CLEANING TO SEWAGE LINES, REPAIRS OF MANHOLES AND ALLIED WORKS IN MARRIED AND OTM ACCOMMODATION AT HQTC BANGALORE

Amount

Cleaning/ removal of blockage of floor trap/ nahani traps of 75 mm/100 mm bore in kitchen/ bathroom/ toilets etc including removing PVC/ stainless steel grating and refixing the same with white cement and pigment to match the surface after making the floor/ nahani trap fully functional complete all as specified and as directed by Engr-in-charge.

Cleaning/ removal of blockage of gully trap any size and any depth including removing RCC covers and refixing the same after making the gully trap fully functional complete all as specified and as directed by Engr-in-charge.

Cleaning/ removal of blockage of Indian type WC and ‘P’/’S’ trap and making fully functional complete all as specified and as directed by Engr-in-charge.

Cleaning/ removal of blockage of Europian type WC ‘P’/’S’ trap and making fully functional complete all as specified and as directed by Engr-in-charge.

Cleaning/ removal of blockage of Europian type WC, ‘P’/’S’ trap including removing carefully, of EWC and cleaning the trap completely and making fully functional and refixing the WC in same position including necessary bolts and making good to disturbed surfaces with white cement and pigment to match the existing surface complete all as specified and as directed by Engr-in-charge.

Cleaning of sewage pipe lines of size upto 100mm dia bore at any depth and removing the blockage by rodding/ by using bamboo split or by mechanical means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered), taking out all debries, sludge or any solid/foreign materials from sewage line and flushing with water and testing after cleaning for leakages/clogging, etc. complete including removing and disinfacted the sludge within 50 metres distance including necessary excavation of pits and returning, filing in sprinkling of bleaching powder @ 0.50 kg/Sqm and dressing of surplus soil, ground to slope if required complete all as specified and as directed by Engr-in-charge.

Cleaning of sewage pipe lines of size upto 150mm dia bore at any depth and removing the blockage by rodding/ by using bamboo split or by mechanical means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered), taking out all debries, sludge or any solid/foreign materials from sewage line and flushing with water and testing after cleaning for leakages/clogging, etc. complete including removing and disinfacted the sludge within 50 metres distance including necessary excavation of pits and returning, filing in sprinkling of bleaching powder @ 0.50 kg/Sqm and dressing of surplus soil, ground to slope if required complete all as specified and as directed by Engr-in-charge.

Cleaning of sewage pipe lines of size upto 200mm dia bore at any depth and removing the blockage by rodding/ by using bamboo split or by mechanical means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered), taking out all debries, sludge or any solid/foreign materials from sewage line and flushing with water and testing after cleaning for leakages/clogging, etc. complete including removing and disinfacted the sludge within 50 metres distance including necessary excavation of pits and returning, filing in sprinkling of bleaching powder @ 0.50 kg/Sqm and dressing of surplus soil, ground to slope if required complete all as specified and as directed by Engr-in-charge.

Cleaning of sewage pipe lines of size upto 300mm dia bore at any depth and removing the blockage by rodding/ by using bamboo split or by mechanical means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered), taking out all debries, sludge or any solid/foreign materials from sewage line and flushing with water and testing after cleaning for leakages/clogging, etc., complete including removing the debries to outside MOD land complete all as specified and as directed by Engr-in-charge.

Cleaning/ removal of blockage of upto 100 mm bore pipes of any description fixed to walls including removing the access plate of bend door and refixing the same after making the pipes fully functional, including all necessary arrangement upto 7th floor complete all as specified and as directed by Engr-in-charge.

Cleaning of blockage in sewage pipe lines between Manhole to Manhole of any bore of pipe and in any depth distance not exceeding 40 M and removing the blockages using by vehicle mounted jet pressure or vaccum system cleaning of pipes and taking out all debries, sludge or any solid/ foreign materials from sewage line and flushing with water and testing after cleaning for blockages/ clogging etc. including removing and disinfacted the sludge within 50 metres distance including necessary excavation of pits and returning, filing in sprinkling of bleaching powder @ 0.50 kg/Sqm and dressing of surplus soil, ground to slope if required complete all as specified and as directed by Engr-in-charge.

