Construction of ware house for storage of electronic machines EVMs and VVPATs at Kather Solan

Amount

Cutting in earth work in hilly areas in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiselling and wedging out of rock; (where blasting is prohibited) and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and transportation of the unuseful materials on approved dumping sites or otherwise (to be arranged by the contractor including payment of prescribed dumping charges of Municipal Committee / Local body if levied any) to the satisfaction of Engineer in Charge through all modes of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and with all kind of labour, machineries, tools, equipments and safety measures and incidentals necessities to complete the work by mechanical means and labour (if any required) .All useful materials, such as stones, shingles, aggregate and slates shall be probably stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used / removed as per the direction of Engineer in Charge. The cost of such useful stone shall be recovery of 161.66 ( One hundred & sixty one point six six) cubic metres and it shall be made @ Rs. 350/- (three hundred & fifty) per cubic meter on prorate basis in each running bill plus / minus contractor premium. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites arranged by the contractors including payment of prsecrbed dumping chargaes of MC/local body if levied any through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent and used/ removed as per direction of Engineer in Charge in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all iincidential charges.

Excavation in earth work in drains and channels in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft & hard rock and wedging out of rock;(where blasting is prohibited)and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, grades, side slopes, trimming bottoms and levels as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume - I and sorting out useful unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials to approved dumping sites arranged by the contractor including payment of prsecrbed dumping charges of MC/local body if levied any through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All useful materials, such as stones, shingles, aggregates and slates shall be sorted out and stacked along road side /site of work to the maximum possible extent and used / removed as per direction of Engineer in Charge in all leads and lifts through all modes of transportation, Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor shall have to be duly compensated by him in all respects, including all iincidential charges.

Earthwork in excavation for all type of road structures such as retaining wall, breast wall, culvert, drain and parapets etc. in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiesling / wedging out rocks (where blasting is prohibeted) true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 305.1(Three hundred Five point One) including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all lead and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable material. All work of excavation by blasting shall be carried out by taking all necessary precautions against soil erosions, damage to hill side, water pollutions etc., and to protect stability of hill side rock. Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable excavated materials in specified manners to dumping site (to be arranged by the contractor), trimming, filling of unevenness blindages and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Filling in plinth with course sand under floor including, watering, ramming, consolidating and dressing complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:

Foundation footings basis of columns etc. and mass concrete.

Vertical surfaces such as walls of any thickness

Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to any thickness.

Columns pillars, posts and struts square rectangular or polygonal in plan.

Beams, cantilever, girders and lintels:-sides and soffits of beams, beam haunchings cantilever, girders bressumers and lintels not exceeding 1 (one) meter in depth.

Stair cases with slopping or stepped soffits excluding landing.

Edges of slabs and breaks in floors and walls

Providing and laying cement concrete 1:8:16 (one cement isto eights sand sixteen graded stone aggregate 20mm ( twenty milimeters) nominal size) screed laid under flooring and curing complete on slab and floor excluding the cost of form work as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and laying cement concrete 1:6:12 [One cement isto Six sand isto Twelve graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying concrete for plain/reinforced concretre 1:6:12(one cement:six sand:twelve graded crushed hard stone aggregate 40(forty)millimeter nominal size)mechanical mixed, vibrated and curing complete including form work in open foundation as per drawing and technical specification of MORD 800 & 1200(Eight hundred and one thousand two hundred)clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying cement concrete 1:4:8 [ One cement isto Four sand isto Eight graded hard stone aggregate 40 (Forty) millimetres nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying concrete for plain Cement concretre in 1:4:8 (one cement: four sand: eight graded crushed hard stone aggregate 40 (forty) millimeter nominal size) mechanical mixed, vibrated and curing complete in open foundation and plinth for all type of structure including the cost of form work complete as per drawing and MORD Technical Specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidental charges.

