Improvement works to the Restaurant and Reception Bar 8 nos of Deluxe rooms and 6nos of Suite Block at Hotel Tamilnadu Krishnagiri.

Amount

Shedule A(Restaurant,Kitchen)

Dismantling the existing damaged Door frames with Flush Doors and ventilators and stacking them for condamanation directed by the departmental engineers etc., complete complying with standard specification.

Dismantling the existing EWC,Wash basin etc.and carefully stacking for auction etc., complete complying with standard specification.

Dismantling and clearing away of existing flooring / wall tiles work in cement mortar including shifting the dismanted materials to outside the premises with lead upto 10km , from the city limit including loading and unloading directed by the departmental engineers etc., complete complying with standard specification.

Dismantling and clearing away of existing brick masonary work in cement mortar including shifting the dismanted materials to outside the premises with lead upto 10km , from the city limit including loading and unloading etc.., complete. Complying with standard specification

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain cement concrete 1:5:10 (One cement, five sand and ten aggregate) using 40mm HBGS Jelly for foundation and basement as per standard specification.

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Brickwork in Cement Mortar 1:5 (One cement and five sand) using II class Ground Moulded chamber burnt bricks of size 9" x 4 1/2" x 3" in foundation and basement including curing etc complete complying with standard specification.

Plastering with in cement mortar 1:5 (One Cement and Five Sand) 12mm thick including in cost and conveyance of all materials and labour charges etc complete. As per standard specification.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadoing the side walls and floors joint free special glazed tiles of approved quality colour design and of size 300mm x 600mmx8mm in cement mortar 1:2 and pointing with white cement including finishing the joint and polishing the tiles surface glassy etc., complete.

Providing and fixing Kerb Stone of size 0.45 X0.15 X 0.30 Mtr of RCC precast concrete by a new one of following size in RCC 1:2:4 mix using 20mm gauge hard broken graninte stone jelly and river sand excluding cost of reinforcement but including charges fabrication charges curing neat finishing etc., and labour charges for fixing the jally in position complying with standard specification as directed by the departmental officers

Providing, Fabrication, erecting & fixing in position steel works as detailed and as directed at all levels using MS hollow section, squares etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to insert plate, embedding in wall / concrete and finished the surface neat after grouting. Rate shall include for painting with two coats of dark grey colour synthetic enamel paint over a coat of zinc chromate primer, etc. complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc. as complete with all respects complying with relevant standard specification as directed by the departmental officers.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour over full putty finished old wall surfaces including cleaning,preparing the surface etc.,complete complying with standard specification and as directed.(The plastic emulsion paint should be got approved by the corporation officers)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug directed by the departmental engineers etc., complete complying with standard specification.

Supplying and fixing in position best quality approved make colour oval shape wash hand basin Cascade NXT C0431 of size 550X400 mm with a pair of cast iron brackets over 20mm thick granite top of Jet Black, including cost of 15 mm diameter Swan Neck pillar cock (T7203A1),32 mm diameter C.P. Waste union,32 mm diameter P.V.C.Waste pipe with rubber plug and chain ,15 mm diameter G.M. dia nylon connections and Bottle trap etc., including fixing the wash hand basin in the wall in position with a pair of C.I.brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leackage etc.,complete complying with standard specifications(the wash hand basins and specials should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

PVC Pipe 75mm dia

75mm dia Elbow

75mm dia Door Elbow

Supplying laying and jointing CPVC pipes best variety conforming to ISS including fixing CPVC specials and fixing to wall in concealed manner,making holes on the wall or drilling holes in roof etc.,and making good of the dismantled portions etc.,complete under concealed internal water supply arrangements

32mm dia CPVC pipe

20mm dia CPVC pipe

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of M.S. Weld mesh 7.5 x 2.5cm. 10 Gauge in the proper position for openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including Preparation of Surfaces etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one the existing painted wood surfaces in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing and laying of Hot applied thermoplastic compound 2.50 mm thick including reflectising glas beads @ 250gms Per area thickness of 2.50mm is exclusive of surface applied glas beads as per IRC : 35 the finished surface to be level uniform and free from streaks and holes etc., completed (as per MORTH & Specification No. 803)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of RG-06 unarmoured Co- axial cable for TV in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of 2 pair unarmoured 0.5mm telephone cable in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 1 no one module TV socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 1 nos RJ-11 I/O Socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of LED 9 Watts Indoor Ceiling Spot Light, including giving electrical connection etc., complete. Corvus Concealed COB / SPOT LED Light stain nikel model: LCOBR07SN

Supply and installation of 20W 4 feet LED tube light fitting with its electrical connection etc., complete.

