Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 CrAdmitted-Finance | ₹11.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹11.5 CrAdmitted-Finance | ₹11.5 Cr | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical NOT QUALIFIED |
| 4 | Rejected-Technical MUMBAI 400023 | MUMBAI | MAHARASHTRA | 400023 | - | - | Rejected-Technical NOT QUALIFIED |
| 5 | Rejected-Technical | - | - | Rejected-Technical NOT QUALIFIED |
| Sl No | Description | Qty | Unit | DEVARSH CONSTRUCTION CO L1 | TIRUPATI SARJAN LIMITED L2 |
|---|---|---|---|---|---|
| 1.00Items : | |||||
| 1.01 | Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(B) By manual/mechanical means in area of thorny jungle | 1.56 | Ha. | 70,200 ₹70,200 | 1,26,360 ₹1.3 L |
| 1.02 | Earth work in excavation by manual/mechanical means for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift for all kinds of soil. | 4,658.8 | Cu.m | 6,98,820 ₹7.0 L | 11,69,358.8 ₹11.7 L |
| 1.03 | Excavation for foundation upto 1.5 m to 3.0 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift for all kinds of soil | 193 | Cu.m | 28,950 ₹28,950 | 48,443 ₹48,443 |
| 1.04 | Disposing off the un-used excavated earth, debris, malba, dismantled materials for all lead and lift/ depth out at non objectional place as directed by Engineer-in-charge. Disposing off the excavated stuff for lead upto 3km | 2,463.8 | Cu.m | 2,46,380 ₹2.5 L | 3,72,033.8 ₹3.7 L |
| 1.05 | Supplying and Filling in foundation/plinth with murrum or selected soil brought from outside with CBR value higher than 7% in layers not exceeding 20 cm. in depth with including watering, ramming and compacting using mechanical vibrator (static / pneumatic) of required capacity, including freight, transportation, loading, unloading, screening, passes etc. all complete as directed by the Engineer-in-charge (Consolidated measurements of fill shall be paid for under this item). The rates shall be all inclusive using mechanical /manual means (For all civil, plumbing and electrical works). | 127.2 | Cu.m | 69,960 ₹69,960 | 1,14,607.2 ₹1.1 L |
| 1.06 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means) | 1,508 | Cu.m | 90,480 ₹90,480 | 1,88,500 ₹1.9 L |
| 1.07 | Preparation and consolidation of sub grade with Rolling of earthwork in layers with power roller including filling in depressions which occur during the process including watering of earthworks (after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc.) | 623 | Cu.m | 21,805 ₹21,805 | 69,153 ₹69,153 |
| 1.08 | Filling in plinth/under flooring with coarse sand under floors including watering ramming, consolidating and dressing complete with CBR value higher than 7%. | 99 | Cu.m | 1,73,250 ₹1.7 L | 1,43,649 ₹1.4 L |
| 1.09 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth | 4 | Each | 3,200 ₹3,200 | 5,000 ₹5,000 |
Tender Value
₹11.3 Cr
EMD Value
₹21.3 L
Closing Date
30 Mar 2021, 5:00 pmClosed
Chief Technical Officer, DSCL, Diu
Office of Diu Smart City Ltd. 2nd Floor, Diu Municipal Council, Fort Road, Diu
Beautification and Landscaping of Diu Fort, Diu 4th Call
2021_DIUDT_1391_1
31/2020-21/DSCL-DIU
Open Tender
Civil Works - Others
540 days
Diu
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
Yes
The Chief Executive Officer, DSCL, Diu
₹21.3 L
Yes
DMC, Diu or Via Video
28 Apr 2021
10 Mar 2021
3 Apr 2021
10 Mar 2021
30 Mar 2021
10 Mar 2021
16 Mar 2021
Items :
Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(B) By manual/mechanical means in area of thorny jungle
Earth work in excavation by manual/mechanical means for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift for all kinds of soil.
Excavation for foundation upto 1.5 m to 3.0 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift for all kinds of soil
Disposing off the un-used excavated earth, debris, malba, dismantled materials for all lead and lift/ depth out at non objectional place as directed by Engineer-in-charge. Disposing off the excavated stuff for lead upto 3km
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)
Preparation and consolidation of sub grade with Rolling of earthwork in layers with power roller including filling in depressions which occur during the process including watering of earthworks (after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc.)
Filling in plinth/under flooring with coarse sand under floors including watering ramming, consolidating and dressing complete with CBR value higher than 7%.
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth
Providing and laying in position cement, sand and grit mixture as cement concrete for levelling purpose in 1:3:6 proportion (1: Cement, 3: Sand, 6: 6mm grit or per size gravel)
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete including cost of formwork in Foundation, Plinth, Road works, structures.
Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in Foundation,Plinth, Road works, Pavements
Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete including cost of Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.
Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Walls, from top of foundation level upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.
Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts upto floor two level including cost of Fair /Expose RCC finish Formworkwith centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.
Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs, landing, lintels, shelves, Balconies and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.
Providing material and labour for laying controlled cement concrete M25 produced in batch mix machine, using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Plinth beam, Girders, Lintels and Cantilever upto floor two level including cost of Fair /Expose RCC finish Formwork with centering, steel/ply shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.
Providing TMT Bar Fe 500D reinforcement for R.C.C. work including bending, binding with GI wires and placing in position complete upto floor two level (Brands: Tata, Sail, Vizag, RINL, Jindal)
Providing anticorrosive treatment to HYSD/Fe 500D bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars : Upto 28 mm dia.(The rate should be including working in tidal conditions)
Steel works: Providing material and labour for fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, ISMB, ISMC, UC, H-Section, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bars, Angles, MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts. All confirming to latest relevant IS codes for the work of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap, rungs, Roof canopy, fencing posts, M.S. Screen etc. including straightening, cutting, bending, bolting and welding the members including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal putty to make the surface even and smooth, applying a priming coat of read lead paint over all the surfaces of the steel sections. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by EIC. (Standard measurements will be paid for as actual cut length used at site) .(Brand: Tata Steel, Jindal)
Providing material and labour for Structural steel work ( Confirming to IS 4923-1997 Hollow sections) riveted, bolted or welded in builtup for all type sections, in framed work or any type of structural work, including cutting, hoisting, bending, fixing in position at any height and applying a priming coat of approved steel primer and 2 coats of enamel paints all complete as per the structural designs and directions of Engineer in charge.) Including making of any designer sculptures by cutting, hoisting, fixing, bending to required curvature, scaffolding etc. as per drawing. The contractor shall prepare shop drawings as per GFC drawings and actual site condition. (Brand: Tata Steel, Jindal)
Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete.
Providing and fixing stainless steel (Grade 316) Railing and baluster system of approved make stair railing, hand rail, bump rail, guard rail, with knock down system made of Hollow or solid secion i.e. tubes, square, flat, plates, bar etc with base plate Cover cap, finishing accessories, infilled holding brackets, fixing accessories etc. for any type of design, shape (plain/ curvature), size as per drawing. Railing shall be top mounted or side/ wall mounted. Railing shall be fixed with SS 316 grade anchor fastner of required size and as per fixing position of approved make. No Weilding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system uptill handling over the project.
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 10 mm.
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
Coursed rubble masonry with hard stone of approved quality in foundations and plinth in Cement Mortar 1:6 (1-Cement : 6-coarse sand) etc. complete. (more than 10 ton)
Providing and laying of White Stone Bela masonry block in course in foundation with stone of approved quality in cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.
Providing and laying of White Stone Bela masonry block in course in superstructure with stone of approved quality in cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.