Providing and laying plain cement concrete Grade M- 10 (Ten) nominal mix 1:3:6 (one cement isto three sand isto six graded crushed hard stone aggregate 20mm ( twenty millimetre) nominal size) mechanically mixed, vibrated and curing complete in open foundations including form work as per drawings and MORDTechnical Specifications Clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) and as per the direction of the Engineer-in-Charge including carriage of material through all modes of transportation within all leads and lifts and other incidental charges.

Providing and laying cement concrete work 1:2:4 (one cment: two sand: four graded crushed hard stone aggregate 20mm (twenty millimeter) nominal size) in foundation and plinth, and curing complete excluding cost of form work as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and laying reinforced cement concrete M-20 grade i.e. 1:2:4 (one cement isto two sand isto four graded crushed hard stone aggregate 20mm nominal size) mechanically mixed, vibrated and curing complete including form work in open foundation complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including carriage of all labour equipments and material to various location through all modes of transportation in all leads lifts and all incidential charges

Providing and laying cement concrete 1:1½:3 [ One cement isto One and half sand isto Three graded crushed hard stone aggregate 20 (Twenty) millimetres nominal size]mechanically mixed, vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work, as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:

Foundation, footings, bases of columns and the like and mass concrete in all depths and levels.

Wall (any thickness but not less than 0.1 m (zero point one meter) thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level to all heights and levels.

Suspended floors, roofs landings shelves and their support balconies, beam, girders bressumers and cantilevers in all floors up to all heights and levels.

Columns, pillars, posts and struts in all floors up to all heights and levels.

Stair cases (except spiral staircases) excluding landing but including preparing of the surface and finishing of noising in all floors height and levels.

Providing and laying in all floors upto any height reinforced cement concrete 1:2:4 (One cement isto two Sand isto four graded stone aggregate 20mm (twenty milimeters) nominal size) mechanically mixed and vibrated and curing complete, to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in Mouldings as in cornices windows, sills etc. not exceeding 15cm.(fifteen centimeters) in girth as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing Mild steel / tor steel bar reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete as per structural drawing in all floors heights and levels, direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying, fitting and placing Mild Steel/ Tor steel bar reinforcement in foundation complete as per drawings and MORD technical specifications Clauses 1000 and 1202 (one thousand & one thousand two hundred two), including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. (two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement isto three sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges

Bricks work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (One cement isto Six sand) in all depths and levels as per drawing and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Brick work using second class common burnt clay building bricks in super structure above plinth level in all floors heights and levels in cement mortar 1:6 (One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick work using common burnt clay Second class building bricks in foundation and plinth level in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick work using common burnt clay Second class building bricks in super structure above plinth level in all floors height and level in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought tocourses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement: 6 sand:12 geraded stone agg. 20mm (twenty milimeters) nominal size) in cement mortar 1:6 (1cement :6sand) as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in cement mortar 1 : 4 ( one cement isto four sand) and including rakingout joints as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia PVC pipe extending through the full width of the structure with slope of 1:20 (One verticle isto twenty horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614, 709, 1204.3.7(six hundred forteen, seven hundred nine, one thousand two hundred four point three point seven) or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidentals charges.

Providing and fixing panelled glazed or panelled and glazed shutters for main door made of second class deodar wood style and rail with top rail 100mm x 40mmk, middle rail 150mm x 40mm and bottom rail 20mm x 40mm finished with pannel of 12mm thick phenol bonded prelaminated board dises below middle rail and above middle rail shall be of 5mm thick glass pan including beeding of approved size and black enamelled iron butt hinges with necessary screws as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 40 mm (Fourty milimetres) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 12 mm (twelve milimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with 40 mm (fourty mlimetres) thick frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws complete as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 12 mm (twelve milimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with 25 mm (twenty five mlimetres) thick frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws complete as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 40mm (forty milimeters) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85(eighty five) G. with wire of dia 0.56 mm (zero point fifty six millimeter) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lift including all incidental charges.

Providing and fixing 19mm thick Commercial Board water proof in shelves/box with but joint i/c fixing with nailsand screws etc.complete including carriage of materials within all leads and lift including all incidental charges.