Supply and fixing of 300mm SL Bracket with fancy glass shade and 40w bulb.

Supply and fixing of 8 way vertical triple pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 63A 4P MCB as incoming and 24 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make).

Supply of Royaloak Melaka Malaysian 2 Door Wardrobe with Melamine Finish (SKU WR2019100-2) of size Length - 31.5 X Width - 20.5 X Height - 76 Inches or 0.80mx0.52mx1.93m as shown in the sketch made out of 18mm thick MDF board having load bearing capacity of 100 kg / m2 and resistance to insect attach,fungus,water and fire both side laminated for inner shelves and 18mm thick PVC foiled MDF board for front doors and side including cost of 180° CP auto close hinges 6" stainless steel ornamental handles etc., complete.

Supply of Royaloak Nova Café Chair Brown SKU ODC3008 having Length : 18 x Width : 19 x Height : 32.5 Inches made out high grade fiber. The four legs and three cross supports to be provided for back rest. The rate is including cost and conveyance of all materials etc., complete.

Supplying and fixing of Berlynoak Charger Coffee Table (SKU CT1290010R) Ornamental Teapoy of size Length-40.5in X Width-22in X Height-17.5in or 1.00mx0.55mx0.45m(H) made out of best solid wood scantlings (3"x3" legs),2"x2" teak wood runners all round top and bottom and intermediate and 2"x1" teak wood runners at 0.10m centre to center for rack arrangements and top covered by 12mm thick Termite free water proof plywood and finishing the wood surfaces with best melamine polish finish etc., complete.

Providing and fixing of 5.50 mm thick dressing mirror of approved make in toilet to 0.90 m x 0.75 m size with necessary back up water proof ply 6 mm thick, fixing the glass and ply with teakwood frames of size 40 x 25 mm alround with necesssary screws etc complete in all respects

Supply and fixing of Royaloak Muar Malaysian Bed Side Table (SKU ST20191002) of size Length 17.5 x Width 15.5 x Height 15.5 Inches or 0.45x0.40x0.40m using 19mm thick HDF board With Melamine Finish of approved quality and make .The box to be made with 19mm thick HDF Board ,the exposed surfaces to be finished with melamine and the bottom supported by 1'' thick bush, the rate is including cost of all material, Making charges and conveyance etc. complete.

Shedule-B(Deluxe Room-8 Nos)

Dismantling the existing damaged Door frames with Flush Doors and ventilators and stacking them for condamanation.

Dismantling the existing Dadooing wall tiles and flooring tiles and clearing away the debrises from the site.

Dismantling the existing EWC,Wash basin etc.and carefully stacking for auction.

Dismantling the Brick work in cement mortar under 3.00 m height etc.., complete. Complying with standard specification

Dismantling the existing R.C.C Lintels, Columns and roof slab as directed by the departmental engineers including conveyance charges with lead of 5km away from campus etc., complete complying with standard specification.

Earthwork excavation in all soils and sub soils with an initial lead of 10m and lift of 2m in hard stiff clay, stiff black cotton, hard earth, shales, muram, gravel, stoney earth and earth mixed with small size bolders including bailing out water if necessary etc. complete.

Filling in foundation and basement with river sand to a thickness not more than 15cm layers including watering and consolidation etc. complete.

Plain cement concrete 1:5:10 (One cement, five sand and ten aggregate) using 40mm HBGS Jelly for foundation and basement as per standard specification.

Brickwork in Cement Mortar 1:5 (One cement and five sand) using II class Ground Moulded chamber burnt bricks of size 9" x 4 1/2" x 3" in foundation and basement including curing etc complete complying with standard specification. a)In ground floor upto 4.50m height

Brick Partition wall in CM 1:3 (One Cement &three Sand) 11.40 cm thickness using II Class chamber burnt bricks of size 9"x41/2 x 3" using hook iron with reinforcement if found necessary etc.,complete

Supplying and erecting centering for sides and soffits includingnecessary supports and strutting upto 3.29 M height for plane surfacesas in all floors with all cross bracings using Mild Steelsheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steelangle of size 25mm x 25mm x 3 mm for boarding laid over silver oakjoists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centreand supported by casurina props of 10cm to 13 cm dia spaced at notmore than 75 cm centre to centre etc. complete complying with thestandard specificaiton.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, reta?d setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Plastering with in cement mortar 1:5 (One Cement and Five Sand) 12mm thick including in cost and conveyance of all materials and labour charges etc complete. As per standard specification.

