COMPREHENSIVE MAINTENANCE INCLUDING DAY TO DAY MAINTENANCE TO CERTAIN BLDGS AT UDHAM VIHAR AND AJAY MERU ENCLAVE IN ZONE-III AREA UNDER MIL STN JAIPUR

Amount

SCHEDULE-A PART-I

Comprehensive maintenance, upkeep of all internal and external assets of 624 Md accn at Udham Vihar, 56 Offrs Md accn and Servant Qtrs at Ajay Meru Enclave under AGE B/R-III complete including attending and rectifying day to day complaints, Repair/ Replacement of parts and supply only items (Ref notes here in after), by deploying minimum work force/manpower as stated vide details attached as Appx 'A' from 9 AM to 5 PM. The site includes Dwelling units/ Residence accommodation of officers & JCOs/ORs, therefore the work force must posseses all necessary T&P reqd for the work. Also note that based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours, the work force/man power is required to be increased accordinlgly as decided by Engineer-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account complete all as specified and directed.

Maintenance/ cleanliness of complete sewage drainage system by attending day to day complaints by deploying SEWER MEN (UNSKILLED) from 9 AM to 5 PM excluding sundays/ holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints, repair/replacement of parts, labour for fixing applicable supply only items as enlisted in Sch-A part- II and making the system fully functional wrt sewage drainage system of any depths, opening/cleaning of chocked sewer pipes, drains, manholes, gully traps, WC's, WHB's, sinks, floor/Gully trap etc to all floor and vertical stacks of all sizes to keep sewerage and drainage system fully functional including disposal of silt, sludge malbah, debris, waste material and replacement of damaged Gully traps, oval asses door cover, manhole cover/Gully trap cover etc to the entire satisfaction complete all as specified and directed.

Maintenance, repair/ replacement of Built-in furniture/carpentary items by attending day to day complaints by deploying Carpenters (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints,repair/replacement of parts, labour for fixing applicable supply only items as enlisted in Sch A part-II, including complaints related to built-in furniture/carpentary items including repair of damaged doors, windows, ventilators of Aluminium / steel / wood / PVC etc. at all floors, fixing of glass panes of doors/windows, replacement all types of hardware fittings including T/bolts, sliding door bolts, handles, GI wire cloth, hinges as per existing, looking mirrors, cabinets, photo frames, cupboards etc and all other carpentry works required to keep them in proper functional and to the entire satisfaction complete all as specified and directed

Maintenance, repair/replacemnt of plumbing/sanitary items by attending day to day complaints by deploying plumbers (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes rectifying all the complaints repair/replacement of parts, labour for fixing applicable supply only items as enlisted in Sch A part-II, including complaints related to plumbing/sanitary items including repairing leakages or over flows of water from PVC/RCC overhead tanks, cisterns, replacement of Bib cocks, stop cocks, pillar cock, float valves, PVC Connection alongwith its fittings, EWC seat cover with fittings, SS Jet, Health faucet, waste coupling, waste pipe, kit for low level cistern etc to keep the entire water supply/ sanitary system fully functional to the entire satisfaction complete all as specified and directed

Maintenance, repair/replacemnt of civil Work by attending day to day complaints by deploying Masons (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account.Work like internal and external plaster, flooring, pointing of roof tiles/ CC gola/ RCC work upto an area of 2.5 sqm including replacement of tiles/kota stone/granite upto 1.00 sqm and plastering upto 2.5 sqm, sealing of leakage from roof, walls, wall jonts, chajjas, floors traps, W.C/P traps and joints of pipes & fittings, gully traps and manholes including replacement of damaged floor trap, nahani trap, CI/PVC bends and restoration of existing finishing in the affected area and making fully functional to the entire satisfaction, complete all as specified and directed

Maintenance, repair/replacemnt of Electric Work by attending day to day complaints by deploying Electricians (Skilled) from 9 AM to 5 PM excluding sunday & holidays. The number of workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. The work includes attending complaints related to repair/replacemnt of parts and fixing of supply only items as enlisted in Sch 'A' part II, including replacement of switches, sockets, ceiling roses, fan regulator, MCBs, LED 4 feet/2 feet electric bell, holder, fan bearings, geyser element, CP connection, NRV of geysers, capacitors etc and all other electric works required to keep them fully functional to the entire satisfaction, complete all as specified and directed