Providing and laying of white stone bela masonry work in partition walls upto 15 cm thickness in cement mortor 1:5 (1- cement : 5 course sand ), including packing the joints etc. complete
Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S
Providing and fixing 35 mm thick flush door filled with country wood, water proof flush door single shutters with 1 mm thick lamination sheet on both sided (Make:Greenlam/Royale Touche/ Euro/ all sides of shutters) with lipping edging patti all around the door including using 2 Nos pull SS handles in satin finish of the size 25mm diameter, 30 cm long made from anticorrosive high grade AISI 316 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anticorrosive high grade AISI 316 stainless steel tower bolt, four numbers of anticorrosive high grade AISI 304 stainless steel hinges of size 102 mm x 76 mm x 3 mm of the make KICH & anticorrosive high grade AISI 316 stainless steel aldrop of 10 mm diameter x 20 cm ( make ORBIT, Kich) in satin finish, with fixing SS heavy duty screws to the frame as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS
Providing & fixing Louvers of Anodized aluminium sections as horizontal members at 75 mm c/c and 100 x 25 x 2 mm (Wt. 1.16 kg/m) aluminium vertical section 125x25X2 mm (Wt. 1.43 kg/m) with SS Pipe 30cm SS 316 handle, High quality SS hinges including fixing and erection on site and making surface good etc. complete as per design for doors/windows/ventilators.
Providing & fixing Locks Godrej Mortice lock cover (with 3 sets of key) with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing, cutting and core the doors in exact dimensions, without damaging the shutter or frames up to the satisfaction of engineer in charge with Standard warranty of 1 year
Providing & fixing Door closers hydraulic with brand logo with ISI, IS: 3564 embossed on the body, with all required tools and tackles, screws, in line & level etc complete upto satisfaction of engineer in charge (Brand: Godrej, Ozone, Equivalent)
Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with Hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge.
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 (1-cement : 4-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick
Providing and fixing 20mm thick Granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for wall cladding,plaforms, vanity counters, window sills , facades, in linear as well as curvilinear surfaces and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:2 (1 cement : 2 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Including fixing granite stone, over and above corresponding basic item, in facia, wall cladding and drops with polymer based Chemical adhesive, including cleaning etc. complete. For all wall Caldding and Copping work also as per drawing including all colour and texture. (Brand for Adhesive:MYK Laticrete, Weber,Kerakoll)
Providing Edge moulding upto 25 mm thick Granite/Kota/ other stones counters, Vanities, steps/ riser etc., including machine polishing to edge to give high gloss finish etc.including wastage,rubbing, cutting, curing and polishing etc complete as per design approved by Engineer-in-Charge.
Providing and laying coloured glazed tiles 8 mm thick of the size 300x 200 mm / 300x 450 mm / 300x600mm in skirting, risers of steps and dado on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. (make Johnson, Kajaria, Asian, RAK, NITCO).
Providing and Laying broken China mosaic flooring for terrace using 12 to 20 mm broken pieces of only white glazed tiles (Bell/ Somany/ Johnson/ kajaria/ Cera/ Spartek/Orient / Nitco) to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar cream out up to surface using white cement including off junctions and extending them up to wall top, curing with water and cleaning with oxalic acid etc as directed.
Providing and fixing five courses water proofing treatment with bitumen felt consisting of second and fourth course of blown / bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base bitumen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface excluding grading complete.
Providing and laying Antiskid vitrified tiles 0.6x0.6m in floor (thickness to be specified by manufacturer) with residue of approved make and shade as per drawing with water absorption less than 0.08% and confirming to IS: 15622, laid over 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) bedding of approved make, in all colours and shades. Finishing shall be done with pointing the joints with grey cement slurry at 3.3kg/sq m including grouting the joints with white cement and matching pigment, including curing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete for all floor all height as directed by Engineer-in-charge. (Brands: Johnson, Kajaria, Asian, RAK, NITCO)
Providing and applying Lime Mortar 1:1:1 ( 1 Slaked lime:1 surkhi:1 course sand) in floors and walls.
Pointing on stone work of pathways with Lime Mortar 1:1:1 ( 1 Slaked lime:1 surkhi:1 course sand) Flushed/ Ruled Pointing Including curing, finishing, making grooves, etc. complete as directed by the Engineer-in charge. Providing and applying lime plaster by Wetting the surface. Remove all the dust particles .Applying lime upto required depth .
Providing and fixing Rajula Kerb stone 100mm thick, Lenght from 300mm to 600mm and Ht. 300 mm laid in position to the required line, level, curvature, including rubbing and polishing complete with pointing of lime mortar 1:1:1 (1 lime :1surkhi:1 coarse sand) true to line and level,(thickness of joints except at sharp curve shall not to more than 10mm), including filling up of joints with finishing, cleaning, rubbing making drainage opening wherever required complete etc. as directed by Engineer Incharge.
Providing and laying of Coursed rubble masonry with hard/ Local stone (first or second sort) in superstructure above plinth level and upto two floor level Masonry work, in lime mortar 1:1:1 (1 lime : 1surkhi:1 coarse sand) Masonry work (first sort)
Providing and laying 80 mm thick Rajula Cobble stone (Size: 10x10/ 14x14/ 14x20 cm) block hand cut with machine cut 25 mm deep top edges, rounded edges as required and chisel dressed on top, for paving in floors, drains etc. laid over 50mm minimum thick base of cement mortar 1:4 (1 cement: 4 coarse sand)with 10-15mm wide pointing/grouting work of lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) including dressing, rubbing, curing, rounded edges, wedge, tappering, cleaning etc. Complete with no more than 5mm floor top level variation (the rate shall be for different patterns and details provided by the Architect. No extra amount will be paid for residues to be used to achieve the pattern). All sides of stone to be 25mm deep machine cut to achieve best edge quality and design. (Colour: Grey)
Providing and laying flooring in Rajula Stone slabs of 80 mm thickness, Min width 20 cm and Max. length 60 cm in size as per design laid over 50mm minimum thick base of cement mortar 1:4 (1 cement: 4 coarse sand)with 10-15mm wide pointing/grouting work of lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) including dressing, rubbing, curing, rounded edges, wedge, tappering, cleaning etc. Complete with no more than 5mm floor top level variation (the rate shall be for different patterns and details provided by the Architect. No extra amount will be paid for residues to be used to achieve the pattern). All sides of stone to be 25mm deep machine cut to achieve best edge quality and design. (Colour: Grey)
Providing and laying flooring works of Local/ Dhangdhra Stone Slabs 80 mm thickness, sizes as per design over 80 mm (average), 50mm minimum thick base of cement mortar 1:4 (1 cement: 4 coarse sand)with 10-15 mm wide flushed pointing work of lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including dressing, rubbing, curing, rounded edges, wedge, tappering, cleaning etc. Complete with no more than 15mm floor top level variation (the rate shall be for different patterns and details provided by the Architect. No extra amount will be paid for residues to be used to achieve the pattern).
