levelling, watering and well reamming in layers not exc 25cm of any type soil complete all as specified and directed.

M&L removing excavated soil n exc 50m and depositing where directed at a leval n exc 1.5m above the starting point complete all as specified and directed.

M&L for rolled mild steel work in tubular posts, stanchions, including caps, base plates complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, embeded in PCC/RCC complete all as specified and directed.

S&F mild steel work in tubualr trusses including struts, purlins etc with special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping serews complete all as specified and directed.

All as per item No 24 above but plain sheet complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new treated surfaces complete all as specified and directed.

MandeepConstructionCo

M/S PAWAN KUMAR ANAND

JAI JAGDAMBAY ENTERPRISES