Maintenance/upkeeping of all the records and status of all kind of day to day complaints with works by installing Quick Response System (QRS) MES E Complaint system by deploying Data Entry Operators (Skilled) from 9 AM to 5 PM including sunday & holidays. The rates also include cost of compatible computer sytstem, printer, peripherals, consumables, telephone, internet/broad band connection etc comprising of following duties:- (i) Downloading the complaints received from call centre on daily basis for assigning the work to the workers of respective trade. (ii) Uploading all the complaint received at the service centre by any mode in the MES E-Complaint System and uploading the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement. (iii) Preparing abstract for unattended compalint on daily, weekly and monthly basis and submitting the same to concerned Engr-in-Charge. (iv) Generation of vacation/ occupation report from service centre. (v) Failure in maintaining 24x7 QRS in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of QRS after attending emergency complaints may be utilized for attending routine complaints. (vi) The contractor shall take immediate action to attend all complaint lodged on MES e-complaint system or any complaint assigned to him through site order book / verbal instructions from Engineer-in-Charge or on telephones / through call centre of MES e-complaint system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. (vii) The daily complaint monitoring system on the web based portal ARMAAN i.e Daily MES E-complaint System App will be used for lodging and attending complaints will be provided by MES to the contractor. (viii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account.

In subject work the contractor has to deploy adequate number of Helpers (unskilled) from 9 AM to 5 PM excluding sundays/Holidays to assist the skilled workers as mentioned for atteding and rectiying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account.

Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and directed by Engineer-in- charge.

Notes:- (i) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part II) etc or any other material as directed by Engr-in-charge. (ii) The quoted rates shall also incl the labour part for all the supply only items as enlisted under sch A part-II. (iii) Materials retreived from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect. (iv) Apart from above being VIP area, based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account. (v) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained.

(vi) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (vii) It may also be noted that the subject CA is for more than 01 year therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor i/c payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (viii) For the details of the work force/labours required in the subject work refer details attached as Appx A. (ix) Since the outsourcing of man power is involved therefore the overall quoted rate of Sch A part-I shall be not less than minimum fair wages and other applicable allowance as per labour laws/instructions in vogue, failing which the bids shall be treated as non bonafide and shall be summarily rejected. In this regard ref Sch 'A' Note 42.19, 42.20 . The deciision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter

(x) Any other misc works/services connected with user facilitation as per directionof GE/Engr-in-Charge. (xi) Recovery on Absentees The contractor will maintain attendance records of the staff,which will be checked by the Junior Engineer/Engineer-in-charge/GE of the work.In case of any staff,recovery shall be made at the following rates. (a) skilled @1500/- per day/per person. (b) Semi-skilled @1200/- per day/per person. (c) Un-skilled @1000/- per day/per person. (xii) Recovery on non attendence of complaints. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephone,MES call centres/VRS from occupants.In all cases he shall attend the complaints in the specified duration. (a) Complaint pending 3-12 hours -500 Rupees per complaint. (b) Complaint pending 12-24 hours -800 Rupees per complaint. (c) Complaint pending 24-48 hours -1000 Rupees per complaint. (d) Complaint pending More than 48 hours -2000 Rupees per complaint. (xiii) Recovery on non wearing of uniform The employee and labourers engaged by the contrator under this contract shall wear neat and clean uniforms as approved by Engineer-in-charge along with name plates,else recovery shll be made @ Rs 100/- per person per day. (xiv) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years experience or Diploma in Civil Engineering with 05 years experience.

SCHEDULE-A PART-II

Supply only Bathroom Cabinet PTMT of Size 450 x 350 mm complete all as specified and directed.

Supply only Bathroom Cabinet PTMT of Size 500 x 400 mm with hanging system complete all as specified and directed.

Supply only Bottle Trap CP brass 32 mm for Wash Hand basin and Sink complete all as specified and directed.

Supply only ready mix plaster of best quality as approved and complete all as specified and directed.

Supply only Cement ordinary portland, portland pozzolana or portland slag complete all as specified and directed.