Supply and fixing II class Teak wood for frames 100x75mm size of door including all material and labour charges for teak wood wrought and put up in position and the size and section as per the architural drawings & Specification directed by the departmental engineers etc., complete complying with standard specification.

Teak Wood Scantlings 2m in length

T.W.Scantling upto 3m

Supplying and fixing of moulded melamined door 3 pannel rose wood finish both sides 35mm thick inclouding fixing of furniture fitting such as 5" Brass Hinges,.Brass Tower Bolts, BrassHandles and 10" Brass aldrops etc.Complete as per standard specification.

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m using 75mm x 50mm size WPC frame as allround frame with necessary brass furniture fittings such as 125mm x 25mm brass hinges-3Nos , 200mm x 12mm brass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, T.W lippings around the shutter etc., including cost and conveyance of all materials complying with standard specification.

Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and fixing UPVC (Un-plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and the shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as Handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even atmost ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.The Connecting mechanism between sash and outer frame that enables opening of the window.The window shouild be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive engineer before use on work.

Supplying and fixing UPVC (Un-plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and the shutter profile size of 60x78mm both profiles are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the luvers.The ventilator shouild be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The Ventilator should be got approved from the Executive engineer before use on work.

Dadoing the side walls and floors joint free special glazed tiles of approved quality colour design and of size 300mm x 600mmx8mm in cement mortar 1:2 and pointing with white cement including finishing the joint and polishing the tiles surface glassy etc., complete.

Finishing the bath room flooring with antiskid floor tiles of size 13"x13" (Johnson) laiding CM 1:3 and pointing the joints to the full depth of the tiles with same colour cement as per standard specification etc.complete.

Paving the floor with Vitrified tiles of approved quality (colour and shade as directed ) of size 600mmx600mmx8mm in all floors over a base layer of cementr mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with standard specification. The make and brand of the tiles should be got approved by project engineer prior to execution.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing false ceiling with Hilux or equivalent board using standard size GI channels at a spacing of not more than 1200mm cc and 10mm thick Hilux board with necessary drops with approved designs at appropriate places to an ornamental shape including directed by the corporation officers complying with standard specification.

Applying the full putty using wall putty of approved quality over the old painted wall surfaces and ceiling including scrapping, cleaning, applying putty and bringing the surfaces to a smooth of finish including cost of all

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour over full putty finished old wall surfaces including cleaning,preparing the surface etc.,complete complying with standard specification and as directed.(The plastic emulsion paint should be got approved by the corporation officers)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Polishing the teak wood door frames with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing colour Jaquar or Parryware or equivalent European water closet (wall hung or wallvit type) with built in concealed cistern without frame of dual flush type (6 Lit/3Lit) of compacted size of wallvit pal type 545mmx365mmx375mm or wall hung size of cardiff model and seat cover matching the closet of approved quality and brand (Jaguar /Parryware cardiff or Equivalent )The rate is including cost of all other fittings are gold plated such as 15mm angle cock-1 No(Jaguar Queens or Equivalent),15mmx600mm nylon connection -1 No (Jaquar or Equivalent)

Supplying and fixing in position best quality parryware make white Wall hung wash hand basin of size 510 X 400 x 175 mm (Model-Sutra C041) with Short Pedastal of Size 275 X 215 x 360 mm (Model-Sutra C0320) including cost of 15 mm diameter brass chromium plated pillar tap (Model-G3302A1), 15mm diameter angle valve (Model-T4607A1/G5207A1) 32 mm diameter C.P. Waste Coupling (Model-T9898A1), 32 mm diameter P.V.C.Waste pipe with rubber plug and chain ,15 mm diameter G.M. dia nylon connections etc., including fixing the wash hand basin in the wall in position with teak wood plugs and screws and giving necessary water supply connection and including testing for leackage etc.,complete complying with standard specifications(the wash hand basins and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 1000 x 780 x 5.5 mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete

Supplying laying and jointing CPVC pipes best variety conforming to ISS including fixing CPVC specials and fixing to wall in concealed manner,making holes on the wall or drilling holes in roof etc.,and making good of the dismantled portions etc.,complete under concealed internal water supply arrangements

32mm dia CPVC pipe

20mm dia CPVC pipe

Supply and fixing 32mm dia Gun metal gate valve (Heavy Duty) of approved quality (ISI) and brand including cost and conveyance of all materials complying with standard specification.