Providing and fixing 6 mm (six milimeters) thick. commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) as per HP.PWD specification 1990(one thousand Nine Hundred Ninety ) Volume -I , including carriage of all labour quipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges .

Providing and fixing 1 (One) millimeters thick coloured and plain laminated sheet (sunmica) of UROMICA or equivalent in out side of cupboard shutters or boards/plywood sheets with approved adhesive and nails etc. complete as per direction of the Engineer-in-Charge and HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing square edge cover fillets (beading) in hard wood 19*6 (Nineteen into Six) millimeters including mitering at junctions with wood screws and nails complete as per direction of the Engineer-in-Charge and H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 3mm (three milimeter) thick ACP sheet ceiling of approved quality with butt jointing mounted on powdercoated GI Frame with specified clamps and screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all iincidential charges.`

Providing and fixing cromium plated mild steel sliding door bolts of required colour & shade with nuts, bolts and screws etc. complete in all respect as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

300*16 mm ( three hundred into sixteen millimeters)

250 x 16 mm (two hundred fifty into sixteen millimeter).

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

250 x 10 mm (two hundred fifty into ten milimeter).

200 x 10 mm (two hundred into ten millimeter)

150*10 (One hundred fifty into Ten millimeters) size

Providing and fixing powder coated aluminium handles anodized, transparent or dyed to required colour or shade with necessary screws etc. complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

125 mm (one hundred twenty five millimeter)

100 mm (one hundred millimeter)

75mm (seventy five milimeters )

Providing and fixing M.S. plain grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of materials in all lead, lift and all incidental charges.

Providing and fixing PGI sheet lining with nails and necessary screws complete as per Architectural drawing and H.P.PWD. spesification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipment and material in all heights and level to various location of site through all modes of transportation in all leads and lifts , including all incidental charges

Providing and fixing 15mm (fifteen milimeter) diameter stainless steel curtain rod with brackets, plugs, screws etc. as per direction of Engineer-in-Charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges

Providing and fixing 100mm (one hundred milimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Magnetic catcher (m-15) with necessary screws etc. complete, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 65x35mm(sixty five into thirty five millimeter) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etc. complete (Indian make of approved quality) as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 115mm (one hundred & fifteen millimeter) bright finished brass haps and stapples (safety type) with necessary screws etc complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150mm ( one hundred fifty millimeters) Mild Steel single acting spring hinges with necessary screws etc. complete as per direction of Engineer in Charge and as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing double acting Mild Steel spring hinges bright finished with necessary screws etc. complete.as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`

Providing and laying 25mm ( twenty five milimetres ) thick mirror polished Kota stone slab flooring with slab size not less than 550mmx550mm , laid over 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab Including rubbing and polishing complete as per the direction of Engineer-in Charge including carriage of materials with in all leads, lifts and other incidental charges.

Providing and laying spartic ceramic tiles 5.5mm thick (300x300mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials in all lead and lift including all incidental charges.

Providing and laying Kota stone slab 25mm(twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimeter (average) thick cement mortar 1:3 (one cement: three sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lift including all incidental charges.

Providing and laying red sand stone slab flooring 40mm (forty milimeter ) average thick on 20mm (twenty milimeter) average thick base of cement mortar 1:4 (One cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges

Providing and laying marble work with 20 mm (twenty milimetres) thick white makrana marble (Table rubbed and polished) in flooring / skirting / dado over 20mm. (twenty miliometres) thick base in cement mortar 1:3(1cement:: 3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble complete in all respect as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Making half round nosing in granite stone in treads of steps, skirting, dado etc. with mechanical means including rubbing and granite polishing complete as per the direction of Engineer-in Charge including carriage of materials with in all leads, lifts and other incidental charges.

Providing and laying white glazed tiles 300 mm X 300 mm X 6mm thick or 300 mm X 450 mm X 6mm thick in skirting, risers of steps and dado laid on 12mm thick cement mortar 1:3 (1cement : 3sand) and jointing with neat cement slurry as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lift including all incidental charges.

