COMPREHENSIVE MAINT INCL E/M TO OTM AND MD ACCN OF SATA BTY AT ITARANA AND CITY AREA UNDER AGE B/R-I ALWAR

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.

M&L for demolition of concrete (unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

Taking down Chowkatts or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame n. exc 1.5 sq. m each & removing to store.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises

Taking down cement plaster any description on brick or stone any description complete all as specified& directed by Engr-in-Charge.

Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.

Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

Dismantling/demolition water tanks of capacity n exc 500 ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Dismantling water tanks & removing to store exc 500 & n exc 1000 litres

Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engr-in-Charge.

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples or nails and screws complete all as specified and directed

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed tinned tacks or GI wire stampe or nails and screws/wooden beading complete all as specified & directed.

S&F Steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Sheet Glass, Grills, iron mongry and guard bars as shown on drg.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down.

S&F Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane 4 mm in thickness complete all as specified& directed by Engr-in-Charge.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

-do- as per item No 26- above but 3mm thick figured glass, pin head type.

Hacking out old broken glass from metal/aluminium frame incl punching or drilling out old glazing pins/springs/clips/ beading and providing & fixing new of any thickness/size of any description and S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed by Engr-in-Charge.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified.

M & L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.

M & L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.

S&F Butt hinges 100mm long medium weight, stainless steel complete all as specified& directed by Engr-in-Charge.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engr-in-Charge.

S&F 150mm 'D' type Aluminium handles, type, anodised complete all as specified & directed by Engr-in-Charge.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by Engr-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.

Material and labour for Machine cut kota stone slab flooring 18-20 mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for kota stone slab 18 -20 mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed.

S&F in repairs stainless steel rod of 20 mm inner dia (in lengths as directed) including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with rawl plug & steel screws on walls/beam, all as specified & as directed.

M&L 75 mm thick PCC(1:3:6) type C2(using 40mm graded stone aggregate ) as in plinth protection finished fair and even using extra cement for smooth finish complete all as specified& directed by Engr-in-Charge.

M&L Rendring 10mm thick in CM 1:6 on brick work / stone or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick work /stone or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.

Supply only Integral waterproofing compound

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

Material and labour for prepration over new surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as er IS 15489-2004 alkarili and fungal resistance, dirt resistance exterior paint emulsion of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and as directed

M & L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.

M & L for complete removal of old existing surfaces of walls, plastered or unplastered and applying two coats of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.

Material and labour for complete removal of existing treatment from stone wall /plastered wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as er IS 15489-2004 alkarili and fungal resistance, dirt resistance, exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm over 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

Material and labour preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for preparing newly plastered surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer on walls and inclucluding 1 mm thick Birla white wall care putty complete all as specified and directed by Engineer-in-Charge.

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr- in - Charge.

M & L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty. complete all as specified and as directed.

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed by Engr- in - Charge.

All as per description of serial item No.46.00 here-in-above but on ceiling surfaces

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.

S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I complete all as specified and directed.

S&F in repair ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge

S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed bore in dia 15mm complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash basin white of size 550x400 mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repair Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge.Make-Prayag/Cera/Hindware

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or E-250

S&F in repairs for bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe (Min. wt 90 gms) and complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs plastic water closet seat cover white /coloured closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified an directed.

S&F in repairs PVC flexable waste pipe 32/40 mm dia & approx 900 mm long with PVC waste coupling suitable for WHB, sink & urinal complete all as specified & directed.

Supply and replacement in repairs of brass spindles, phases of brass of any size required 3/4/5 for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

S& F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge.

S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified complete all as specified & directed

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, fixed in repairs, complete all as specified.

S&F in repairs Vitreous China urinals, half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as directed by the Engr-in-charge.

S&F in repairs.sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed

S/F in repair kitchen sink without draining board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including and fixing cast iron cantilever brackets and connecting union to pipe over all size 495x420 mm bowl size 410x330x160 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified & directed

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), complete all as specified & as directed.

S&F in repairs brass mortice lock, vertical type, size 65mm, 2 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

S&F in repairs MS helical door spring 300 mm size with roller & roller plate fixed to wooden or steel frames with Screws/welding as required at site complete all as specified.