Supplying and fixing best quality of parryware make of C.P. wall mixer 2 in1 (Model-G3316A1) , Wall Mounted 15"over head showerarm (Model-T9802A1) and Sleek Shower (Model-T9975A1) and necessary fittings etc complying with standard specification.

Supplying and fixing Parryware make T6001A1 C.P.type towel rail 60cm long and 20mm dia etc..complete complying with standard specifications.

Supplying and fixing C.P.Soap tray of size 150mmX100mm including cost of Teak Woodplugs,brass screws complete complying with standard specifications.(Parryware or equivalent make T6003A1)

Supplying and fixing in position PVC Nahini trap of various sizes with best stainless steel gratings of approved brand and quality ,fixed over a bed of brick jelley lime concrete 1:2:5(one part of lime two parts of sand and mortar 1:3 (one cement and three sand ) including dismandling masonry works wherever found necessary and making good the damaged portions to the original and giving connections to the cast iron pipe as directed etc.,complete,complying with standard specification.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

PVC Pipe 110mm dia

PVC Pipe 75mm dia

Elbow 110 mm dia

Door Elbow 110 mm dia

Elbow 75mm dia

Door Elbow 75mm dia

Supplying and fixing C.P.type toilet Paper holder with flap of approved make Model T6914A1 (Parry Trio) as per Standard specifications. etc., complete

Supplying and fixing 1/2" CP health unit Two way bibcock(Model-G5234A1) with SS Health faucet(Model-T9805A1) of approved make.(Parry Trio) as per standard specifications.

Providing and fixing in position of door double curtains with suitable curtain rod from Deco or approved make directed by the departmental engineers etc., complete complying with standard specification.

Providing and fixing in position of curtain rods ake directed by the departmental engineers etc., complete complying with standard specification.

Providing and fixing dressing table as per drawing but in general, it shall be made out of 19 mm thick BWR plywood on all sides and intermediate shelves with necessary and the openable shutter shall be made out of 19mm thick BWR plywood with necessary teakwood supports etc complete. All exposed surfaces shall be finished with 1.5 mm thick Laminate of shade approved by the architect and all inner / recessed surfaces shall have 1mm thick laminate finish of shade approved by the architect. Rate to include all hardwares, auto closing cabinet heavy duty hinges, handles - of approved make, including locking arrangements with master key of approved make etc. complete a)Providing and fixing of mirror of size as per approved for dressing unit. But in general 6mm thick mirror with aluminium frame for backing frame fixing with the existing 12MM thick BWR ply fixing with stainless steel studs. All side of the mirror shall be covered with Teak wood beading finished with melamine polish.

Supplying and fixing of table cum suitcase storage units, 600mm depth and 750mm height made of 18 mm thick exterior grade prelaminated particle boards for verticals, horizontals, shutters and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardware's etc; complete. The exposed edges of prelam boards shall be finished with 2mm thick PVC edge band. a)Suitcase Rack

Providing and fixing of TV units made of 19 mm thick BWR plywood finished with 1.5 mm thick laminate of approved make and colour for the exposed surfaces as approved by the architect. The TV unit drawer shall also be made of the same material but the inner surface of the drawers shall be finished with 1.00 mm laminate of approved make and colour as approved by the architect. The Backing of the unit shall be of 8 mm thick BWR provided with strip lights and necessary arrangement as per drawings. a)Drawer - soft close - Hettich brand

Supply of Royaloak Ashoka Queen Size Cot in Sheesham Wood SKU BD20151001-5 Cot of size 5'3" x 6'11" or (Length 83 X Width 63 X Height 38.5 -Inches) having head rest of size-63"x24", foot board size-63"x15" Using sheesham wood Scantling of Size 6" x 1-1/2" for allround frames, 4"X1-1/2" for Intermediate frames (4Nos), and 4" x 4"x15" for legs (4Nos). The top portion is covered with 12mm thick Termite free water proof plywood. Necessary sheesham wood beading of size 2"x3/4" are to be provided on top of alround frame. The alround frame is to be made with ornamental design and the entire exposed surface are polished with melamine polish to a glossy finish after preparing the surface with required sealer coatings. The rate is including cost and conveyance of all material and as directed by the corporation officers complying with standard specifications.