Providing and laying Flamed finish machine cut Rajula stone of 20-22 mm thk stone slab/ flooring/wall mounted with edge cutting in required sizes, design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings over 25 mm (average) thick base of lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) laid and jointed with lime slurry of matching shade including rubbing, curing and polishing of granite etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing and fixing 20-22 mm thick machine cut Rajula stone for wall cladding,plaforms, vanity counters, window sills , facades, in linear as well as curvilinear surfaces and similar locations of required size, approved shade, colour and texture backing filled with a grout of average 20-25 mm thick base of lime mortar 1:1:1 ( 1 Slaked lime: 1 Surkhi: 1 Coarse sand), including pointing with grouting with same mortar, (To be secured to the backing by means of cramps where necessary), including rubbing, curing and polishing to edges to give high gloss finish etc. complete at all levels. Including fixing stone, over and above corresponding basic item, in facia, wall cladding and drops stucked with polymer based Chemical adhesive, including cleaning etc. complete. For all wall Caldding and Copping work as per drawing including all colour and texture. (Chemical adhesive brand: Laticrete Weber,Kerakoll)
Providing and fixing Engraved Polished Granite stone of 20-22 mm thk with Machine engraving/etching of alphabets/ map /diagram in flooring/wall vertically fixed upto 10m height in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings backing filled with 20 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with same including fixing the stone with polymer based Chemical adhesive for strenght. Etching of stone to be done by manually/machine directed as per architect. Sample to be approved with architect. all complete as specified and as directed by the Engineer-in-Charge. The stone work to be inclusive of rubbing, curing and polishing etc all complete: Colour Jet Black, Cherry Red, Steel grey, Elite Brown, Cat Eye or equivalent. (Brand for Adhesive: Laticrete Weber,Kerakoll)
Providing and laying Rajula stone flooring with Tactile floor pattern including making machine cut/engraving patterns in stone (for vision impaired persons as per standards) in 25 mm thk stone flooring with edge cutting in required sizes, design and patterns, in linear as well as curvilinear portions, conforming to IS: 15622 of approved make for outdoor rareas, laid over 25 mm (average) thick base and jointed with lime slurry, including rubbing and polishing complete with base of lime mortar 1:1:1 (1 lime :1surkhi:1 coarse sand) including wastage, cutting, curing, polishing etc all complete as specified and as directed by architectural drawings, Engineering- Charge in all shapes & patterns including grouting the joints. Laying and design of tiles as per IRC 103- 2012 guidelines.
Providing and laying Stainless Steel Tactile strips and studs (grade-316) (for vision impaired persons as per standards) conforming to IS: 15622 of approved for outdoor floors fixed over stone flooring in all shapes & patterns. fixing SS 316 studs of size 35mm x 25mm x 5 mm in floor and SS 316 strips of size 280mm x 35 mm x 5mm including screw fix or direct sticking on the floor to be installed with 4 tactile bars along the direction with correct spacing between each unit after 12mm drilled, cleaned, injected with epoxy glued floor laid over stone floor complete as per direction of Engineer-in-Charge. A sample to be made for approval as per design.
Sand faced lime plaster upto 10 m height above ground level with Lime plaster 1:1:1 (1 lime putty : 1 surkhi: 1 finesand), dashed over and including the fresh plaster in two layers,First coat will be in 12mm and second coat will be in 8 mm. Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in charge.Providing and applying lime plaster by Wetting the surface. Remove all the dust particles .Applying lime plaster up to required thickness .
Jikki Plaster upto 10 m height above ground level with Mortar in lime, surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5, in single layer of 6 mm. Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in charge.Providing and applying lime plaster by Wetting the surface. Remove all the dust particles. Applying plaster up to required thickness .
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for finishing with floating coat of neat cement slurry. Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.
Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
Wall painting (two coats) with plastic emulsion paint of approved brand having VOC (Volatile Organic Compound) content and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.( make Asian, Berger, Dulex, Nerolac)
Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete ( make Asian, Berger, Dulex, Nerolac)
Providing material and labour for applying Epoxy based Paint for Metal works on new/ existing metal surface af including including cleaning and removal of all dirt, grease, varnish, paint or any other foreign matter. Hereafter surface sanding before and after the paint to provide seamless aesthetic look complete as per the instructions with proper tools and sanding and wire brushing. First application of 2 coast of epoxy based primer (Epoxy Zinc Phosphate primer) paint to be applied and there after application of putty works and sanding work, thereafter application of 2 coats of epoxy base paint finish. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scafolding. (Brands: Asian paint Apcolite Epoxy, Berger, Dulex, Nerolac)
Providing and applying Hot dip Galvanised coating confirming to Indian Standard 4579/2629/2633 with zinc coating thickness to be 86 micron and before application of GI coating the material should be free from all dirt, grease, varnish, paint or any other foreign matter. Including touching of local exposed areas with Zinc metal spray paint with 2 coats to make the structure corrosion free with cleaning thoroughly the applied surface making it free from grease, paint or any other foreign matter , sanding the surface before and after the paint to provide seamless aestheic look complete as per the instructions of the EIC including transport/loading/unloading the materials at plant for HDGC work
Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
Demolition and disposal of unserviceable materials with all leads and lift. (ii) unreinforced cement concrete / Pavements / rubble
Dismantling tiled of stone floors laid in lime/ cement mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. Also for cobble stone floor, paver blocks, chinamosaic floor, tile dedo, etc.
Demolition including stacking of serviceable material and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work/Road works
Providing material and labour for Demolition of Brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Also for dismentaling of bella stone masonry and WBM/rubble solling in road.
Dismantling tiled of stone floors laid in lime/ cement mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. Also for cobble stone floor, paver blocks, chinamosaic floor, tile dedo, etc. (For thickness of tiles 10 mm to 25 mm) Also for cobble stone floor, paver blocks, chinamosaic floor, tile dedo, etc.
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.
Dismantling steel work including distempering and stacking the materials with all lead and lift.
Dismentalings manglore of country tile roofing with battens boarding etc. including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing.
Removal of telephone / Electric poles and lines including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to all lead and lift and stacking the serviceable and unserviceable material separately
Suppliying, laying and spreading of graded stone aggregate of following sizes (3) Crushed stone aggregate for Hard Quality up to 63 mm size
Supplying, laying and spreading of screened cleaned pea gravel of following sizes) (ii) 12mm nominal size.
Supplying laying and spreading of hard murrum 50mm to 150mm size.
Bench Type 01: Providing and fixing machine cut Dhangadhra Sand Stone Bench lenght of around 1.75 mx 0.5m widht x 0.4m clear ht after foundation anchor as per drawing with expose equally flattened, polished and smooth finished top as per Architects choice including dressing, rubbing, rounded edges, wedge, tappering, cleaning etc. with cost of loading -unloading and placing in place.
Dustbin: Providing and fixing Stone Litter Bin of 60x60x98 cm (LxBxH) as per drawing. Each unit will have smooth finish, engrave lettering/designs and with top cover and draining facility as per design including providing SS inner dustbin, fixing, making grooves, cleaning surfaces, including cost of loading -unloading and placing in place.
Infomation-Inclined Signage:Providing and fixing machine cut signage made from local stone with natural rock cut edge on sides as per design. Signage slab of 100mm thick with 15mm machine cut stone as per drawing including engraving of stone slab for alphabets/ drawings/motifs/maps including inclined support. The signage to be anchored with foundation as per structural design including cost of making grooves, dressing, rubbing, rounded edges, wedge, tappering, cleaning etc. with cost of loading -unloading and placing in place.
Directional Signage:Providing and fixing machine cut signage made from local stone with natural rock cut edge on side as per design around 1.4 m clear height excluding below ground ht. of around 0.45m . Mounted on 100mm thick machine cut stone as per drawing including engraving of stone slab for alphabets/ drawings/motifs/maps. The signage to be anchored with foundation as per structural design including cost of making grooves, dressing, rubbing, rounded edges, wedge, tappering, cleaning etc. with cost of loading -unloading and placing in place.
Providing and laying Large Stone Boulders used in Landscape gardens of minimum size of 1.5 x1.5x 1 m. including carving for sculpture works, loading-unloading with crane, labour, dressing, rubbing, curing, cleaning etc. complete at all levels and heights as per the design, shapes and sizes provided by the Architect
Cleaning of earth and back filling with 150mm of garden soil with 25 mm of farmyard manure, mixing and levelling it as per required slopes. Grassing with dibbling method with the distance of 50x50mm, application of required pesticides and chemical fertiliser including surface dressing,fine dressing, supplying, stacking with maintaining it properly and weed free for 3 year.
