PROVISION OF URINAL POINTS WASHING POINTS TOILETS IN BLDG NO T 47 05 x SENTRY POSTS AND ADDN ALTN TO BOUNDARY WALL CHOUDHARY LINE MD ACCN UNDER GE NORTH BANGALORE

Amount

B/R WORKS

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick in hard/dense soil complete all as specified and as directed.

Removing excavated material(soil) to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the staring point complete all as specified and as directed.

Hardcore of gauge n.exc. 63mm, with broken stone or boulders, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Plain Cement Concrete as in foundation filling and mass concrete (1:4:8), type D-2, using 40 mm graded stone aggregate complete all as specified and as directed.

Precast cement concrete block masonry with solid blocks PCC (1:3:6), type C1 exc. 10cm in width and setting in CM(1:4) complete all as specified and as directed.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under reelvent items.

Supply only integral liquid water proofing compound all as specified and as directed.

Rolled mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop / factory before fabrication complete all as specified and as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and as directed.

10mm thick rendering on brick or concrete surface in cement mortar (1:4) and finishing the surface with even and smooth without using extra cement complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

Roof treatment by applying bitumen primer @ 0.27kg/sqm, providing 3mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 180gm/sqm, having softening point not less than 140 centigrade, having tensile strength of 650 N/sq.cm in longitudinal and transverse directions, the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap applying a coat of blown grade hot bitumen VG-10 over the membrane @ 1.2kg/sqm, top of membrane shall than be finished with solar reflective bituminous aluminium paint @0.10kg/sqm all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Reinforced cement concrete, M-25(Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter etc with rough finished flat concrete surfaces complete all as specified and as directed.

Steel formwork to sides of pillars, posts, struts, piers, columns and stanchions etc with rough finished flat concrete surfaces complete all as specified and as directed.

Steel form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs etc also splays between floors and beams etc with rough finished flat concrete surfacescomplete all as specified and as directed.

Steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) etc, with rough finished flat concrete surfaces complete all as specified and directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 8mm dia, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups all as specified and as directed.

Plain Cement Concrete,(1:2:4), type B0, 25mm thick as in damp proof course using with and including supply of approved integral liquid water proofing compound as per manufacturers instructions complete all as specified and as directed.

Precast Plain Cement Concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type B1 (1:2:4), using(20mm graded stone aggregate complete, as in walls in width and setting in cement mortar (1:6) complete all as specified and as directed.

Moorum/red bajri filling as in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 100mm thick complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in levelling course, 25mm thick, complete all as specified and as directed.

Non skid ceramic coloured printed tiles 7 to 8mm thick(square/ rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11sqm, as in floors, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over 20 mm thick cement screed in cement motor (1:4) all as specified and as directed.

Glazed ceramic coloured tiles 300 x450 x 7 to 8 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) all as specified and as directed.

Rendering 5 mm thick on surface of brick work / concrete surfaces in CM (1:3), surfaces finished even and smooth without using extra cement on ceiling complete all as specified and as directed.

Preparation of new or previously un treated plastered wall surfaces of any description and applying two coats of cement base paint over a coat of alakli resistant primer complete all as specified and directed.

Preparation of newly plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered wall surfaces of any description and applying three coats of white wash over one coat of chalk whiting complete all as specified and as directed.

Factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed to wall all as specified and as directed.

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with wood free EPS and 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawings.

PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed.

PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.

PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed.

Anodised aluminum powder coated (of any shade/colour as approved by GE ) ventilators of size 600 x 900 mm with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm complete etc all as specified and as directed.

Rolled Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to steel door complete all as specified and as directed.

Mild steel pressed handles oval type stove enameled black 150mm size complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe, anti syphonage pipe, plastic water closet seat, closed pattern with flat bottom and cover including plastic EWC seat cover, coloured closed pattern with flat bottom and cover of CERA model Cat part No. 2308 and mild steel chromium plated or aluminised hinging device and PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity including brackets as per Prayag Cat No. 502 or equivalent , PVC connection 15mm dia & Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia as in repairs complete all as specified and directed.

Vitreous china wash hand basin white flat back of size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe 75 cm long and 15mm dia PVC connection complete all as specified and as directed.

Vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including supply and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.

18-20mm thick Granite (of any type) tiles machine cut as in skirting / dado / urinal partition including necessary fitting arrangements, nosing and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.

20mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed.

16mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs capacity complete complete all as specified and as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed(Min weight 20mm-210 gms) all as specified and as directed.

Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

15 mm dia pillar taps swan neck type, chromium plated cast copper alloy fancy type all as per Prayag Cat No PIS-14H or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

15mm dia angle cock, chromium plated, cast copper alloy, screwed down high pressure with capstan head handle screwed both ends or for unions etc., all as per Prayag Cat No PIS-10H or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

Two way bib cock 15mm dia, double handle with chromium plated flange all as per Prayag Cat No PIS-12H or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

Health faucet, brass body with 1mtr long stainless steel braided tube and wall hook all as per Prayag Cat No BEA-41/BEA-85 or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

Towel rail stainless steel, glossy finish all as per Prayag Cat No BA10S or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

Soap dish chromium plated brass fixed to wall all as per Prayag Cat No BA-45 or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

Looking mirror of size 600x450 x5-6mm, with frame all as per Prayag Cat No. BLM-01F or techno commercially equivalent makes as specified in PS complete all as specified and as directed.

PTMT Shelf of minimum weight 300gms of size and pattern as approved fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

Peg set of six all as per Cat No BEA 30 of Prayag or equivalent fixed on walls all as per manufacturers instructions complete all as specified and as directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

32mm dia, 800mm long corrugated waste pipe complete all as specified and as directed.

75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to walls / floors including PVC clamps and necessary fittings complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to walls / floors, laid in trenches including PVC clamps and necessary fittings complete all as specified and as directed.

200 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches or in floors and necessary fittings complete all as specified and as directed.

Plain Cement Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and in PCC (1:4:8) type D2 using 40 mm graded stone aggregate for PVC(SWR)/RCC pipes after they are laid and tested suitable for 200mm dia bore pipe all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

75 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (single Y), type 'B' equal or unequal complete all as specified and as directed.

75 mm bore PVC (SWR) junction single (single Y), type 'B' equal or unequal complete all as specified and as directed.

110 mm bore PVC (SWR) branch piece (double Y), type 'B' equal or unequal with access door complete all as specified and as directed.

75 mm bore PVC (SWR) branch piece (double Y), type 'B' equal or unequal with access door complete all as specified and as directed.

PVC (SWR) vent cowl of bore 75 mm dia all as specified and as directed.

PVC (SWR) vent cowl of bore 110 mm dia all as specified and as directed.

Cutting into existing manholes for connecting new drains by cutting out existing benching for and forming branch, channel (1/2 round or ¾ section) in cement concrete (1:2:4)type B-1 smooth finishing & making good to pipe as per existing by rendering & reforming benching as reqd for 200/300mm bore pipe complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitrerd/stopped ends etc., complete all as specified and directed.

Precast Reinforced Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in cover slabs of man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in CM (1:4) complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B1, using 20 mm graded stone aggregate as in coping, bed blocks, hold fast and similar work etc complete all as specified and as directed.

10mm thick rendering on brick or concrete surface in cement mortar (1:4) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Machine pressed (rubber moulded) precast cement concrete inter locking paver blocks of any shape and size conforming to IS 15658-2006 of 60mm thickness, of M-35 grade with grey cement and pigment fixed over 50mm thick sand cushioning complete all as specified and directed.

Preparation of new or previously untreated plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty finished to smooth surfaces complete all as specified and directed.

Preparation of new or previously untreated plastered ceiling surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty finished to smooth surfaces complete all as specified and directed.

Preparation of new or previously un treated plastered wall surfaces of any description and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

Plain Cement Concrete type C-1, (1:3:6) using 20 mm graded crushed stone aggregate, 75mm thick as in plinth protection, laid in alternate bays (not exceeding 2 sqm each) finished the concrete surfaces even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and as directed.

Chequerred cement concrete tiles 300x300x25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of tiles over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

Plain Cement Concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in levelling course, 25mm thick, complete all as specified and as directed.

Matt finished coloured ceramic tiles 9-10mm thick (600mmx600mm Rectified Digital floor tiles) as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM(1:6) complete all as specified and directed. Make Satin series of kajaria or techno commercially equivalent of somany/Navin/Jhonson

All as per Sl Item No 1.41 above but as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM (1:4) on brick or concrete surfaces finished rough to receive wall tiles complete all as specified and directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of brick work or stone / PCC /boulder masonry built in cement mortar or lime mortar including all quions, arches, pillars but excluding ashlar facing, dressed stone work of any description all as specified and directed.