Supply and fixing of Royaloak Muar Malaysian Bed Side Table (SKU ST20191002) of size Length 17.5 x Width 15.5 x Height 15.5 Inches or 0.45x0.40x0.40m using 19mm thick HDF board With Melamine Finish of approved quality and make .The box to be made with 19mm thick HDF Board ,the exposed surfaces to be finished with melamine and the bottom supported by 1'' thick bush, the rate is including cost of all material, Making charges and conveyance etc. complete.

Supplying and fixing of Berlynoak Charger Coffee Table (SKU CT1290010R) Ornamental Teapoy of size Length-40.5in X Width-22in X Height-17.5in or 1.00mx0.55mx0.45m(H) made out of best solid wood scantlings (3"x3" legs),2"x2" teak wood runners all round top and bottom and intermediate and 2"x1" teak wood runners at 0.10m centre to center for rack arrangements and top covered by 12mm thick Termite free water proof plywood and finishing the wood surfaces with best melamine polish finish etc., complete.

Supply of Royaloak Nova Café Chair Brown SKU ODC3008 having Length : 18 x Width : 19 x Height : 32.5 Inches made out high grade fiber. The four legs and three cross supports to be provided for back rest. The rate is including cost and conveyance of all materials etc., complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of RG-06 unarmoured Co- axial cable for TV in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of 2 pair unarmoured 0.5mm telephone cable in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and fixing of 1 no.6/16 A two module socket , 1 no. 32A one module SP MCB with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 1 no one module TV socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 2 nos one module RJ- 45 I/O socket ans 2 nos RJ-11 I/O Socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 12 watts ceiling spot light fitting including giving electrical connection etc., complete.

Supply and installation of 20W 4 feet LED tube light fitting with its electrical connection etc., complete.

Supply and installation of 18W 2 feet LED Mirror light fitting with its electrical connection etc., complete.

Supply and fixing of 300mm SL Bracket with fancy glass shade and 40w bulb. make Lukar, modle: MAIRA GPS1

Supply And installation of LED Footlamp light fitting with its electrical wiring connection etc, complete.

Supply and laying of cove light (Led strip) warm white colour with electrical wiring connection, etc., complete.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230v 50 c/s single phase AC supply on suitable TW board with push switch to that with its electrical connection etc., complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") including giving electrical connection etc., complete.

Supply and fixing of Ac exhaust fan 225mm (9") sweep (light duty) with necessary louvers shutters arrangements including giving electrical connection etc., complete

Supply and installation of 32 A Key tag card type Legrand make or equivalent to that with its electrical connection etc., complete

Shedule-C(Improvements to the Bar )

Dismantling the existing damaged Door frames with Flush Doors and ventilators and stacking them for condamanation directed by the departmental engineers etc., complete complying with standard specification.

Dismantling the existing EWC,Wash basin etc.and carefully stacking for auction etc., complete complying with standard specification.

Dismantling the gypsum false ceiling in the neccesary areas and shifting the debris away from the site etc.., complete.

Dismantling and clearing away of existing flooring / wall tiles work in cement mortar including shifting the dismanted materials to outside the premises with lead upto 10km , from the city limit including loading and unloading directed by the departmental engineers etc., complete complying with standard specification.

Dismantling and clearing away of existing brick masonary work in cement mortar including shifting the dismanted materials to outside the premises with lead upto 10km , from the city limit including loading and unloading etc.., complete. Complying with standard specification

Earthwork excavation in all soils and sub soils with an initial lead of 10m and lift of 2m in hard stiff clay, stiff black cotton, hard earth, shales, muram, gravel, stoney earth and earth mixed with small size bolders including bailing out water if necessary etc. complete.

Suppply and Filling in foundation with 'M' sand in suitable thick layers well rammed and consolidated including watering complying with standard specifications.

Plain cement concrete 1:5:10 (One cement, five sand and ten aggregate) using 40mm HBGS Jelly for foundation and basement as per standard specification.

Supplying and erecting centering for sides and soffits includingnecessary supports and strutting upto 3.29 M height for plane surfacesas in all floors with all cross bracings using Mild Steelsheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steelangle of size 25mm x 25mm x 3 mm for boarding laid over silver oakjoists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centreand supported by casurina props of 10cm to 13 cm dia spaced at notmore than 75 cm centre to centre etc. complete complying with the standard specificaiton.