Supplying & stacking good earth/ sludge / well decayed farm yard manure from thesource approved by the engineer in charge incl. screening, loading, unloading, spreading, mixing, conveyance, filling, leveling and stacking at site.
Description : Trees: Providing and planting with including cost of the tree, excavation of 0.6x0.6x0.6 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti termite treatment. Planting of 2 m height and min. 20 cm girth healthy saplings with required stacking and maintaining it for 3 year. Items as below - Bismarckia Palm
Azadirachta indica ( Neem ) ( Description As Above )
Bauhinia blakeana (Kachnar) ( Description As Above )
Ficus elastica Decora (Rubber) ( Description As Above )
Plumeria alba ( Description As Above )
Description : Shrubs: Providing and planting with including cost of the shrubs, excavation of 0.3x0.3x0.3/0.5x0.5x0.5 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. Items as below - Ficus Long Island topiary
Ficus Nuda topiary ( Description As Above )
Alternanthera species ( Description As Above )
Clerodendrum inerme ( Description As Above )
Daniella variegated ( Description As Above )
Duranta Golden ( Description As Above )
Schefflera green ( Description As Above )
Cestrum nocturnum ( Description As Above )
Ficus panda ( Description As Above )
Murraya exotica ( Description As Above )
Nerium oleander (kaner) ( Description As Above )
Chamaedorea elegans palm ( Description As Above )
Dracaena Marginata ( Description As Above )
Raphis palm ( Description As Above )
Providing, Fixing, installation and testing in position European water closet comprising of :- Wall hung European W.C. Pan in white colour, on approved type of chairs. Open flushing cistern as directed with health faucet with required length of flexible tube, clamp and bracket for fixing to wall 1 Nos. 15 mm C.P. brass heavy quality angle stop cocks - For health faucet & Flushing Cistern with 450/600mm long CP braided hoses with 1 Nos. 15mm nuts & rubber washers with nipples. Solid Bakelite water closet cover and seat with C.P. hinges and rubber buffers. Fixing W.C. unit with brackets and accessories in position. Necessary pipe connection to UPVC soil pipe.Painting bracket with two coats of white enamel paint over a coat of primer, WC, seat & cover, brackets, flushing cistern, jet spray / health faucet, angle stop cocks supplied by bidder. All other materials and labour to complete the work by contractor. Including, providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia PVC pipe of required length and proper connection to PVC pipe complete as required. (Make: Hind ware/cera/jaguar)
Providing and fixing water closet squatting pan (Indian W.C. Pan ) size 580mm earth work ,bed,concrete foot rest and trap to be measured and paid for separately (A) Vitreous China.(I) Long Pattern-white colour and 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enameled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour, and 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. and G.I. inlet connection for flush pipe with W.C. Pan (Make: Hindware/cera/jaguar/Grohe)
Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including setting holes and making good the same but excluding fittings. (A) Vitreous China: (ii) Flat Back wash basin 550 mm x v 400 mm size. (i) In white colour. (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.(Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.(Make: Modi)
Providing and fixing toilet paper holder.(A) C.P. Brass (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing screw down 2-way bib cock of following size. Brass chromium plated 2-way bib cock (i) 15 mm.(Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing Urinal or approved quality including connecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.(Make: Hind ware/cera/jaguar/Grohe)
Concealed Urinal sensor: Supply and installation of sensotronic concealed type Flushing Valve for urinal complete set with installation box with control cock including all consumable, tools, tackles, labour etc all complete as directed by the Bank. (Make: Kohler, Jaquar, Hindware, Parryware or Equivalent)
Providing and fixing Angle tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink etc.) of approved make and conforming to Manufacturers Standards.
Supply, storing, installation and testing towel ring, with concealed type brackets fixed, to the wall, with CP brass screws, etc. complete. (Make: Hind ware/cera/jaguar/Grohe)
Supply, storing, installation and testing liquid soap dispenser with CP / SS cap and bracket, fixed to wall with CP brass screw, etc. complete. (Make: Hind ware/cera/jaguar/Grohe)
Supply, storing, installation and testing twin coat hook, fixed to wall / door with concealed CP screws etc. complete. (Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing screw down bib cock of following size. Brass chromium plated bib cock (i) 15 mm.(Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.(Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.(Make: Hind ware/cera/jaguar/Grohe)
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.(Make:prince/ supreme / astral / finolex)
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[B] 20 mm. (Make:prince/ supreme / astral / finolex)
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[C] 25 mm. (Make:prince/ supreme / astral / finolex)
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[D] 32 mm. (Make:prince/ supreme / astral / finolex)
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[E] 40 mm. (Make:prince/ supreme / astral / finolex)
Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 25 mm dia single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: (Make:ZOLOTO/VTC/SANT)
Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 32mm dia single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: (Make:ZOLOTO/VTC/SANT)
Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 40 mm dia single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: (Make:ZOLOTO/VTC/SANT)
Providing and fixing in position of approved quality G.M. float valve with copper ball float and brass rods of required length suitable for test pressure of 5Kg/sq.cm of the following sizes: [A] 25 mm
Providing erecting and fixing double coated Syntex or equivalent PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. (Make: Sintex / Kaka )
Preparing structural design of RCC Under Ground / Partially under ground /Septic tank/ above high ground level Reservoir and constructing of required capacity as per relevant I.S. standards in M30 concrete grade with HYSD Fe 500D reinforcement and constructing the same, including excavation in all types of soil strata (including rock) including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over inside container (i.e. walls, base, top slab/dome bottom etc. all). Including Soil testing. Including all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge.
Providing, laying and jointing in true line and level 32mm diameter U.P.V.C 10kg/cm2 conforming to IS 4985-2002 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(make : PRINCE / SUPREME / ASTRAL / FINOLEX)
Providing, laying and jointing in true line and level 40mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
Providing and fixing PVC SWR Nahni trap IS 14735 for drain -100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. (Make: prince/ supreme / astral / finolex)
Providing, fixing and testing unplasticised PVC Deep seal Floor drain/ MFT (110mm x 80mm) as per IS 14735 self cleansing design with arm with provision for connection PVC inlet fitting, including with jali complete. including cost of cutting and making good the walls and floors wherever required. (Make: prince/ supreme / astral / finolex)
Providing, laying and jointing in true line and level 110 diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
Providing, laying, jointing and testing SN8 Foam core/ Rex under 150 mm diameter ground drainage pipes approved make laid to required alignment and slope with joints in C.M. 1:1 (fine sand) in pipe trenches incl. excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 50 meters as directed incl. cement concrete bedding 1:3:6, 150mm thick. (depth up to 1000 mm to invert). (Make: Ashirvad / Astral / D-Rex )
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type (make-Local )
Constructing brick masonry chamber for underground Valve chamber and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 600mm x 600 mm and 600mm deep for pipe line with one or two inlets. (more than 10 ton)
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 800mm and 0.6M. deep including C.I. cover with frame size 455 x 610 mm total weight of cover and frame to be not less than 38 kgs. (Wt. of cover 23 Kg. and Wt. of frame 15 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand), for 150mm diameter sewer.
Providing and fixing, best Indian make 1st quality, PVC Sewer (intercepting) trap, of 150 mm. x 150 mm. size with cleaning eye cap and metal stopper chain, set in CC 1:2:4 etc., complete in last manhole including vent / fresh air pipe.
Providing and fixing cast iron steps of size 250mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.
Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
Providing and fixing rain water "KHURRAS" size 450 x 450 mm required depth with lead flashing around rainwater pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen. Including heavy duty CI grating complete as required.
Providing and fixing, PVC cowl, 75mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete.
(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (up to 10 ton)
C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )(Local Make)
Providing and fixing cast iron steps of size 250mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.
