SPECIAL REPAIRS TO ARREST HEAVY SEEPAGE IN BLDG NOS P6 AND P8 OF TECHNICAL COMPLEX AND SPECIAL REPAIRS TO DRAINAGE SYSTEM AT CQA ME RESIDENTIAL COMPLEX AUNDH PUNE

Amount

Removing of old water proofing treatment and cleaning the surface of slab with wire brush, removing dust,foreign materials and removing the rubbish off the premises all as specified and directed by Engr-in-Charge.

M & L for PCC M-15 grade (nominal mix) using 12.5 mm graded stone aggregate) on roof top for maintaining of slope coving,benching etc all as specified and directed by Engr-in-Charge.

M&L for rendering 10 mm thick on concrete surfaces of roof in CM 1:3 mixed with liquid water proofing compound as per manufactures instructions finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engr-in-Charge. Note : Liquid WPC shall be measured and paid seperately under relevant item of BOQ.

M & L for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) complete all as per manufacturers instructions.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for bore of pipe, complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing and connection of 20 mm dia in new or old position walls, ceiling, floor etc with new fittings complete all as directed.

Disconnecting existing tanks exc 500 & not exc 1000, setting asides (or lowering if required) for repairs, cleaning, waterproofing etc and hoisting if required reconnecting and re-fixing in position complete.

Disconnecting existing tanks exc 1000 & not exc 2000, setting asides (or lowering if required) for repairs, cleaning, waterproofing etc and hoisting if required reconnecting and re-fixing in position complete.

Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc removing rubbish out side the premises complete all as specified and directed by Engineer-in-charge

Raking out joints/ pointingin cement or cement lime mortar to random rubble or polygonal rubble uncoursed or brought up to courses on edge in floors, surface channels, roofs, etc

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 finishing surface even and smooth all as specified and directed by Engr-in-Charge

M&L for rendering 10mm thick, on concrete surfaces of ceiling in CM 1:4 finishing the surface even and smooth complete all as specified and directed by Engr-in-Charge

M&L for Dubbing out cement plaster average 10mm thick on irregular face of stone rubble walling in CM 1:4 all as specified

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.

M&L Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L coloured Glazed ceramic tiles in vertical surface of size 300mmx450mm x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement plaster 10mm thick as in backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S & F Vitrified ceramic coloured tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1:4, set and jointed in neat cement lsurry and pointed in white or coloured cement to mathch the surfaces of tiles.

M&L for 75mm thick PCC M-10 grade (nominal mix) using 20mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement.

M& for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing paint from steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st quality ) over a coat of red oxide primer including preparations of steel surface complete all as specified and as directed.

M&L painting to wooden surfaces of any description over 10 cm width or girth including prepration of old or untreated surface and applying one coat of synthetic enamel paint all as specified.

M&L for preparation newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exerior paint (100%) Acrylic over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified.

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of alkali resistant primer over wall care putty not less than 1mm thick finishing surface even and smooth complete all as specified.

M&L complete removal of existing treatment on wall & applying two coats of oil bound distemper of approved colour and pattern over a coat of alkali resistant primer over wall care putty not less than 1mm thick finishing surface even and smooth complete all as specified.

M&L preparation of newly plastered surfaces on ceiling and applying two coats of white wash over wall care putty not less than 1mm thick finishing surface even and smooth complete all as specified.

M&L for Complete removal of existing treatment of ceiling & applying applying two coats of white wash over wall care putty not less than 1mm thick finishing surface even and smooth complete all as specified.

Demolition of cement concrete un reinforced in ground floors and pavings n.exc 15 cm thick below or above ground level.

Demolition of brick work, PCC block mansonry or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

Demolition of precast RCC as in cover slabs etc.

Demolition and breaking up drain pipes of 300 mm bore RCC/SGSW set in cement mortar and of taking out from trenches if required.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed

M&L for PCC M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified.

M&L Cement concrete M-10 grade (nominal mix) using 40mm graded aggregate in surface channels and drains all as specified

M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan, exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan, exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6, but except PCC block complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete M-10 grade (nominal mix) uisng 20mm graded stone aggregate as in copings, filleting etc complete all as specified and directed.

S&F of Reinforced concrete pipes of 150mm dia, class NP2, laid and jointed with cement complete with collars all as specified.

M & L for Pre-cast RCC M-15 grade (nominal mix) using 20mm graded aggregate as in cover slabs including necessary formwork set in CM 1:4 all as specified and directed. Note :Reinforcement shall be measured and paid separately .

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

M & L for rendering 15 mm thick on fair faces of block masonry surfaces in cement plaster 1:4 all as specified and directed

V.R.PRAJAPATI AND CO.

Aishwarya Constructions

Sunrise Traders