Supply only coarse sand locally available of best quality as approved complete all as specified and directed.

Supply only Fine aggregate (sand) for concrete complete all as specified and directed.

Supply only Aggregate of nominal size 20/12.5 mm grade complete all as specified and directed.

Supply only old size Bricks; common burnt clay building bricks, sub-class 'B’ designation 75 complete all as specified and directed.

Supply only Corner shelves Glass with CP guard rail of 4 mm thick 300 x 300 complete all as specified and directed.

Supply only Curtain Rod Stainless Steel of 1.2 M Length with end finials complete all as specified and directed.

Supply only Glass self Corner for bathroom of size 300 x 300 mm with CP guard complete all as specified and directed.

Supply only Glass self of Size 450 x 125 mm with CP double protection rail complete all as specified and directed.

Supply only Health Faucet CP 2 in 1 with 1 meter pipe complete all as specified and directed.

Supply only Health Faucet CP 75 mm dia with 1 meter pipe complete all as specified and directed.

Supply only Helical Door Spring MS of standard size with rail complete all as specified and directed.

Supply only Hydroulic Door Closure suitable for door mass of 61 to 80 Kgs best Quality complete all as specified and directed.

Supply only Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc.,overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete,complete all as specified and directed.

Supply only Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete,complete all as specified and directed.

Supply only Looking Mirror bathroom alum frame 450 x 600 Glass thickness 5 mm complete all as specified and directed.

Supply only MDF Board high density of Size 8'x 4' x 6 mm complete all as specified and directed.

Supply only Mixer wash basin CP brass 15 mm Centre hole complete all as specified and directed.

Supply only Mixer for sink 15 mm CP wall mounting swinging spout long bread complete all as specified and directed.

Supply only Mixer Wall Mounted CP Brass 15 mm non-Telephonic complete all as specified and directed.

Supply only Mixer Wall Mounted CP Brass 15 mm Superior Quality ISI Marked complete all as specified and directed.

Supply only Mixer Wall mounted CP Brass L-bend 2 in 1 complete all as specified and directed.

Supply only Mixer wall mounting telephonic type CP brass 15mm with cruz complete all as specified and directed.

Supply only Plate Rack Stainless Steel of Size 24" x 24" x 10" of 0.8 mm thick complete all as specified and directed.

Supply only Plywood Commercial BWR 12 mm thick type BB complete all as specified and directed.

Supply only Plywood Commercial BWR 9 mm thick type BB complete all as specified and directed.

Supply only Plywood one side teaked face 8' x 4' x 6mm complete all as specified and directed.

Supply only PVC (SWR) Pipe 75 mm dia, Single socketed in any length with rubber rings complete all as specified and directed.

Supply only Brass chromium plated shower rose 125mm size Shower Rose complete all as specified and directed.

Supply only Shower Ultra slim of size 200mmx 200mm CP brass.complete all as specified and directed.

Supply only Towel Ring Square CP Brass 18/20 mm dia complete all as specified and directed.

Supply only Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets complete all as specified and directed.

Supply only Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply Only vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

Supply only Mortice lock 3 lever complete all as specified and directed.

Supply only Mortice night latch, size 65 mm complete all as specified and directed.

Supply only Curtain Rod (Double bracket) OF 1.2 M complete all as specified and directed.

Supply only Cistern kit for EWC complete all as specified and directed.

Supply only Double Action Hinges 4 Inch complete all as specified and directed.

Supply only Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Supply only Vitreuos China WHB 550mmx 400mm complete all as specified and directed.

Supply only modular switch 1 way 6A,1 module complete all as specified and directed .

Supply only modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed .

Supply only modular switch 1 way 16A,1 module complete all as specified and directed .

Supply only modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed .

Supply only modular Fan step regulator 120 watts ,2 module AC complete all as specified and directed .

Supply only modular bell push 2 module AC complete all as specified and directed .

Supply only modular switch 2 way 6A,1 module complete all as specified and directed .

Supply only modular White cover plate with frame,1 module complete all as specified and directed .

Supply only modular White cover plate with frame,2 module complete all as specified and directed .

Supply only modular White cover plate with frame,3 module complete all as specified and directed .