Providing, laying & jointing in position PVC/ HDPE 90mm diameter pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,
Providing, laying & jointing in position PVC/ HDPE 75mm diameter pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,
Providing, laying & jointing in position PVC/ HDPE 63mm diameter pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,
Providing, laying & jointing in position PVC/ HDPE 50mm diameter pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,
Providing, laying & jointing in position PVC/ HDPE 40mm diameter pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,
Providing & fixing of PGP ULTRA, Pop-up ROTOR sprinkler having variable adjustable arc (50 to 360 degrees)nozzle capable of covering 4.9m -14.0 m at 2.5 Bars with discharge rate of 0.02- 0.891Lps.The Rotor body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic with small exposed cover.
Providing & Fixing of SJ- 712, 3/4" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic complate with all necessary fittings and connection etc
Providing and fixing of PP service saddle of varying size.3/4' complate with all necessary fittings and connection etc.
Providing & fixing of Rotatory Pop up having colour coded MP Rotator nozzle with multiple stream water spray capable of covering 2.5m- 10.7m with Matched Precipitation Rate .The Spray Head body shall be constructed of heavy-duty, ultraviolet resistant plastic and stainless steel spring with mutifunctional wiper seal with small exposed cover complate with all necessary fittings and connection etc.
Providing & fixing of PS- Ultra, Pop up spray head bodies, having features an encased plastic 'cage' to provide unmatched resistance to grit,with high efficiency ADJUSTABLE nozzle capable of covering 1.2M -5.2m at 1.0 - 2.1 Bars, pressur. Additionally Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic complate with all necessary fittings and connection etc.
Providing & Fixing of SJ- 512, 1/2" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic complate with all necessary fittings and connection etc.
Providing and fixing of PP service saddle of varying size.1/2' complate with all necessary fittings and connection etc.
Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. complate with all necessary fittings and connection etc.( Plain Dripline 16 mm 50 cm 3.8 lph inline lateral)
Supply and Fixing Rod Comes Pre -Bent or plastic lateral stack to Staple Distribution Tubing , Drip Line to Finished Grade complate with all necessary fittings and connection etc.
Providing and fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of size 63mm complate with all necessary fittings and connection etc.
Providing & fixing of Isolation Valve in mainline for bypass and flow diversion of approved quality complate with all necessary fittings and connection etc.
Providing & fixing of a double acting 1" brass Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly complate with all necessary fittings and connection etc.
Providing & fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout complate with all necessary fittings and connection etc.
Providing & fixing of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout complate with all necessary fittings and connection etc.
Providing & fixing of Brass Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly complate with all necessary fittings and connection etc.
Providing & fixing of Brass Key threads into top of Quick coupling valve to provide water access And Brass Swivel Elbow complate with all necessary fittings and connection etc.
Providing & Fixing of DISC FILTER- with capacity matching pump design flow having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working presure of 10 Bars. with pressure gauge complate with all necessary fittings and connection etc.
Providing & Fixing of (Monoblock/Openwell submersible) pumpset of having discharge 6.1 lps@46 mtr head . suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, complate with all necessary fittings and connection etc.
Providing and fixing of control panel suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, complate with all necessary fittings and connection etc.
Providing & Fixing of ,Gelvenised Iron Suction ,Delivery & Header Pipe complate with all necessary fittings and connection etc.
Providing & fixing of control cast iron Valve /Butterfly Valve in mainline for bypass and flow diversion of approved quality 2.5" complate with all necessary fittings and connection etc.
Providing & fixing of brass/S.S Non Return Valve to prevent back flow 2.5" complate with all necessary fittings and connection etc.
Providing and fixing of brass Pressure Release Valve 2" complate with all necessary fittings and connection etc.
C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )(Local Make)
Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 50 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)
Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 65 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)
Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 80 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)
Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 100 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)
Providing and fixing, 15 mm. dia. GI hydrant, for gardening, at required distance, with 15 mm. dia. ball valve of approved make, as recommended or equivalent and GI pipe piece to provide the hydrant, 300 mm. above dressed ground level, including excavation and all supporting fittings, making connections with main lines, specials, if required etc. complete with note board "NO DRINKING WATER", as directed.
Providing and fixing in position of approved quality brass float valve with plastic ball float and brass rods of required length suitable for test pressure of 5Kg/sq.cm of the following sizes: [A] 25 mm
Supply and fixing of Direct burial 14 AWG x 2C cable for two way communication between controller and decoders complate with all necessary fittings and connection etc.
Providing and fixing in position of approved quality 32 mm diameter PVC conduit Pipe complate with all necessary fittings and connection etc.
Supply and fixing of I-Core: Commercial controller with outdoor with dual: Decoder system for I-core controllers ,230/240 VAC internal transformer control system , cycle +soak, Raindelay, Solarsync Mini weather station, controlling upto 1 master valve with diagnostic feature in wire shorttest ,voltage test at stations, standard accessories complate with all necessary fittings and connection etc.
Supply and fixing of Dual-1 1-station decoder for use with I-core dual controller complate with all necessary fittings and connection etc.
Supply and fixing of Dual-S surge suppression module for use with I-core dual controller complate with all necessary fittings and connection etc.
Supply and fixing of 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator complate with all necessary fittings and connection etc.
Supply and fixing of 1.5" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator complate with all necessary fittings and connection etc.
Supply and fixing of direct bury -on wire connector with strain relief , with waterproof silicon sealant complate with all necessary fittings and connection etc.
Supply and fixing of copper grounding rod, clamps, charcoal and complate with all necessary fittings and connection etc.
Supply and fixing of Pump relay 24 AC PLA relay complate with all necessary fittings and connection etc.
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 35 Ltr. S.S. Pressure Tank
Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories
Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat-III
Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
[III] For 20A Plug with 2-4 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (b) 25 mm
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (a) 2 wire 1.5 sq. Mm
(c) 2 wire 2.5 sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) with medium class Rigid PVC pipe and accessories. (a). 2 wire 4 sq. mm
(e) 3 wire 6 sq. mm
Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. e).RG-11
Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm. (a) Unarmoured. 4) Five Pairs
Supplying & erecting approved make LAN cable of following size in existing pipe as per direction. Cat-6e
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat-III
Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity. (A) 6-32 Amp. Cat-III
Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (A) 6-32 Amp. Cat-III
(b)40 Amp. Cat-III
Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (a) upto 40 Amp. Cat-III
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) . (F) Single phase 8 way SS Double door
(M) Three phase 8 way single door for single phase outgoing horizontal box
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. (I) 25 Amps.DP -CAT-III
(ii) 40Amps. DP - Cat-III
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40Amps. FP. Cat-III
Providing and erecting metallic vetrified danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S
Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB/ ACB/ Transformer LT pannel board, Motors etc. using copper clamp.
Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.
Providing and erecting HOT deep Galvanised strip iron wire 8 to 16 S.W.G.
Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [A] For electrical installation up to 440 V. Length of Pipe - 1 Mtr. Back filling compound - 1 Nos. of Bag of 15 Kgs.
[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -Back filling Compound :1 no. Bag of 25 Kg.
[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use. (i) with 350mm depth
Steel cover as per drawing using 16 SWG M.S.sheet of following depth, to house the switch gear etc. complete with locking arrangement and lock with duplicate keys per cupboard and door handles erected with necessary support and painting. [One coat red oxide and two coat enamel paint]. (A) with angle iron frame. (i) For 25 cms. Depth
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.
Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware materials as per requirement design with finishing by three tank powder coating processed inside and outside painted, erected as directed including minor civil work.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (B) 3 core 4 Sq. mm
(C) 3 core 6 Sq. mm
(C) 3 core 10 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
(C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
(F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (b) 4 core 6 Sq. Mm
(c) 4 core 10 Sq. mm
(d) 4 core 16 Sq. mm
(e) 4 core 25 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A) 4 core 2.5 Sq. mm
(A-1) 4 core 4 Sq. mm
(B) 4 core 6 Sq. mm
Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.
Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.
(B) If additional machineries like hammer driller or JCB use [Add]
Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)
Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (B) 50 mm dia
(C) 80 mm dia.
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. (A) 250 mm dia
(C) 100 mm dia.
Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per original. (A)50 mm dia
(B)90 mm dia
(C) 120 mm dia
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 2 to 4 core 6 Sq. Mm
(d) 2 to 4 core 10 Sq. mm
(e) 2 to 4 core 16 Sq. mm
(f) 2 to 4 core 25 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. Mm
(C) 3 & 1/2 core 70 Sq. mm
(F) 3 & 1/2 core 150 Sq. mm
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm
(B) 10 Sq.mm.
(C) 16 Sq.mm.
(D) 25 Sq.mm.
(E) 35/50 Sq.mm.
(F) 70 Sq.mm.
(I) 150 Sq.mm.
Providing and fixing approved make Perforated C type cable tray. Made from CR sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (2) 100 X 50 X 1.5 mm Thick
(3) 150 X 50 X 1.5 mm Thick
(5) 300 X 50 X 1.5 mm Thick
(7) 600 X 50 X 1.5 mm Thick
Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. OF FOLLOWING SIZE. (2) 100 X 50 X 1.5 mm Thick
(3) 150 X 50 X 1.5 mm Thick
(5) 300 X 50 X 1.5 mm Thick
(7) 600 X 50 X 1.5 mm Thick
Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (2) 100 X 50 X 1.5 mm Thick
(3) 150 X 50 X 1.5 mm Thick
(5) 300 X 50 X 1.5 mm Thick
(7) 600 X 50 X 1.5 mm Thick
Providing and fixing approved make 'Cross over Junction' for Perforated C type cable tray. Made from CR sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (2) 100 X 50 X 1.5 mm Thick
(3) 150 X 50 X 1.5 mm Thick
(5) 300 X 50 X 1.5 mm Thick
(7) 600 X 50 X 1.5 mm Thick
Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.
Providing & erecting approved make street light / wall mounting junction box compression moulded from DMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. [C] 327mm x 254mm x 120 mm
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates). (B) Flood Light (IP-65), Surge -4KV. (d) above 100 to 120 watts. Cat-III
(e) above 150 to 240 watts. Cat-III
SITC of IP65 24W LED Wall Light type light fixture including all required accessories with following specifications. Luminaire made up of die cast alluminium, Powder coated, Difuser must be of translucent, UV stabilised, non-yellowing polycarbonate. ting feature for desired angle. Life time must be more than 30,000hr. Fixure warranty must be 3 years minimum. Make: Ligman, Kesselec Schreder, Uniled, K-Lite, Simes, Havell's
SITC of 20W LED round panel type indoor ceiling light fixture with following specifications. IP20. 4000K. Approved body colour. All required accessories and connections. Make: K-lite, Ligman, Kesselec Schreder, Havell's, Bajaj, Wipro. Minimum 3 years of warranty.
SITC of IP54, 20W LED round panel/down light type outdoor ceiling light fixture with following specifications. 4000K. Approved body colour. All required accessories and connections. Make: K-lite, Ligman, Kesselec Schreder, Havell's, Bajaj, Wipro. Minimum 3 years of warranty.
SITC of 2Ft. LED (4000K) Batten with all required accessories and connections. Make: Havell's, Wipro, K-lite, Changi, Hybec. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Make: K-lite, Ligman, Kesselec Schreder, Havell's, Bajaj, Wipro. Fixture warranty must be 3 years minimum.
SITC of 25A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve inside the existing panel board / distribution board / junction box with all required fixing accessories. Make: Havell's, Legrand, Schneider, Siemens
Supply, erection, testing and commissioning of Panels of below ratings as per IS Specifications and respective drawings. The unit rate for each item shall include : Call for final inspection prior to dispatch. Delivery of the panels to site. Shifting of the panels from site store to the suitable location. Fixing of Shipping Section. Assembly and wiring of component supplied separately. including removing packing. Installation of panel to Mechanical Plant Room / Electric Room. Earthing all components, frame etc. to a common internal earth bar. M.S. parts should be painted with powder coating. Supply & Fixing all accessories and supporting structure. Supply & Fixing of M.. 100 mm. channels for fixing the panels. Connection, Testing & Commissioning Checking of Internal connection and wiring, operation of switches, starter, TPN MCCB, relays, contractors etc. Supply of necessary tools, hardware, mounting with necessary civil masonary works etc. Electrical Contractor shall carry out the insulation test at site and all the observations shall be recoreded and submitted in duplicate to the consultant or engineer - in - charge. The rate shall include the civil foundation as approved by site enginner. Make: Schnieder, Siemense, L&T, IndoAsian. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution. Outdoor Panel Type- 1. Incomer : 630A, TPN Microprocessor Based 36KA, MCCB Incomer. Busbar Size : 630A TPN, 415V,3-Phase 15KA Al. Busbar. RYB Indicating Lamp- 4 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 630/5A 3 NOS (for Measuring Current) with ASS & Ammeter. CT 630/5A 3 NOS (for APFC Relay). Electrical & Mechanical Interlocking between Incomers & Buscoupler & Capacitor Bank Feeder. Buscoupler : 630A, TPN Microprocessor Based 36KA, MCCB Incomer. Outgoings : 125A, TPN Microprocessor Based 36KA, MCCB Incomer - 3 Nos. 100A, TPN Microprocessor Based 15KA, MCCB Incomer - 3 Nos. 100A, TPN Microprocessor Based 15KA, MCCB Incomer - 3 Nos.
SITC of outdoor Panel Type-2 as per above specifications. INCOMING: 1 No. 125 Amp. FP MCCB. 1 No. 125 Amp. FP Contactor with 24 Hours Timer. 3 Nos. Control Fuse and R, Y, B Phase Indicating Lamp. BUSBAR : 125 Amp. 415 V, TPN Al. Conductor. OUTGOING : 4 Nos. 32 Amp-63Amp. TPN MCB. 12 Nos. 6-25 Amp. TPMCB.
SITC of outdoor Panel Type-3 as per above specifications. INCOMING: 1 No. 100 Amp. FP MCCB. 1 No. 100 Amp. FP Contactor with 24 Hours Timer. 3 Nos. Control Fuse and R, Y, B Phase Indicating Lamp. BUSBAR : 100 Amp. 415 V, TPN Al. Conductor. OUTGOING : 4 Nos. 32 Amp-63Amp. TPN MCB. 8 Nos. 6-25 Amp. TPMCB.