40 (Forty) millimeters thick Cement concrete flooring in 1:2:4 (One cement isto Two sand isto Four graded crushed hard stone aggregate 20 (twenty) millimeters nominal size) mechanically mixed, vibrated, laid in One layer finished with floating coat of neat cement in all floor levels and curing complete as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying 40mm ( forty milimeters ) thick ISI Marked IS No. 15658 of NTC or equivalent brand heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 (fifty) grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five milieter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately ) as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 80 mm (eighty milimeters) as per drawing and Technical Specification Clause 1504, as per direction of Engineer in Charge including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Providing and fixing 0.60mm ( zero point sixty millimetre) thick prepainted steel sheet of Tata Durashine or its equivalent brand and of required shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing and fixing 0.60 mm ( zero point sixty millimetre) thick prepainted steel sheets ridges or hips 60 cm overall width of Tata Durashine or its equivalent brand of required shade and design in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing and fixing 0.60 mm ( zero point sixty millimetre) thick prepainted steel sheet valley 60cm overall width of Tata Durashine or its equivalent brand of required shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing and fixing 0.60 mm ( zero point sixty millimetre) thick prepainted steel sheet flushing 38cm overall width of Tata Durashine or its equivalent brand of required shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing fixing 30 cm wide 120 cm overall box type gutter of 0.45mm ( zero pointfour five milimeter ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating, gutter fixed on iron brackets 40 X 3 mm size including bolts, nuts and washers etc. and making necessary connections withrain water pipe copmlete as per design including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing and fixing on wall face PVC (D-Plast) 150 mm (one hundred & fifty milimeters) dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidential charges

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :-

150 mm (one hundred & fifty milimeters) dia PVC plain bend.

150 mm (one hundred & fifty milimeters) dia PVC door bend.

150 mm (one hundred & fifty milimeters) dia PVC plain shoe.

Providing and fixing 150 mm diametre M.S. holder bat clamps of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc including carriage of materials within all lead and lift including all incidental charges.

Providing and fixing M.S. BP Sheet 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lift including all incidental charges.

Steel work of BIS specification i/c Hollow Section welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all lead and lift including all incidental charges.

In beams joists, channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

In gratings, framed, guards, bars ladders and railing, brackets and similar works

Steel work rivetted in built up sections including cutting, hoisting, fixing, in position and applying a priming coat of red lead paint in In grating, Framed guards, bars, ledders railings, brackets & similar works as directed by the Engineer-in-Charge including carriage of materials with in all lead and lift and other incidental charges.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25X25X5mm (twenty five into twenty five into five millimeter) thickness including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 25X25 mm (twenty five into twenty five milimeter) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimeter thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing single rebate door frame manufactued from ISLC 75 mm (with MS Flat 75X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 1.5 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete in all respect as directed by Engineer-in-Charge as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

End frame.

Centre / Mullion frame.

Providing and fixing double rebate door frame manufactued from ISLC 125 mm ( with MS Flat 125X4 mm for cenrte frame) & MS hollow section for rebate 40X20 mm and 2.00 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift including all incidental charges.

End frame.

Centre / Mullion frame.

Providing and fixing angle iron door, window, clerestory window frame manufactured from steel iron section of 40*40*6 (fourty into fourty into six) millimeters thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle 50*25 (Fifty into twentyfive ) millimeters welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5 (Two point Five) millimeters thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing steel railing in ramp for hanicaped made of MS. 50 mm dia steel pipe slip resistant with round ends at 75 cm and 90 cm height and suported with 25 mm dia steel pipe dully welded in all corners and fixing in position complete as per architectural drawing including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift including all incidental charges.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separately)as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I (one), including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing in position collapsible steel shutters with vertical channels 20mmx10mmx2mm (twenty into ten into two millimeter) and braced with flat iron diagonals 20mmx5mm (twenty into five millimeter) size with top and bottom rails of T-iron 40mm x 40mm x 6mm (forty into forty into six millimeter) with 38mm (thirty eight millimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including aplying a priming coat of red lead paint as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift including all incidental charges.