Walling of squared rubble stone masonry, regular coursed, well bonded, bedded and solidly hearted built in CM (1:4) complete all as specified and directed.

All as per Sl Item No.1.099 above but except stone. NOTE:- Serviceable stone as obtained from Sl Item No. 1.098 above shall be reused.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finishing the plastered surface even and smooth without using extra cement complete all as specified and directed.

Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar (1:3) complete all as specified and directed.

Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar (1:3) including raking out joints complete all as specified and directed.

Rolled Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Rolled Mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter shunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

Dismantling fencing wire mesh of any description complete all as specified and as directed

Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type standard rails, staining bolts incl securing, tying at crossing with and provision of galvanized steel wire staple or steel pins etc as directed. NOTE:- Each line to be measured.

Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-290 Gde E-165 complete all as specified and as directed.

Broken glass coping in CM (1:3) with approved glass pieces on top of wall including removing rubbish off the premises complete all as specified and as directed.

Concentrena coil over angle iron frame fixed over wall complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

E/M WORKS

Point wiring complete with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories surface type / concealed type wiring, including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed / mounted on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for. (a) One light point controlled by one switch.

(b) One fan /exhaust fan point controlled by one switch/regulator.

(f) one 3 pin socket out let 5 A on same board.

Point wiring complete with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium density ISI marked with accessories surface type / concealed type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted / concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, including provision of 2.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. NOTE FOR SL ITEM NO. 2.007 TO 2.013 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

LED batten fittings, 18 watts, 6000K, (4 feet long), suitable for indoor applications wall mounted with extruded aluminium heat shink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders, connector block , lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No. 830192 18W CDL / Halonix Cat No. HLB-03-18-CW-AL or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

LED tube light fittings, 10 watts, 6000K, (2 feet long), wall mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block, lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No.830206 10W CDL / Halonix Cat No. HLB-03-10-CW-AL or techno commercially equivalent makes specified in PS including connecting up with twin core twisted flexible copper conductor cable all as specified and directed.

Switch Piano, flush type, 5 Amps, 240 Volts single pole with ISI marked including taking down the existing complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switchincluding taking down the existing complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal including taking down the existing complete all as specified and as directed.

Ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals including taking down the existing all as specified and as directed.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

Exhaust fan 230Volts, SP, 300 mm Sweep with BEE five star rating,high speed, heavy duty complete with Louvers, clamps with screws nut and bolts, including wire connections from ceiling rose to Exhaust fan complete with all accessories including writing of MES No with Unit Name on Exhaust fans using stencil with synthetic enamel paint all as specified and as directed.

45 Watt LED building security light fitting with pressure die cast housing, with secondary optics and IP-65 protection complete all as per Bajaj, Cat No. ENXT P 54L WH CR PC SD or or techno commercially equivalent makes specified in PS all as specified and directed.

MCB single pole and neutral 240 Volts, 40 Amps complete all as specified and as directed.

GI pipe bracket made of 40mm bore light grade GI pipe1.5 mtr long suitably bent to shape and fixed on wall/ pole for fixing street light fitting with 2 Nos suitable MS clamps of size 25 x 3 mm size incluiding bolts, nuts, washers all as specified and as directed.

MCB DB SPN 4 way 240 volts, double door, with 200 Amps rated busbar for housing MCBs all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for cable laying / errection of poles and getting in hard/dense soil complete all as specified and as directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Removing the excavated material to a distance exc. 50m but n. exc. 100m and depositing where directed at a level n. exc. 1.5m above the starting point.

Sand cushioning in layers for cables in trenches / ducts for cable using dry river sand including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

Galvinised iron tubing, light grade, 40mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

XLPE insulated cable, screened, PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq.mm 2 core connected with suitable lugs complete all as specified and as directed.

Galvanised iron pipe of 25mm dia, medium grade, laid in trenches, floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

25mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs complete all as specified and as directed.

MCB single pole 240 Volts, 6 to 32 Amps complete all as specified and as directed.

Sreyas Enterprises

PRACHANIVA CONSTRUCTIONS

deepak kumar vishwakarma