Material and labour for De-silting and cleaning of Manholes (as existing shape & size) of depth n.exc 1.0 Meter by pumping out the sewage water complete removing the sluge and other materials from Manholes by Mechanical means , roading or ang other suitable means removing the accumulated Night Soil, Sludge and other materials obtained from sewage lines and disinfacted the sludge within 50 metres distance including necessary excavation of pits and returning, filing in sprinkling of Bleaching powder @ 0.50 kg/Sqm and dressing of surplus soil, ground to slope if required and well flushing the manholes with water complete all as specified and as directed by Engr-in-charge.

Material and labour for De-silting and cleaning of Manholes (as existing shape & size) of depth exc 1.0 Meter but n.exc 2.00 Meter by pumping out the sewage water complete removing the sluge and other materials from Manholes by Mechanical means , roading or ang other suitable means removing the accumulated Night Soil, Sludge and other materials obtained from sewage lines and disinfacted the sludge within 50 metres distance including necessary excavation of Pits & returning, filing in sprinkling of Bleaching powder @ 0.50 kg/Sqm and dressing of surplus Soil, ground to slope if required and well flushing the manholes with water complete all as specified and as directed by Engr-in-charge.

Material and labour for De-silting and cleaning of Manholes (as existing shape & size) of depth exc 2.0 Meter but n.exc 3.00 Meter by pumping out the sewage water complete removing the sluge and other materials from Manholes by Mechanical means, roading or ang other suitable means removing the accumulated Night Soil, Sludge and other materials obtained from sewage lines and disinfacted the sludge within 50 metres distance including necessary excavation of Pits & returning, filing in sprinkling of Bleaching powder @ 0.50 kg/Sqm and dressing of surplus Soil, ground to slope if required and well flushing the manholes with water complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge. Notes: All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state and local regulations.

Material and labour for providing precast cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) as in landings, chamber/ cover slabs (for man holes etc.) and similar articles with plain faces and set in CM 1:4 where required complete all as specified and as directed by Engr-in-charge.

Material and labour reinforcement TMT bars 10mm dia and over, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs mild steel plain black sheet, 1.6mm thick as in cladding, cut to required size , bending or turning up, mitred angles, etc., placed in position and welded complete all as specified and as directed by Engr-in-charge.

Dismantling iron work of any description complete all as specified and as directed by Engr-in-charge.

Supply and fix for cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (articles not exc 5 kg each) complete all as specified and as directed by Engr-in-charge.

All as per item No.20 here-in-before but articles exc 5 kg each.

Material and labour for preparing of old chequered tiled and paver block surfaces/existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard of any colour complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete all as specified and as directed by Engr-in-charge.

Material and labour for praparation of existing treatment of walls and applying one coats of exterior emulsion apex paint (weather coat) complete all as specified and as directed by Engr-in-charge.

Material and labour preparation of old painted plaster surface of any description not otherwise described for road kerb stone, concrete , stone ,brick edging etc, surface over 10 cm width or girth and applying one coat of synthetic eanmel paint of any colour complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of wall and applying one coat of cement based paint complete all as specified and as directed by Engr-in-charge.

Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint complete all as specified and as directed by Engr-in-charge.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation manholes etc and getting out in soft /loose soil complete all as specified and as directed by Engr-in-charge.

Excavation in trenches not exc 1.5m wide and exc 1.5m but not exc 3m depth for foundation manholes etc and getting out in hard/dense soil complete all as specified and as directed by Engr-in-charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in solft/loose soil complete all as specified and as directed by Engr-in-charge.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point soil complete all as specified and as directed by Engr-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and internal dia of pipe150 mm complete all as specified and as directed by Engr-in-charge. Notes: All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state and local regulations.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and internal dia of pipe 200mm complete all as specified and as directed by Engr-in-charge. Notes: All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state and local regulations.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and internal dia of pipe 300 mm complete all as specified and as directed by Engr-in-charge. Notes: All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state and local regulations.

Material and labour for 150mm bore double wall corrugated HDPE pipe (DWC HDPE) of stiffness class designation SN 8 (confirming to IS 16098 Part -2 :2013) (Spigot and socket ended pipe) at site confirming to relevant IS and CPHEEO specification jointing with Rubber gasket, along with all necessary fittings for jointing the pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for 200mm bore double wall corrugated HDPE pipe (DWC HDPE) of stiffness class designation SN 8 (confirming to IS 16098 Part -2:2013) (Spigot and socket ended pipe) at site confirming to relevant IS and CPHEEO specification jointing with Rubber gasket, along with all necessary fittings for jointing the pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for 150mm bore salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed by Engr-in-charge.

Material and labour for 200mm bore salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed by Engr-in-charge.