Supply only modular White cover plate with frame, 4 module complete all as specified and directed .

Supply only modular White cover plate with frame,12 module complete all as specified and directed .

Supply only modular PVC blanking plate one module complete all as specified and directed .

Supply only modular Metal flush box 1/2 module complete all as specified and directed .

Supply only modular Metal flush box 3 module complete all as specified and directed .

Supply only modular Metal flush box 4 module complete all as specified and directed .

Supply only modular Metal flush box 12 module complete all as specified and directed .

Supply only Switch piano, flush type single pole, one way 6 Amp complte all as specified & directed.

Supply only Switch piano, flush type single pole, one way 16 Amp complte all as specified & directed.

Supply only Socket outlet 3 pin, 6A, flush type complte all as specified & directed.

Supply only Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complte all as specified & directed.

Supply only ceiling rose 3 phase/PVC/polycarbonate, isolated body 65x50mm, three terminals complete all as specified and directed..

Supply only lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including lamps complete all as specified and directed.

Supply only Fan tepped type electronic /step type regulator piano as per existing required at site, 230 volt,AC, complete all as specified and directed .

Supply only LED light fitting 1x 20 watt Ac decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose, complete all as specified and directed.

Supply only LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.,complete all as specified and directed.

Supply ony LED Bulk Head 1 x10 lumineries including LED light driver holder connecting up with three core flexible copper conductor cable of sutabel size all as specified and directed

Supply only LED bldg security light fittings 25 W,220 V,AC out door type with high pressure die cast aluminum housing and heat resistant complete with driver,lamp GI bracket,suitable clamp ,bolt,nut with impact and corrosion resistant including thermal management in multipal optics complete IP 65/66 protection complete connection suitable size of cable all as specified and directed.

Supply only factory made, sheet distribution boards, SPN 4 ways ,240 volts,double door protection class IP-42 suitable for mounting MCBs/ MCCBs with 200 amps rated bus bar complete all as specified and directed.

Supply only factory made, sheet distribution boards, SPN 12 ways ,240 volts,double door protection class IP-42 suitable for mounting MCBs/ MCCBs with 200 amps rated bus bar complete all as specified and directed.

Supply only Factory made, sheet distribution boards, TPN 4 ways double door,415 volts protection class IP-42 suitable for mounting MCBs/ MCCBs with 200 amps rated bus bar complete all as specified and directed,

Supply only MCB SP 6 to 32 Amp ,10KA 'C' curve 240V complete all as specified and directed.

Supply only MCB SPN 40 to 63 Amp ,10KA 'C' curve 240V complete all as specified and directed.

Supply only MCB TPN 63 to 100 Amp 10KA 'C' curve 415V rupturing capacity 10 KA complete all as specified and directed.

Supply only single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of 20 Amps 220 volt comple all as specified and directed.

Supply only door bell AC 240 volts, single pole complete all as specified and directed.

Supply only bell push, flush type, 6 Amps 240 volts complete complete all as specified and directed.

Supply only Ball-bearings/bush for ceiling fan of (1200/1400 mm) sweep, complete all as specified and directed.

Re-winding the burnt/short circuited winding for ceiling fan of (1200/1400 mm) sweep with same guage super enameled copper wire to maintain speed at load complete all as specified and directed.

Supply only capacitor from 2.15 to 3.15 mfd capacity for (1200/1400) mm sweep, complete all as specified and directed.

Supply only iron body of ceiling fan of suitable for (1200/1400mm) sweep, complete all as specified and directed.

Supply only fan canopy plastic body suitable for any type/any make/any sweep of ceiling fan complete all as specified and directed.

Supply only ceiling fan down rod 15mm dia 45/60mm long suitable for any type of ceiling complete all as specified and directed.

Supply only metallic blade (three blade set) for 1200mm ceiling fan (good quality) complete all as specified and directed.

Supply only PG clamp complete set for hanging of ceiling fan all as complete all as specified and directed.

Supply only Ball-bearings/bush for exhaust fan of (300 mm) complete complete all as specified and directed. .

Re-winding the burnt/shourt circuited winding for exhaust fan of (300 mm) with same cauge supper enameled copper wire to maintain speed at load, complete all as specified and directed.