S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as spd.

S&F in repairs Extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified.

S&F as in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

Supply and fixing in repairs butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.

Supply and fixing in repairs MS steel window stay 300 mm long for steel windows all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs handles for steel windows all as specified and directed by Engineer-in-Charge.

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) vent cowl 110mm complete all as specified & directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed.

Demolition Mud/PCC in roofs padding any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

M&L rendering laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified& directed by Engr-in-Charge.

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface including two coat of refelective silver aluminium paint over APP membrane complete all as specified.

Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required complete all as specified and directed.

S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.

S&F in repairs brass chromium plated shower rose 65mm size with swivel joint type including shower arm fixing to steel pipe of 15mm bore or union complete all as specified.

S & F in repair Plain 4mm mild steel wire in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), 25mm thick, as in floor complete all as specified & directed by Engr-in-Charge.

M&L non skid ceramic tiles 7 to 8mm thick(square/rectangular) colored tiles area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engr-in-Charge.

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredmatch over 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engr-In-Charge.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces as dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl 15mm thick cement screeding in CM 1:4.

M&L For False Ceiling Complete With Armgyp-FB ceiling Tiles of Size 595x595,9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) Suspended From Ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer's instruction,complete all as directed and specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engr-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for steel work in tubular section for post /truss/ purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240 complete all as specified and directed

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over screed bed 20 mm thick CM 1:6 cement concrete complete

M & L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering in CM 1:4 for recieving stone etccomplete all as specified and as directed

Rectifying the defects in LED/ fluroscent tube light fittings/wall security light fitting/flood light fittings/CFL fittings/Building security lights any type/capacity/any shape/position and at any height by tightening loose connections and rectifying defects and made serviceable including testing complete all as directed.

Opening switch mounting plate at normal height upto 1.5 mtr, rectifying the defects in fittings and fixtures such as switches, bell push, fan regulator, sockets etc by tightening loose connections, refixing switch plate and testing complete all as directed. NOTE for Item 121.00 & 1222.00: The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fitting and fixtures functional. If replacement of parts/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for under relevant items of this schedule hereinafter and in such cases the above items will not be measured and paid for.

Taking down carefully copper/Aluminium point wiring of light/fan/socket/power point and including existing/old conduits / PVC casing caping and making good disturbed surfaces of walls/ ceilings complete all as specified & directed.

M&L for point wiring for One light point controlled by one, one way switch in casing/caping with Two single core, PVC insulated ,unsheathed FRLS, multistranded copper conductor cable/wire of size 1.5 sqmm,1100 Volts grade along with one single core PVC insulated, unsheathed, FRLS with multistranded copper conductor cable/wire of size 1.5 sqmm 1100 volts grade as continuous earth wire, green in colour confirming to IS-694/1990 connected from fittings to common earth dolly in & including S&F PVC casing & caping/in concealed conduit of suitable size as directed with its accessories and also including S&F wooden switch boards fixed on wall and 3mm thick phenolic laminated sheet top cover for mounting of switches ,sockets, regulators etc. all as specified and directed by Eng-In Charge. Note : The quoted rates are included for cutting and chasing in walls, including making good to disturbed surfaces of concealed wiring.

All as per ser item No 124.00 but for One light point controlled by one, one way switch in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one fan point controlled by one switch and regulator in casing/caping.

All as per item No 124.00 here-in-before but for one fan point controlled by one switch and regulator in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one exhaust fan point controlled by one switch in casing/caping.

All as per item No 124.00 here-in-before but for one exhaust fan point controlled by one switch in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one bell/buzzer point controlled by one bell push in casing/caping.

All as per item No 124.00 here-in-before but for one bell/buzzer point controlled by one bell push in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one light point controlled by two, two way switches in casing/caping.

All as per item No 124.00 here-in-before but for one light point controlled by two, two way switches in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on same board.

All as per item No 124.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on independent board in casing/caping.

All as per item No 124.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on independent board in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one 3 pin 15 Amps socket outlet controlled by one 15 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade including 2.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade as continous earth wire in green colour confirming to IS-694/1990 in PVC casing/caping.