Material and labour for reinforced concrete pipes 300mm bore, class NP-3, laid and jointed complete with collers complete all as specified and as directed by Engr-in-charge.

Material and labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 200 mm dia pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 300mm dia pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

Demolition of brickwork or stone/boulder/PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-charge.

Material and labour for pre-cast cement concrete block masonary with solid blocks, type C-1 1:3:6 (Using 20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for providing precast cement concrete solid building blocks or slabs, type C-1 1:3:6 (Using 20mm graded stone aggregate), 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. Notes: All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state and local regulations.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured glazed ceramic design tiles 350x 250x 7mm/ 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and as directed by Engr-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for neeru finish to plastering complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of walls complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Material and labour for PCC 1:2:4, type B-0 (Using 12.5mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in floor including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge.

Material and labour for 40mm thick cement concrete type B-0, 1:2:4 (Using 12.5mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm thick cement concrete type C-2, 1:3:6 (Using 40mm graded stone aggregate) as in flooring, plinth protection, bases of water tanks etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:3:6 type C2 (Using 20 mm graded stone aggregate) cement concrete in surface channels and drains complete all as specified and as directed by Engr-in-charge.

Material and labour for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed by Engr-in-charge.

All as per item No.63 here-in-before but add or deduct in each 25mm girth or part thereof over or under 30cm.

Supply and fix in repair ball valves 20mm dia, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs ball valves 25mm dia, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 20mm ball brass valves, high pressure, with polythane float and flynut, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix for tubes 15mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete all as specified and as directed by Engr-in-charge.

Supply and fix for tubes 20mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete all as specified and as directed by Engr-in-charge.

Supply and fix for tube 25mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete all as specified and as directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, outer diameter of pipes in 16mm including taking up or down old pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC 15mm dia pipe of pressure rating 10 kg f/cm² fixed complete to walls, ceiling or in floor etc., any type of pipe including taking up or down old pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC 20mm dia pipe of pressure rating 10 kgf/cm² fixed complete to walls, ceiling or in floor etc., any type of pipe including taking up or down old pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC 25mm dia pipe of pressure rating 10 kgf/cm² fixed complete to walls, ceiling or in floor etc., any type of pipe including taking up or down old pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 20mm bore PTMT nipple suitable for HDPE water tank (Minimum weight 15mm-38gms/20mm-45gms /25mm-65gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 25mm bore PTMT nipple suitable for HDPE water tank (Minimum weight 15mm-38gms/20mm-45gms /25mm-65gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed by Engr-in-charge.

Taking down rain water pipes including all fittings any size and pattern upto 7th floors complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge.

Material and labour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge.

Material and labour for 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 75mm dia, PVC bends with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 110mm dia, PVC bends with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 150mm dia, PVC bends with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 110mm dia, vent cowl in repairs complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs rimless single piece-WC with UF slim seat cover, hinges, fixing accessories and accessories set, cistern fittings, size: 380x670x765mm, S Trap - 300mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling and pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins white or tinted, etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and as directed by Engr-in-charge.

Material and labour for cleaning and removing all scale and dirt, etc from PVC and RCC water tank of capacity exc 250 ltr but not exc 500 ltrs including removing existing writing letters and Re-writing letters as CLEANED ON Month & date by using stencil cutting with Synthetic enamel paint (height of each letter not less than 5 Cm) as affected including wash the tank with water and Bleaching powder after removing scale and dirt etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for cleaning and removing all scale and dirt, etc from PVC and RCC water tank of capacity exc 500 ltr but not exc 1000 ltrs including removing existing writing letters and Re-writing letters as CLEANED ON Month & date by using stencil cutting with Synthetic enamel paint (height of each letter not less than 5 Cm) as affected including wash the tank with water and bleaching powder after removing scale and dirt etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair self threaded water tank Lid /cover with frame 'cooltex type' fixed to existing tank 500/1000 ltrs capacity with joint nut and bolt complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair vitreous china wash down water closet (pedestal pattern, ETWC), white (including fixing bolts) plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair vitreous china squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (concrete) complete all as specified and as directed by Engr-in-charge.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk and branches of any size etc., to a distance of 30 Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination complete all as specified and as directed by Engr-in-charge.

OM ENTERPRISES

SRUSHTI CONSTRUCTIONS

raashi constructions

GKR and CO

SRI GANESH ENTERPRISES

G.M.R.& CO