Footing centering

Column

Roof beam & Roof slab & Lintel

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brickwork in Cement Mortar 1:5 (One cement and five sand) using II class Ground Moulded chamber burnt bricks of size 9" x 4 1/2" x 3" in foundation and basement including curing etc complete complying with standard specification.

Upto Basement

Ground floor upto 4.5m

Brick Partition wall in CM 1:3 (One Cement &three Sand) 11.40 cm thickness using II Class chamber burnt bricks of size 9"x41/2 x 3" using hook iron with reinforcement if found necessary etc.,complete

Plastering with in cement mortar 1:5 (One Cement and Five Sand) 12mm thick including in cost and conveyance of all materials and labour charges etc complete. As per standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Finishing the bath room flooring with antiskid floor tiles of size 13"x13" (Johnson) laiding CM 1:3 and pointing the joints to the full depth of the tiles with same colour cement as per standard specification etc.complete.

Dadoing the side walls and floors joint free special glazed tiles of approved quality colour design and of size 300mm x 600mmx8mm in cement mortar 1:2 and pointing with white cement including finishing the joint and polishing the tiles surface glassy etc., complete.

Applying the full putty using wall putty of approved quality over the old painted wall surfaces and ceiling including scrapping, cleaning, applying putty and bringing the surfaces to a smooth of finish including cost of all directed by the corporation officers complying with standard specification.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour over full putty finished old wall surfaces including cleaning,preparing the surface etc.,complete complying with standard specification and as directed.(The plastic emulsion paint should be got approved by the corporation officers)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Supplying and fixing false ceiling with Hilux or equivalent board using standard size GI channels at a spacing of not more than 1200mm cc and 10mm thick Hilux board with necessary drops with approved designs at appropriate places to an ornamental shape including directed by the corporation officers complying with standard specification.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug directed by the departmental engineers etc., complete complying with standard specification.

Supplying and fixing UPVC (Un-plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and the shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as Handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even atmost ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.The Connecting mechanism between sash and outer frame that enables opening of the window.The window shouild be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive engineer before use on work.

Supplying and fixing UPVC (Un-plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and the shutter profile size of 60x78mm both profiles are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the luvers.The ventilator shouild be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The Ventilator should be got approved from the Executive engineer before use on work.

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m using 75mm x 50mm size WPC frame as allround frame with necessary brass furniture fittings such as 125mm x 25mm brass hinges-3Nos , 200mm x 12mm brass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, T.W lippings around the shutter etc., including cost and conveyance of all materials complying with standard specification.

Supplying and fixing in position C.I. Nahini trap of various sizes with best stainless steel gratings of approved brand and quality ,fixed over a bed of brick jelley lime concrete 1:2:5(one part of lime two parts of sand and mortar 1:3 (one cement and three sand ) including dismandling masonry works wherever found necessary and making good the damaged portions to the original and giving connections to the cast iron pipe as directed etc.,complete,complying with standard specification.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

PVC Pipe 110mm dia

PVC Pipe 75mm dia

PVC 110mm dia Elbow

PVC 110mm dia Door Elbow

PVC 75mm dia Elbow

PVC 75mm dia Door Elbow

Supplying, laying and jointing of following dia CPVC pipe of approved make as per standard specifications including fixing cpvc specials and cutting, threading of pipes and conceiling the pipes inside wall with necessary clamps and nails for 1 RM.

32mm dia CPVC pipe

20mm dia CPVC pipe

Supply and fixing 32mm dia Gun metal gate valve (Heavy Duty) of approved quality (ISI) and brand including cost and conveyance of all materials complying with standard specification.

Supplying and fixing colour Jaquar or Parryware or equivalent European water closet (wall hung or wallvit type) with built in concealed cistern without frame of dual flush type (6 Lit/3Lit) of compacted size of wallvit pal type 545mmx365mmx375mm or wall hung size of cardiff model and seat cover matching the closet of approved quality and brand (Jaguar /Parryware cardiff or Equivalent )The rate is including cost of all other fittings are gold plated such as 15mm angle cock-1 No(Jaguar Queens or Equivalent),15mmx600mm nylon connection -1 No (Jaquar or Equivalent)

Supplying and fixing 1/2" CP health unit Two way bibcock(Model-G5234A1) with SS Health faucet(Model-T9805A1) of approved make.(Parry Trio) as per standard specifications.