All as per item No 124.00 but in concealed pvc conduit.

All as per item No 124.00 here-in-before but for one power point on independent board with 4.00 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade including 4.00 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade as continous earth wire in green colour confirming to IS-694/1990 in PVC casing/caping.

All as per item No 124.00 but in concealed PVC conduit.

S&F switch piano flush type single pole one way 5 Amps 230 Volts .

S&F switch piano flush type single pole two way 5 Amps 230 Volts .

S&F switch piano flush type single pole one way 15 Amps 230 Volts .

S&F socket outlet for 2 & 3 pin 5 Amps flush type 230 Volt.

S&F socket outlet 2 in 1, 3 pin 5 and 15Amps flush type 230V.

S&F bell push flush type 5 Amps 230 Volt.

S&F bell Ding Dong Music type AC 230 volts single pole.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for angle fittings.

S&F ceiling rose surface bakelite 65/30 mm three terminals.

S&F new fan regulator electronic stepped up type piano socket type flush type and connecting up, ISI marked 120 Watts, 230 Volts.

S&F switch piano flush type single pole one way 5/6 Amps 230 Volts Modular type.

S&F switch piano flush type single pole one way 15/16 Amps 230Volts Modular type .

S&F socket outlet for 2 & 3 pin 5 Amps flush type 230 Volt Modular type.

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps flush type 230 V Modular type.

S&F PVC Modular white cover plate with base frame,2 module.

S&F PVC Modular white cover plate with base frame plate 3 module.

S&F PVC Modular white cover plate with base frame plate 4 module.

S&F PVC Modular white cover plate with base frame plate 6 module.

S&F PVC Modular white cover plate with base frame plate 8 module.

S&F new fan regulator electronic stepped up type piano socket type flush type and connecting up ,ISI marked 120 Watts, 230 Volts,modular type ,2 module.

S&F decorative ultra slim liner LED lighting fixture with extended polycarbonate 20 Watt with LED tube and connecting up with and including white coloured round three core ,PVC insulated ,sheathed copper conductor cable of required size and length from ceiling rose to fitting and as directed .Make -Havells or equivalent of Phillips,CG,Bajaj including dismantling of old FTL fittings.

S&F decorative ultra slim square box profile liner LED lighting fixture with extended polycorbonate ,environmental friendly ,energy efficient all including LED tube 9 watt,6000K to 6500K of Model ELITE LED PRIDE and connecting up with and including white coloured flat/round twin core PVC insulated, PVC sheathed copper conductor cable of required size and length, from light fitting to ceiling rose specified & directed. Make;-Havells Cat Part No.LHEXBLP7IN1W009 or equivalent of Phillips /CG/Bajaj

Fixing only any type and any size LED light fitting on wall / ceiling including S/F white coloured round three core ,PVC insulated ,sheathed copper cable of required size and length from ceiling rose to fitting complete with all standard fitting .

S&F sheet metal enclosure double door type suitable for fixing MCB's, TPN 4 way, 415 Volts and including taking down old U/S DB ,TPN,4 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB ,TPN, 4/8 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 230 Volts and including taking down old U/S DB ,SPN,8 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts and including taking down old U/S DB ,SPN 4way complete all as specified & directed.

S&F sheet metal enclosure single door type suitable for fixing MCB's, SPN without busbar 2 way, 230 Volts and including taking down old U/S DB ,SPN 2way complete all a specified & directed.

S&F MCB 32 Amp, single pole & neutral, 230 Volt & including taking down old U/S MCB complete all a specified & directed.

S&F MCB 6 to 32 Amp, single pole 230 Volt & including taking down old U/S MCB complete all a specified & directed.

S&F MCB 32 to 63 Amp, triple pole & neutral, 415 Volt & including taking down old U/S MCB complete all as specified & directed.

S&F 2nd class H/W rectangular block open recessed of size 45 x30 X 5 cm depth fixed with suitable screws & PVC rawl plug (4 Nos) for DB complete all as specified and directed.

S&F 2nd class H/W rectangular block open recessed of size 30 x25 X 5 cm depth fixed with suitable screws & PVC rawl plug (4 Nos) for DB comlpete all as specified and directed.