Supply only exhaust fan motor for (300) mm sweep of desired specifications (ISI Marked) to maintain current speed,air flow at load, complete all as specified and directed.

Supply only Iron blade of Exhaust fan of size 300 mm sweep, complete all as specified and directed.

Supply only louvers of appropriate size for exhaust fan of (300 / 450 mm) sweep, complete all as specified and directed.

Supply only fasteners and backet/legs 0 4 Nos for fixing exhaust fan motor (300/450mm )sweep, complete all as specified and directed.

Supply only capacitor 4 mfd capacity for exhaust fan(300/450) mm sweep, complete all as specified and directed.

Supply only Plug top 3 pin 15 Amps, 230 Volt AC, ISI marked complete all as specified and directed.

Supply only Heating element as per existing 2 KW any type suitable for operation on 230V AC 50Hz complete all as specified and directed.

Supply only Heating element as per existing 1.5KW any type suitable for operation on 230V AC 50Hz complete all as specified and directed.

Supply only Thermostat 40 to 90 degree centigrade varying capactiy for 25 Ltrs capacity Geysercomplete all as specified and directed.

Supply only base assembly(6/9 holes) for 25/50 ltr capacity complete with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut and bolts, washer complete all as specified and directed.

Supply only inner tank 25 ltr capacity made out of heavy duty copper body complete all as specified and directed.

Supply only thermal-cutout with heating sensor rod (capillary type) overload relay/contactor (model T100 20Amp 250 Volts) as per existing sample suitable for 25 litres capacity Geysers, complete all as specified and directed.

Supply only neon indicator lamp round or rectangular type (ISI marked) complete all as specified and directed.

Supply only pressure release safety valve for Geysers spring loaded suitable for 15 mm pipe chromium plated (ISI marked), complete all as specified and directed.

Supply only flexible copper wire PVC insulated, 3 core, 2.5 Sqmm dia multistranded, complete all as specified and directed.

Supply only Chromium plated stainless steel pipe connection for cold water inlet/ hot water outlet pipe of size 15 mm dia complete with nipple/adaptors 450mm long (ISI marked), complete all as specified and directed.

Supply only PVC connection pipe threaded type for cold water inlet/ hot water outlet pipe of size 15 mm dia complete with nipple/adaptors 450mm long (ISI marked) make- prayag/polytuf, complete all as specified and directed.

Supply only Gun Metal non return valve 15mm dia and connecting up complete ISI marked complete all as specified and directed.

Supply only helium sheet top cover any size as per existing required for mounting piano type switches,socket,fan regulator at site incl. screw complete complete all as specified and directed.

Notes :- (i) To incorporate Gp-I makes only in the subject work. If due to non availabiltiy or any other reasons, the directions of GE/Engr-in-Charge shall be final and binding to incorporate other makes after the sample approval. Any make of sub standard/poor quality shall be replaced immediately and nothing extra shall be admissible on this account. (ii) The labour charges for all the supply only items of sch A part II is deemed to be included in sch 'A' part I. Nothing extra is admissible on this account.

SCHEDULE-A PART-III

M&L Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white wash on wall complete all as specified and directed.

Description all as per item No 117.00 above but applying two coats of white wash complete all as specified and directed.

Description all as per item No 117.00 above but applying one coat of white wash on ceiling complete all as specified and directed.

Description all as per item No 117.00 above but applying two coats white washing on ceiling complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

Description all as per item No 121.00 above but applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of wire mesh surfaces by brushing and applying a coat of synthetic enamel paint on GI wire mesh complete (measured over all one side only) complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth and applying one coat of synthetic enamel paint,complete all as specified and directed.

Description all as per item No 124.00 above but applying two coats of synthetic enamel paint.complete all as specified and directed.

M&L for complete removal of existing old treatment on surface from walls with mechanical scrapper (machine) ,preparing the entire surface by applying 1mm thick birla/ JK wall care putty on walls surface finished even and smooth and finally applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed.

M&L for complete removal of existing old treatment on surface from walls with mechanical scrapper (machine) ,preparing the entire surface by applying 1mm thick birla/ JK wall care putty on ceiling surface finished even and smooth and finally applying two coats of oil bound distemper on ceiling surface with roller brush complete all as specified and directed.