SITC of 10W LED around 150 Wd. x 250-300mm Ht. GFR Concrete Bollard/wall casted light fixture with stone cladding.as per following specifications. Light fixture specification: IP65, IK06, 2 housings in polypropylene with locking system + ligting element with 1 COB LED 3000K CRI80 800lm. Rated luminaire luminous flux 612lm. Rated input power flux 7,6W, 220V-240V AC 50/60Hz/DC. Including External Dali Driver. Light fitting must be fitted on site while casting the concrete. Fixture is composed of two elements: the housing and the lighting element. The housing is in polypropylene and it consists of two complementary parts: - A jig , which forms the housing, and is extracted together with the retaining panel after completing the casting and removing the anchor screws; - The housing that remains embedded inside the casting and houses the lighting element. The lighting element in die cast aluminum is anchored to the casing through proper screws and it remains completely hided into the void. LUMINAIRE Housing finish with concrete to be built on site. Supplied with a pre-wired 0.3m H05RN-F cable. Isolation: CLASS I . This luminaire is manufactured on site during the concrete casting of the wall with hand crafted procedures;where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C. The Glass Fibre Reinforced Concrete Bollard/wall varies in size as per the condition and casted as single cast mono pignmented colour as needed element with High performance GFRC wall of 40 MPa Comressive Strength, UV Resistant stabilise colour including fixing, cleaning surfaces and complete installation. Make: Simes, Erco, Zumtobel
SITC of IP65, IK06, 800mm height, 100mm dia 15W LED bollard with all required accessories and fitting with RCC base of required depth. Material must be Alluminium die cast, High corrosion resistant, micro etched prismatic glass difuser, Stainless steel screws, Pre-wired luminaire with neoprene cable and connector, Silicon gasket, Double powder paint of Dark Grey. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP65, IK06, 30W Post Top fitting with 3.0 mtr, 60mm dia Pole including base plate with all required accessories and fitting with RCC base of required depth. Specification:1 MODULES LED 3000K 230V 3360lm CRI 90 MacAdam step 3 Rated luminaire luminous flux: 2059lm. Rated input power: 28.2W. Luminaire efficacy: 73lm/W. Electronic ballast 220÷240V AC 50-60Hz / DC. MATERIAL CHARACTERISTICS: Aluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process. 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06. LIGHTING PERFORMANCE: The light distribution is in accordance with light pollution regulations. Toughened glass. LOR. POLE CONNECTION: Pole head in painted aluminium with Ø 60 mm connection (Pole not included). WIRING: Supply 0.5m cable section type H07RN-F . Single cable entry sealed with B component epoxy resin, wired internally protected by silicon sheaths. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 1 Kg Glow Wire test: L.E.D circuit included. This luminaire contains built-in LED modules with energy class: . In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012). LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C. Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded. Make: Simes, Erco, Zumtobel
SITC of IP67, IK09, 20W, 3000K Ground Burial type asymmetrical light fitting with all required accessories and fitting with RCC base of required depth.Make: Simes, Erco, Zumtobel. S.1915W Specification: 9 MODULES LED 3000K 700mA 1755lm CRI 90 MacAdam step 3.Rated luminaire luminous flux: 1499lm. Rated input power: 20.2W. Luminaire efficacy: 74lm/W. Requires remote power supply. IP 65 IP67. MATERIAL CHARACTERISTICS: Die cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance.. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity. LIGHTING ERFORMANCE: Clear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp fixed position. LOR. LOW SURFACE TEMPERATURE: Surface temperature of glass -- (Ta 25°C) INSTALLATION AND MAINTENANCE: A4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground. WIRING: Supply 5m cable section type H07RN-F sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 1.8 Kg Glow Wire test:L.E.D circuit included. This luminaire contains built-in LED modules with energy class: . In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012). LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours
SITC of IP67, IK09, 20W, 3000K Ground Burial type symmetrical light fitting with all required accessories and fitting with RCC base of required depth. Material must be Alluminium die cast, High corrosion resistant, Touhgned glass, 8mm thick overall, Clear polycarbonate lenses, A4 stainless steel fixing clips, Insultating nylon fixing plate for direct ground surface mount, double powder paint of Alluminium grey, unit supplied with 6m cable. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP67, IK09, 9W, 3000K Ground Burial type asymmetrical light fitting with all required accessories and fitting with RCC base of required depth. Specification: 4 MODULES LED 3000K 700mA 780lm CRI 90 MacAdam step 3. Rated luminaire luminous flux: 653lm. Rated input power: 9W. Luminaire efficacy: 73lm/W. IP 65 IP67. MATERIAL CHARACTERISTICS: Die cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity. LIGHTING PERFORMANCE: Clear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp fixed position. LOR. LOW SURFACE TEMPERATURE: Surface temperature of glass -- (Ta 25°C). INSTALLATION AND MAINTENANCE: A4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground. WIRING: Supply 5m cable section type H07RN-F sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 1.2 Kg Glow Wire test:L.E.D circuit included. This luminaire contains built-in LED modules with energy class: . In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012). LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C. Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded. Make: Simes, Erco, Zumtobel
SITC of IP65, IK07, 74W, 3000K Linear Wall Washer type Light Fixture with all required accessories and fitting. Specification: MODULES LED 3000K 230V 7920lm CRI 90 MacAdam step 3. Rated luminaire. Luminous flux: 5235lm. Rated input power: 74W. Luminaire efficacy: 71lm/W. Electronic ballast 220÷240V AC 50-60Hz / DC. Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process. 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07 Maximum load capacity. LIGHTING PERFORMANCE Clear toughened glass diffuser. LOR --. Compact electronic ballast to guarantee better lamp stability, lifetime and reduced energy consumption. The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. WIRING: Ministreamline Projector supplied 1m cable section type H05RN-F sealed with B component epoxy resin, wired internally protected by silicon sheaths. Streamline Projector suitable for single cable gland. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 6.9 Kg Glow Wire test:L.E.D circuit included. This luminaire contains built-in LED modules with energy class: . In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012). LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C. Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded. Make: Simes, Erco, Zumtobel
SITC of IP65, IK07, 10W, 3000K Surface Mounted Uplighter type Light Fixture with all required accessories and fitting. Material must be Alluminium die cast, High corrosion resistant, Clear touhgned glass diffuser, Stainless steel screws, Silicon gasket, Double powder paint of Alluminium grey, unit supplied with 1m cable, with double canle entry and cable glands. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP65, IK07, 2W, 3000K Ground Burial type Light Fixture with all required accessories and fitting. Material must be Alluminium die cast, High corrosion resistant, Clear touhgned glass diffuser, Stainless steel screws, Silicon gasket, Double powder paint of Alluminium grey, unit supplied with 1m cable, with double canle entry and cable glands. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP65, IK07, 11W, 3000K Surface Mounted Uplighter type Light Fixture with all required accessories and fitting. Material must be Alluminium die cast, High corrosion resistant, Clear touhgned glass diffuser, Stainless steel screws, Silicon gasket, Double powder paint of Alluminium grey, unit supplied with 1m cable, with double canle entry and cable glands. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP66, IK06, 84W, 3000K asymmetrical LED Flood Light Fixture with all required accessories and fitting. Material must be Alluminium die cast, High corrosion resistant, 99.98% pure alluminium reflectors, or with concentrating or diffusing lenses, Stainless steel screws, Silicon gasket, Double powder paint of Alluminium grey, unit with double canle entry and cable glands. 3 Years of minimum warranty. Make: Simes, Erco, Zumtobel
SITC of IP66, weather proof & corrosion resistant 7 Mtr. High Decorative Pole of 100mm dia consisting of 4 nos. of 45W LED Light Fixtures IP65, each. with following specification. Mounted on 350(L)x350mm(W)x1200mm(D) RCC base in ground. Approved coloured and coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint. Built in control box with service door with safety lock and chain and with all necessary connection with suitable MCB. Make: SImes, K-lite, Ligman. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.
SITC of IP68, weather proof & corrosion resistant, IK08, 60W LED Flood type light fixture including all required fixing accessories and cable connections with minimum 3years of warranty. Make: Simes, K-Lite, Bajaj, Havell's
SITC of 4Ft. LED (4000K) Batten with all required accessories and connections. Make: Havell's, Wipro, K-lite, Changi, Hybec. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Make: K-lite, Ligman, Kesselec Schreder, Havell's, Bajaj, Wipro. Fixture warranty must be 3 years minimum.
SITC of 20/25mm wide weather and dust proof LED 4000K Rope light in profile casing patti with following specifications. IP65. Dot free and homogeneous light emission surface. Anti-UV. High light quality at a lifetime of >30000 hrs. Flexible bending radius for any shape with ease of installation. All required accessories and connections. Make: K-lite, Ligman, Kesselec Schreder, Havell's, Bajaj, Wipro. Minimum 3 years of warranty.