Supply,installing and testing out door wheather proof bus bar chamber of size 60cmx40cmx40cm made out of 3.15mm MS sheet having one side openable hinged door shutter with locking arrangement &provn of two Nos 60cm long 40x40x6mm angle iron legs welded and 4 Nos Aluminium bus bar of 200 Amp rating and incoming MCCB 63 Amps adjustable thermal magnetic release type complete errected on ground with necessary PCC 1;3;6 type C-2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland ,lugs/thimbles complete all as specified and directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded two single core cable of size 6 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Two runs of cable with one run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded two single core cable of size 4 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Two runs of cable with one run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded four run single core cable of size 6 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded two run single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Four runs of cable with two run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded four run single core cable of size 10 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded two run single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Four runs of cable with two run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with 01 No. single pole MCB 20 Amps & including taking down old U/S enclosure complete all as specified & directed .

S&F recess 36/40 watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixture in white finish suitable for low ceiling height ,3in1,3K,4K,6K with & including LED prewired & connecting up & dismantling of old U/S recess mounted light. Make- Shakti cat part No-SZRSRMX036-IC or equivalent make of Havells, Bajaj, crompton

S&F MCCB 4 Pole ,100 Amps rating rupturing capacity 25 KA ,415 volts grade AC,50 HZ magnetic fixed type and making connections including disconnecting & taking down old U/S ,MCCB complete ,all as specified and directed.

S&F MCCB 4 Pole ,63 Amps rating rupturing capacity 16 KA ,415 volts grade AC,50 HZ magnetic fixed type and making connections including disconnecting & taking down old U/S ,MCCB complete ,all as specified and directed.

Disconnecting electric connections and taking down existing electric meter from wooden board ,and S&F new wooden board of size and Reconnecting ,Refixing existing meter to the location as specified & directed.

S&F On load Changeover switch front operated 100 Amp ,AC ,3 Phase 4-pole 415 volts, including taking down old U/S changeover switch Make : Crompton Greaves / Havells/HPL

S&F On load Changeover switch front operated 250 Amp ,AC ,3 Phase 4-pole 415 volts, including taking down old U/S changeover switch Make : Crompton Greaves / Havells/HPL

S&F switch piano flush type single pole ,one way ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch piano flush type single pole ,two way ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch piano flush type single pole ,one way ,15 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch bell push type single pole ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F socket outlet for 2&3 pin,5 Amp flush type 230 Volts ,fixed in repairs all including taking down old UNSV socket any type and connecting up complete all as specified & directed.

S&F socket outlet for 2 in 3 pin 15 Amp flush type 230 Volts ,fixed in repairs all including taking down old UNSV socket any type and connecting up complete all as specified & directed.

S&F electric bell Ding Dong type AC,230 Volts ,single pole ,fixed in repairs all including taking down old UNSV bell any type and connecting up. Make : Havells, Cona, Anchor or equivalent.

S&F angular/batten lamp holder, polycarbonate body with back plate suitable for batten fitting ,fixed in repairsall including taking down old UNSV holder any type and connecting up complet all as specified & directed.

S&F electronic, stepped up & socket type fan regulator ,0-4 step of cap. 100 watt ,230 volts AC,fixed in repairs all including T/D old UNSV regulator any type and connecting up complete all as specified & directed.

S &F ceiling rose surface bakelite 65x50mm ,two or three terminals ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F MCB 32 to 63 Amps ,SPN, 230 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

S&F ,MCB 6 to 32 Amps ,SP,230 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

S&F ,MCB 32 to 63 Amps ,TPN,415 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed & including taking down earth plate.

S&F sealed dry type battery Cap. 65 AH 12 volt type Make -Exide model Powersafe Plus No EP 65-12 & taking down old U/S battery all as specified and directed. Make : Luminous,Exide or equivalent.

Servicing of UPS 10 KVA by blower in existing location ,open connection checking the IC and including replacement of U/S spare parts if any Mass Pad,control card,power card etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply and Fixing LED Bulb energy saving 10/11 W complete all as specified and directed. Make :- Havells/Crompton/Syska

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M&L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L for dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L for GI pipe (Light grade) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of 40 mm bore as specified & directed.