M & L for preparing old surface including washing, rubbing, filling holes,and uneven surface finishing old surfaces even and smooth with ,JK/Birla Wall care putty/POP, and applying one coat of oil bound distemper on wall/ceiling surfaces with roller brush complete complete all as specified and directed.

M&L for complete removal exising treatment of old surfaces of wall by scrubbing with mechanical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and repairing surface after filling of any minor holes/depression by wall care putty to obtain unifom surface to walls and applying Two coats of CEMENT BASED paint complete all as specified and directed.

Complete removal exising treatment of old surfaces of wall scrubbing by with machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying 1mm birla wall care putty and Two coats of weather proof exterior acrylic emulsion paint of ANTI DUST of Berger or APEX SHINE from Asian paint over one coat of primer from the same manufacturer even and smooth with roller brush complete all as specified and directed.

Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high by using of synthetic enamel paint including white enamal paint on base etc complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm each and not exceeding 4.0 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and directed.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified and directed.

S&F for 100 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete complete all as specified and directed.

S&F for MS 300mm size, door spring ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified and directed.

S&F for galvanized stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed .

S & F 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I.

S & F 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I complete all as specified and directed.

Dismantling boarding , any description, fixed in any position with screws complete all as specified complete all as specified and directed.

S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified and directed.

S&F PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings complete all as specified and directed.

S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelame PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimu of 4 Nos. of screws to be provided for each vertical member and minimum 2 Nos for Horizontal members Complete all as per manufacturers specifications complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type)complete all as specified and directed.

S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete ,complete all as specified and directed.

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before)complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames)complete all as specified and directed.

S&F Powder coated aluminium windows and ventilator shutters fixed having aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips rubbers packing anodized including sheet glass 5.5 mm thick complete all as specified and directed.

S&F Powder coated aluminium windows and ventilator shutters, side hung type with sash bars,purposely made for fixing window type air conditioners,exhaust fans etc;aluminium section weighing 0.55 kg/m two nos. of aluminium coated 100 mm long tower bolt,one no. 100 mm long aluminium handle , One no. 150 mm long Aluminium peg stay,two nos aluminium coated 100mm long Hinge ,rubber beading , in each window shuttersc complete all as specified and directed.

S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified and directed.

S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire mesh and glass pan shall be measured seperately ). Incl M&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete complete all as specified and directed.

M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified and directed.

M & L for Non skid 600x600x8 to 10mm thick coloured double charge vitrified tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles , complete all as specified and directed.

Description all as per item No 159.00 above but 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified and directed.

M& L for Non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6, complete all as specified and directed.

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces of walls etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed.

M&L for Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl 10mm thick screed bed in CM(1:4) complete all as specified and as directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down steel tubing & connections complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore including taking up or down steel tubing & connections complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 25mm bore including taking up or down steel tubing & connections complete all as specified and directed.

Welding in repairs. Exc 2.5cm but n.exc 5 cm in length and exc 6 mm but n.exc 9 mm thickness of metal complete all as specified and directed.

Demolition and cleaning of sunken portion including M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement laster in CM 1:4 mixed with water proofing liquid @ 150ml per bag of cement. (ii) Preparing plastered surfaces and provinding APP polymetric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/sqm of make super thermolay manufactured by STP ltd or hyper plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplus' (Polyster) manufactued by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, woth a thermo fusble finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch with a Over lap of 75 mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsin bitumiouns primer all as per manufacture instrctions including prepartion of surface and filling lean concrete 1:5:10 type E2 with brick bats complete all as specified an as directed Note:- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The Waterproofing treatment shall be got crried out by the manufacture or their authorised applicatiors (iii) Above aspects are deemed to be included in quoted rate (iv) Supply only water proofing liquid shall be measured and paid seperaterly Note : Slab area only will be measured for payment purpose.

M&L for roof treatment as per the description below:- a) Plain cement concrete average 40 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .complete all as specified and directed.

M & L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M& L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose Soil complete all as specified. Note:- Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor complete all as specified and directed.