SITC of 250 KVA 11000/433 volts ONAN Plinth mounted outdoor type transformer with off Load Tap Changer. As per standard specification. Make: Voltamp, Essner, SKP, Crompton. The rate shall include the following : Supply of the transformer. Delivery of the transformer at site. Unloading of transformer at site. Shifting of transformer with all tools, equipment & accessories from site store to the site and placing it on the plinth at site. Earthing of transformer neutral & body. Charging of transformer gradually as per IS. 'Supply & fixing of set of suitable sized channel rail on transformer platform. Locking of transformer wheels on the rail. Loading of transformer gradually as per I.S.
Liaison fees for preparing necessary documents and drawings for getting N.O.C from Electricity Co. and Electrical Inspector for the installation of 11 KV / 0.433 KV Electrical L.T distribution sub stations. (All statutory fees will be paid by client)
SITC of IP66, 360 degree outdoor Camera with following specifications. 1/2 MOS image sensor. H.264/JPEG video codec supported. 9MP resolution. Wide dynamic. Colour-ICR and Auto Back Focus. 2-way Audio. Vandal resistant- IK10 . (IEC62262), IEC60068-2-75 (50J). Weather proof coated. Power source-POE, 12V DC. Smartphone application supported. Minimum 3 years of warranty. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
2 MP Dome IR Camera with 30 ft. length. 1080p resolution. Wide dynamic range. Triple streaming for maximum network efficiency. True day/night operation with ICR filter. H.264 & MJPEG video compressions. SD card slot for local video archiving. 2-way audio supported. Latest ONVIF complaint. Compatible with smartphone application. Minimum 3 years warranty. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
3 MP Bullet IR Camera, Vari Focal, IP66 Outdoor type. H.264 dual-stream encoding. 30fps @ 1080P. Built-in Micro SD/SDHC/SDXC card slot, upto 64GB. Day/Night IR cut filter. IR LED advertosed working distance 30mtr. Powered by POE. Compatible with smartphone application. Minimum 3 years warranty. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
16 Chhanel NVR. Third party network cameras supported. Upto 6MP resolution recording. HDMI & VGA output at upto 1920x1080P resolution. 16 network cameras can be connected with 80M incoming bandwidth. Supporting network detection, including network delay, packet loss etc. Simultaneous HDMI, VGA and CVBS output. Dual gigabit network interfaces. eSATA interface for recording or archiving. Digital zoom on live view and playback. Smart phone application supported. Minimum 3 years of warranty. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
SITC of 8 Chhanel NVR. Third party network cameras supported. Upto 6MP resolution recording. HDMI & VGA output at upto 1920x1080P resolution. 8 network cameras can be connected with 80M incoming bandwidth. Upto 2 SATA interfaces. Supporting network detection, including network delay, packet loss etc. Minimum 3 years of warranty. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
SITC of 4TB HDD. Make: WD
SITC of 6 TB Hard drive. MAKE: WD
SITC of 10 Ft. GI Pole with following specifications. 75mmdia including base plate with all fittings mounted on 150mm dia and 600mm deep RCC foundation. Approved coloured with weather proof coat. All required connections of cables.
8 Port POE Switch. With following specifications; 8x10/100 mbps RJ-45 posrts. 2 RJ-45 gigabit ethernet uplink ports. 2SFP gigabit ehternet fibre optical uplink ports. Power upto 8 POE Cameras. Rack mount compatible. LED's to provide status feedback. 7.2 gbps switching capacity. IEEE 802.3AF/AT complaint + UL listed. CSMA/CD complaint. Half duplex/Full duplex. Make: Dauhua, Hikvision, Panasonic, Honeywell, Samsung
SITC of 32" display with following specifications. Screen Size 32 Inches Screen Resolution-1366 x 768 Pixels. Display Quality-HD Ready. LED Lighting Type-Backlit. USB 2.0, HDMI, Ethernet ports. 1 x PC Audio In (Mini Jack), 1 x RF In (Terrestrial/Cable Input), 1 x (Common Use for PC Audio in) DVI Audio In (Mini Jack). 2 Built-in Speakers, Down Firing + Full Range. Wide colour enhancer. Minimum 3 years of warranty. MAKE: Samsung
SITC of 55" display with following specifications. Screen Size 32 Inches Screen Resolution-1366 x 768 Pixels. Display Quality-HD Ready. LED Lighting Type-Backlit. USB 2.0, HDMI, Ethernet ports. 1 x PC Audio In (Mini Jack), 1 x RF In (Terrestrial/Cable Input), 1 x (Common Use for PC Audio in) DVI Audio In (Mini Jack). 2 Built-in Speakers, Down Firing + Full Range. Wide colour enhancer. Minimum 3 years of warranty. MAKE: Samsung
SITC of 24 Port Layer- 2 Switch with following specifications. 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit SFP slots Console port. Auto medium dependent interface (MDI) and MDI crossover (MDI-X). Auto negotiate/manual setting. RPS port for connecting to redundant power supply unit. Switching capacity up to 48 Gbps, nonblocking. Forwarding rate upto 35.7 mpps. Built-in web user interface for easy browser-based configuration (HTTP/HTTPS). MAKE: D-link/TENDA
SITC of 4U Rack
Camera Box
Network DB
SITC of WIFI with Omni directional antenna with following specifications. VSWR-2:1 max over range. Nominal Impedance:50 ohms. Max. Power (continuous):100 watts Vertical Beamwidth (-3 dB point): as per requirement. Wind Load (flat plate equiv.): as per site condition Rated Wind Velocity: 120+ mph (193+kph) Operating Temp: -40o to +85o C Lightning Protection: External suggested OD Series Interface: N Jack (Female) Antenna Diameter: 1” (25 mm), main mast Material: Fiberglass radome with aluminum body Options: Reflector Option Kits. Pigtail Cable Option. Part 15 Reverse connectors. Wall Mount Bracket. Shock & Vibration:EN 300 019-2-4, IEC 60068 Water Ingress:IPx5. MAKE: Ubiquiti
SITC of IP65 Wifi Access point with following specifications. WiFi Standards IEEE 802.11 a/b/g/n/ac (Wave-2). WEP, WPA/WPA2-PSK, WPA/WPA2 Enterprise (TKIP/AES), anti-hacking secure boot and critical data/control lockdown via digital signatures, unique security certificate and random default password per device. Up to 984 ft. (300 meters). MAKE: Ubiquiti
SITC of Wifi supported POE Switch with following specifications. As per WiFi Standards IEEE 802.11 a/b/g/n/ac (Wave-2). Rack mount compatible. LED's to provide status feedback. 7.2 gbps switching capacity. IEEE 802.3AF/AT complaint + UL listed. CSMA/CD complaint. Half duplex/Full duplex. 2SFP gigabit ehternet fibre optical uplink ports. MAKE: AECONNECT
SITC of Computer System including 17" monitor. CPU with 8GB RAM, 2TB HDD, Memory graphic card, DVD writer, minimum 6 nos. USB ports, 2 nos. ethernet ports, HDMI, VGA ports. Keyboard. Mouse. Make: Dell, Lenovo, Toshiba
SITC of 24 core armoured optical fibre cable. Make: BTL
SITC of Media Converter (Pair). MAKE: DBC
SITC of Grandstream-4 Incoming Line SIP/IP Extension. MAKE: Grandstream
SITC of Grandstream IP Phone. MAKE: Grandstream
Installation & Configuration
TIRUPATI SARJAN LIMITED
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.97 MB
Tendernotice_2.pdf
PDF • 18.30 MB
BOQ_1468.xls
BOQ • 1.40 MB
Download all tender documents and submit your bid