Supplying and fixing in position best quality parryware make white Wall hung wash hand basin of size 510 X 400 x 175 mm (Model-Sutra C041) with Short Pedastal of Size 275 X 215 x 360 mm (Model-Sutra C0320) including cost of 15 mm diameter brass chromium plated pillar tap (Model-G3302A1), 15mm diameter angle valve (Model-T4607A1/G5207A1) 32 mm diameter C.P. Waste Coupling (Model-T9898A1), 32 mm diameter P.V.C.Waste pipe with rubber plug and chain ,15 mm diameter G.M. dia nylon connections etc., including fixing the wash hand basin in the wall in position with teak wood plugs and screws and giving necessary water supply connection and including testing for leackage etc.,complete complying with standard specifications(the wash hand basins and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white Parryware (C05831C )urinal of best quality and approved make of size 380x405x590 mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing marble slab 20mm thick both side polish and fixed in wall in cement mortar 1:3 for urinal partition including cost conveyance, fixing in position etc complete

Supplying and fixing in position best quality approved make white glazed earthernware sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages directed by the departmental engineers etc., complete complying with standard specification.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Labour charges for providing double nosing on granite edges with grinding machine including polishing etc., complete complying with standard specification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supply and Installation of CNC cut designer board with 50mm thick external grade MDF board. All the exposed surface shall be finished with Duco paint of approved shade. The designer board to be fixed with necessary aluminum supports / suspended hangers, wires etc. Area of the perforated screen will be measured and paid. Design to be approved by Architects. Working at all levels and heights directed by the departmental engineers etc., complete complying with standard specification.

Supplying and fixing of Back storage Racks of size 2.60m x 1.50m height Made of MS square tube frame (25mm square tube) structure with paint finish, back wall with approved make and shade of acrilyc finished. Few storages with 18mm thick niche with polish finish which is including of cost of all material , labours and convenyace charges etc complete...complying with standard specification.

Providing and fixing in position of Bar Counter unit of Size 3.30m x 1.05m using sandwitched panels of using 19 mm and 12mm BWR for top and and side panels finished with adequate support from all sides including drawer with storage unit etc complete. The exposed surfaces shall be finished with 3.5mm thick veneer of approved colour and shade with melamine polish directed by the departmental engineers etc., complete complying with standard specification.

Supplying and fixing of Snacks storage Racks of size 2.95m x 2.20m height Made of MS square tube frame (25mm square tube) structure with paint finish, back wall with approved make and shade of acrilyc finished. Few storages with 18mm thick niche with polish finish which is including of cost of all material , labours and convenyace charges etc complete...complying with standard specification.

Supplying and fixing of Bottle storage Racks of size 4.30m x 2.20m , 3.00m x 2.20m & 4.90m x 2.20m Made of MS square tube frame (25mm square tube) structure with paint finish, back wall with approved make and shade of acrilyc finished. Few storages with 18mm thick niche with polish finish which is including of cost of all material , labours and convenyace charges etc complete...complying with standard specification.

Supply and Installation of GFRC pots of size 600mm wide & 450 depth for planter box with base for water collection arrangement directed by the departmental engineers etc., complete complying with standard specification.

Supplying of Photo Frame of 0.60 x 1.0m size with the scenaries as approved and fixed on the 3 mm thick ply outer framed with architectural teakwood beadings of size 35mm x 15 mm polished with melamine glossy / matt finish directed by the departmental engineers etc., complete complying with standard specification.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin modlue socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of RG-06 unarmoured Co- axial cable for TV in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of 2 pair unarmoured 0.5mm telephone cable in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 1 no one module TV socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 1 nos RJ-11 I/O Socket with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of LED 7 Watts Indoor Ceiling Spot Light, including giving electrical connection etc., complete. Corvus Concealed COB / SPOT LED Light stain nikel model: LCOBR07SN

Supply and installation of 20W 4 feet LED tube light fitting with its electrical connection etc., complete.

Supply and fixing of 300mm SL Bracket with fancy glass shade and 40w bulb.

Supply and laying of cove light (Led strip) warm white colour with electrical wiring connection, etc., complete.

Auto Electrical water heater with copper container , with glass wool/ puf insulation with MS powder coated shell suitable for 25 ltr capacity 230v / 1000w.

Supply and installation 8 inches PVC Air ventilation Exhaust fan with its electrical connection etc.,complete.

Supply and fixing of 8 way vertical triple pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 63A 4P MCB as incoming and 24 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make).

GST at 18%

Karpaga Vinayagar Engineer Construction (BID ID -1272807)