Excavation in trenches in any type of soft/loose soil not exc 1.5m wide and exc 1.50 mtr but not exc 3.00 mtr in depth for foundation etc and getting out in soft loose soil complete all as specified. Note:- Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor complete all as specified and directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose/disintegrated soil complete all as specified and directed.

Removing excavated material to a distance of 15 kms and depositing where directed complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD) / 163(ID) mm & 200(OD) / 175(ID) internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm) complete all as specified and directed.

S&F DWC PE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed.

S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed.

M&L PCC 1 : 4 : 8 type D-2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified and directed.

M&L for PCC 1 : 2 : 4 type B-1 using 20mm graded aggregates as in surfaces channels and drainscomplete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stoped ends etc complete all as specified and directed.

M&L Providing RCC type B-1 20mm graded aggregate 1:2:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes of 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for providing cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B-1, 1 : 2 : 4 using 20mm graded aggregate and set in CM 1 : 4 complete all as specified and directed.

Supply and fixing in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation, returning filling, removal of surplus soil and PCC bedding and haunching in below ground level bore of pipe 100mm complete all as specified and directed.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 100mm bore with or without duck's foot or heel rest in any length (larger bore measured) complete all as specified and directed.

M&L for Hiring of vechicle mounted suction machine with recycling facility for cleaning /destling /maintance of sewer lines and manholes of under ground drainage system complete all as specified and directed.

Disconnecting existing water tanks of capacity exc 250 liters but not exe 500 Ltrs setting aside or lowering if required for cleaning and reconnecting or refixing in same position,including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc and including neatly writing date of cleaning (DD/MM/YY) upto 10 mm thick and upto 100 mm height each bold capital/ Italic letters with white/black synthetic enamel paint all complete all as specified and directed.

Description all as per item No 189.00 above but capacity of tank exc 500 liters but n.exc 1000 Liters complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 except bricks complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished even and fair, by using WPC (deemed to be included in the quoted rate) @ 3% by weight of cement complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15 cm thick (below or above ground level) complete all as specified and directed.

S&F Chequered cement concrete PU coated colourtiles 30cm X 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments to match over and incl 15 mm thick screed bed in 1:6 complete complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Description all as per item No 198.00 above but except tiles complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) and removing out side MD land complete all as specified and directed.

M&L for providing cement concrete type B-1 1:2:4 (20mm graded aggregate) as in copings complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in flooring/subbase/plinth protection complete all as specified and directed.

M&L for providing 100 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing complete all as specified and directed.

M&L PCC Type C-2 (1:3:6) 40 mm graded aggregate in surfaces channel or drains complete all as specified and directed.

M&L for hard core consisting of broken bricks of gauge nexc 63 mm, deposited spread leveled in layers nexc 25 cm,complete all as specified and directed.

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete Type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, butresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed on walls 110mm dia fixed in repairs complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Forming contraction (Dummy) Joints 65mm deepx10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc. complete all as specified and directed.

M&L Preparation of new or previously Untreated surface of stone, concrete or plaster surfaces of any with priming paint plaster coat description over 10cm girth or width, not otherwise described two coat of Synthetic enamel paint complete all as specified and directed.

M&L old painting surface of stone, concrete or plaster surfaces of any description over 10cm girth or width, not otherwise described one coat of Synthetic enamel paint complete all as specified and directed.

S&F Chequered cement concrete PU coated colourtiles 30cm X 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments to match over and incl 15 mm thick screed bed in 1:6 complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and directed.

M&L Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM 1:4 Type B-1 1:2:4 (20mm graded aggregate ) complete all as specified and directed.

M&L for cleaning of drain vegitation silt muds etc complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4,complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed.

Description all As per item no 224.00 before but except bricks complete all as specified and directed.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of wall of brick work or concrete surface, finished even and smooth by using WPC (deemed to be included in the quoted rate) @ 3% by weight of cement complete all as specified and directed.