S&F in renewal PVC Rectangular box with 5A flush type 2 in 1 switch socket combination complete all as specified and directed.

S&F in renewal PVC Rectangular box with 15A flush type 2 in 1 switch socket combination 240 V complete all as specified and directed.

S&F in replacement 3 pin 15 Amps Plug Top 250 Volts heavy duty complete all as specified and as directed.

S&F in replacement 3 pin 5 Amps Plug Top 250 Volts heavy duty complete all as specified and as directed.

S&F in renewal LED light fitting 10 Watt 2 feet mirror light luminarire with poly carbonate cover complete with all acessories and driver including connections with with 3 core copper wire of suitable size complete all as specified and directed.

S&F in replacement of unserviceable 10 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 6 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 4 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 2.5 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in renewal LED light fitting, 1X25 watt, complete with tuff net glass protection IP:66, fixed to walls with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed.

S&F 3 watt metal and synthetic LED bedside flexible reading lamp. The lamp shall be of warn white/yellow light with dimensins 5.5cm x 5.5cm x 14.6cm with two year manufacturer warranty. Make : Philips, Havells, Halonix, C&S, Bajaj, Syska or as approved by GE. Note : The quoted rate shall include the point wiring and wiring arrangments required for fixing of the lamp including labour rate adn other misc charges.

Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.MAKE- havels,philips,bajaj

Supply and fixing in replacement of unserviceable garden lights with LED landscape luminaires 10 Watts pressure die cast powder coated housing with PC diffuser,Efficient high output COB for garden, Pathway lightning, IP 66 protection complete all as specified and directed.

S&F in replacement of unserviceable 35W LED Post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection complete with all accessories suitable for connection of copper wires complete all as specified and directed. Make : Crompton, Model - Maple, Cat Part No.: LPT0 - 40 - CDL, 40W LED or Equivalent type in Bajaj / Havells/ Philips / Wipro

Supply and fix in replacement Intelligent, flexible & smart outdoor lighting control unit for automatic switch ON at dusk automatic switching OFF at Dawn with Astronomical Time Switch, high voltage and low voltage protection, 3 Pole / 230V For 12 KW load equally distributed over 3 phases. Minimum IP54 Degre of Protection. Make - IndoAsian, Model - TimeLite, Cat Ref TL065AS0 or Equivalent as Approved by GE.

Supply and fixing of 45watt Inverter LED Light with IR Sensor for automatic On-Off of street light and shall have inbuilt Li-on battery for 90mins power backup in case of power failure. Housing of fixture shall be presurre die cast and system efficacy >100LPW, CRI >70, CCT 5700K, PF>0.9, THD<15%. Make: Halonix Cat. Ref. HLSLD-ML04-45-CWL-INV-DIMM-IRSEN-R or equivalent

Supply only surge protector 10 kA with IP 65 protection, as per IS

Supply only driver suitable for 45 watt LED with IP 65 protection, as per IS

Supply only driver suitable for 60 watt LED with IP 65 protection, as per IS

Supply only driver suitable for 90 watt LED with IP 65 protection, as per IS

Supply Installation Testing and Commissioning in replacement of Lithium based Solar LED Security light System with built in Battery and PV Panel and LED lamp in FRP/Aluminium body including taking down of old unserviceable light fitting of any size/capacity complete. System Comprises Followings :- 1. 1. PV Panel 30W Monocrystalline. 2. Lithium Cell for back up 15.4AH with inbuilt BMS. 3. High brightness W-LED lamp 16W, CRI>700, CCT6500K. 4. Microcontroller based charge controller cum driver with automatic dimming function, Dusk to Dawn Operation. 5, Working temperature: (-) 10°C to (+) 55°C. System should be supplied with adjustable MS clamp and 40mm dia arm suitable for pole/wall mounting complete with satisfaction of Engineer In Charge.

ALAKNANDA ENTERPRISES (BID ID -3356668)

M/S Naglot Enterprises (BID ID -3345135)

M/s ASK Enterprises (BID ID -3356946)

shiva construction (BID ID -3356663)

M/S GAURI CONSTRUCTION (BID ID -3352494)