M&L for rendering 5 mm thick in cm 1:3 ceiling of concrete/brick surfaces even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of ANTIDUST of BERGER or APEX SHINE of Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

M&L for new plaster surface two coat of oil bound destemper over 1mm thick of birla white putty including preparation of newly plastered surface etccomplete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L complete removal by macanical means of existing surface and applying two coats of Weather base Paint over 1mm wall care putty complete all as specified and directed.

M & L for preparation of existing surface using brush, sand paper, surface to be repaired if required, filling putty in holes & depression to obtain even and uniform surface and applying one coats of Weather base Paint complete all as specified and directed.

M&L for preparation for new steel or iron surfaces of any description , not otherwise described ,exc 10 cm girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complte all as specified and directed

M&L for preparation for old steel or iron surfaces of any description , not otherwise described ,exc 10 cm girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complte all as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M & L for complete removal of existing surface of wall by mechanical means and using brush, sand paper, surface to be repaired if required, filling putty in holes and applying two coat of cement based paint over one coat primer complete complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for rolled miled steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) conforming Fe-410 -W (Gde E- 250) quality A. complete all as specified and directed.

MS rolled sections as in trusses, purlins, crane gantries and heavy brackets framing etc, (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410 -W (Gde E- 250) quality A.complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc complete all as specified and directed. .

M&L Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

M&L for Point wiring complete with 1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl. concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked , including MS sunken box for mounting fitting like Modular switches, sockets, fan regulators ,cover plate etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings complete all as specified and directed.

(a) One light / fan /bell controlled by one, one way switch complete all as specified and directed.

(b) One 3 pin 5 Amp socket out let on the same board with other switches complete all as specified and directed.

(c) One 5 Amp socket independent controlled by one, one way switch complete all as specified and directed complete all as specified and directed.

Description all as per Item No 250.00 above but PVC conduit 25 mm dia medium grade with all accessories ISI markedcopper with conuctor cable of size 2.5 Sqmm for 3 pin switch socket outlet 15Amp independent board complete all as specified and directed.

Description all as per Item No 250.00 above but PVC conduit 25 mm dia medium grade with all accessories ISI marked with copper conuctor cable of size 4 Sqmm for 3 pin 15 Amps socket outlet on independent board, including 4.0 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed.

M&L for Point wiring complete with 1.5 Sqmm single core ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green)PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings complete all as specified and directed.

(a) One light/fan /bell point controlled by one, one way switch with cables 1.5sqmm size complete all as specified and directed.

(b) One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and directed.

(c ) One 3 pin 5 Amp socket outlet on independent with cables 1.5sqmm size complete all as specified and directed.

Description all as per Item No 256.00 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including2.5Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed

M & L in replacemnt of sub main wiring with two single core 6.0 Sqmm PVC insulated FR-LSH unsheathed cable multi-stranded copper conductor drawn through and including PVC casing capping 25x15 mm medium grade with all fittings and fixing accessories on roof, walls, ceiling etc. including 6.0 Sqmm PVC insulated unsheathed one core multistranded copper conductor earth wire complete all as specified and directed.. (Note: Two run of 6 sqmm and one run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one length) complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth 4 mm dia by means of galvanised wire with iron bolts , nut and washers and connected to other end to main DBs duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and directed. ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner) complete all as specified and directed.

Notes:- (a) Sch A part III is an independent schedule in which M & L, S&F items are to be executed. No labour / item of Sch A part I & sch A part II resp must be overlapped with sch A part III items and vice-a-versa. Any violation of the aforesaid provision noticed by GE/Engineer-in-Charge/JE, the related work done shall not be measured/paid and in addition the penalty of Rs 1500.00 shall be levied and recovered from the contractor dues. (b) To incorporate Gp-I makes only in the subject work. If due to non availabiltiy or any other reasons, the directions of GE/Engr-in-Charge shall be final and binding to incorporate other makes after the sample approval. Any make of sub standard/poor quality shall be replaced immediately and nothing extra shall be admissible on this account. (c) Any M & L, S & F items which are not mentioned under sch A part III to VI and are required to be executed the Sch 'A' notes No 41.02 and 41.03 on CA shall be referred regarding procedure of incorporating the same.

Schedule of Credit

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3294229)

AMIT RISHABH BUILDERS PVT LTD (BID ID -3294870)