Providing & fixing M.S. round holding down or anchor bolt with nuts and washer plates as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat ) on new steel and other metal surfaces with Enamel Paint other than white, brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required & as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift including all incidental charges.

Applying priming coat with ready mixed primer (pink paint) over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting as per HPPWD specification 1990 ( one thousand nine hundred ninety ) volume-1 including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.

Painting two coats with enamel paint other than white (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping:-including carriage of materials in all leads and lifts including all incidental charges.

Applying priming coat with Readymixed primer on new concrete/ masonry/ asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required and as specified in the detailed specification and direction of the Engineer-in-Charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Painting two coats (excluding priming coat) on new concrete masonry / plaster surfaces with readymixed paint other than white brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as per direction of the Engineer-in-Charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and applying 6(Six) millimeters thick plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) in all floor heights and levels, as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15mm (fifteen millimeter) thick cement plaster in single coat on rough side of brick/conctrete/stone walls for interior / exterior plastering upto all floor level including arises, internal rounded angles, chamfers and rounded angles having any depth in girth and finished even in and smooth in cement mortar 1:6 (one cement:six sand) as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

15 (Fifteen) millimeters thick cement plaster in pattern as shown in architectural drawing on the fair side of brick/concrete/stone walls for interior / exterior plastering up to all floor level including arises internal / external rounded angles, chamfers and/or rounded angleshaving any depth in girth and finished even and smooth in cement mortar 1:6 (One cement isto Six sand), as per direction of Engineer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior / exterior plastering up to all floor level including arises internal / external rounded angles, chamfers and/or rounded angles having any depth in girth and finished even and smooth in cement mortar 1:6 (One cement isto Six sand), as per direction of Engineer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

15mm(fifteen millimeter) cement plaster in single coat in cement mortar 1:4 (one cement isto four sand) on rough side of brick/concrete/stone walls for interior plastering upto all floor heights or level i/c arises internal rounded angles, chamfers and/or rounded angles having any depth in girth and finished even and smooth as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Applying one coat of Acrylic primer (Spectrum or equivalent of superior quality) on new concrete/masonry/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters sand papering the surface smooth complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing wall with two coats of Apexultima or its equivalent quality of approved brand and manufacture weather proof exterior grade emulsion paint of required shade on undecorated wall surfaces to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as specified in the detailed specification and direction of the Engineer-in-Charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts.

Providing under layer for plinth protection of 75(Seventy Five) millimeters thick (unconsolidated) bed dry brick /stone aggregate 40(Forty) millimeters nominal size well rammed and consolidated and grouted with fine sand including preparation of ground, as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall,15*22(Fifteen*Twenty Two) centimeters in cement mortar 1:6 (One cement isto Six sand)and inside plastering with cement mortar 1:3 (One cement isto Three sand)including earth work and laying 10(Ten) centimeters cement concrete in 1:5:10 {One cement isto Five sand isto Ten graded hard stone aggregate 40 (Forty) millimeters nominal size} and7.50 (Seven point Five Zero) centimeters cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (twenty)millimeters nominal size}and finished with a floating coat of neat cement complete as per standard design and HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing chases 75mm (seventy fife milimeters) wide 50mm ( fifty milimeters) deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (one Cement isto three Sand isto six Graded crushed stone aggregate 20 mm (twenty milimeters) and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and liftsincluding all incidental charges.

Supplying and fixing 300 mm X 300 mm precast RCC cover with frame for gully trap complete including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

Supplying and fixing precst RCC cover without fram having dimensions 455*610 (Four Hundred Fifty Five into Six Hundred Ten) millimetres for man holes complete including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

Supplying and filling brick bats in soak pit as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Supplying and filling crushed stone aggregate in soak pit of following sizes as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all incidential charges.

25mm (twenty five milimeter )size.

12 mm (Twelve milimeter) size.

Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm (one hundred fifty milimetres), mixed with water at Optemum Moisture Contents and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4 as per directions of the Engineer-in-Charge including carriage of all labour, equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Providing and laying 20mm (twenty milimetre) diameter Galvinised Mild Steel tube (medium grade) in trenches with filling etc. complete (earth work in trenches to be measured and paid for separately) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing to wall, ceiling and floor galvinised mild steel tubes (medium grade ) tube fittings and clamps including making good the wall, ceiling and floor as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

20mm (twenty milimeters) nominal bore

15mm (fifteen milimeters) nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main line 20(Twenty) millimeters to 40 (forty) millimeters nominal bore ISI marked by providing and fixing tees including cutting and threading the pipes complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Fixing water metre and stop cock in 20mm ( twenty milimetres ) nominal bore galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, socket etc. cutting and making long screws complate (water meter and stop cock to be paid for separately) including carriage of materials within all leads and lift.

Providing and fixing 1000 (one thousand ) litres net capacity tank P V C water storage tank of ISI :12701 marked G.I inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof P V C cover with locking arrangements including hosting up to all heights above ground level including carriage of materials within all leads and lift including all incidental charges.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

1216 (16 mm O.D. pipe)

1620 (20 mm O.D. pipe)

Providing and fixing PE-AL-PE composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees , elbows, reducers,connectors, couplers and clamps with jointing testing and fixing incluing cutting and making good the walls etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

1216 mm Equal Tees.

1620mm Equal Tees.

1620 x all branches Reducing tee

2025 x 2025 x all branche Reducing tee

1216 X 1216 X 15 mm thread Female branch Tee

1620 X 1620 X 20 mm thread Female branch Tee

1216 X 15 mm thread Female elbow

1620 X 15 mm thread Female elbow

Male thread connector 1216 X 15 mm thread

Male thread connector 1620 X 15 mm thread

Female thread connector 1216 X 15 mm thread.

Female thread connector 1620 X 15 mm thread.

1216 mm Couplers

1620 mm Couplers

1620 x 1216 mm Reducers

2025 x 1216 Reducers

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC door bend with oval acces door ISI marked , insertion rubber washer 3 mm thick bolts and nuts complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC offset 45 Govt. Degree ISI marked including fixing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC double equal branch with oval acces door ISI marked, insertion rubber washer 3 mm thick bolts and nuts complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres )dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres ) dia

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

110 mm x 90 mm (one hundred ten milimetres into ninety milimetres )

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm x 110 mm dia (one hundred fifty milimetres into one hundred ten milimetres )

Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres ) dia

Providing and fixing PVC cowl with adhesive complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm dia.

110 mm dia.

Chase in stone / brick masonary walls for fixing PVC pipes and fitting including making good the same with stone / brick work in cement mortar 1:3 ( 1 cement : 3 sand ) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

150 mm (one hundred fifty milimetres ) dia

110 mm (one hundred ten milimetres ) dia

Providing and fixing vitreous china Anglo Indian universal wash down water closet (European type W,C.pan) of Hindware or equivalent brand with integral P or S trap including jointing the trap with soil pipe in cement pipe in C.M. 1:1( 1cement :1 sand ) (seat and cover to be measured and paid for separately) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing viterous China Orrissa pattern water closet squatting pan (Indian Type W.C. pan) of Hindware or equivalent brand size 580mm (five hundred & eighty milimeters )(Earth work, bed concrete, foot rest and traps to be measured and paid for separately complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 10.00 ltr. capacity PVC Hindware low level duel flushing cistern (sleek plus ) of approved shade with a pair of C.I. or MS brackets with fittings such as lead valve, less syphon, 15mm nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend including cutting holes in wall and making good the same and connecting the flush bend with cistern and closet & over flow pipe to be paid for separately) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing Coloured / White plastic seat and cover (Solid type ) for wash down water closet with C.P. brass hinges and rubber buffers complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing vitreous china bowl pattern urinal Flat back type of size 430x260mmx350mm(four hundred thirty into two hundred sixty into three hundred fifty milimeter) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 10 ( ten ) litres capacity Vitreous china automatic flushing cistern with a pair of C.I. or M.S. bracket complete with fittings including C.I. syphonic apparatus, mosquito proof lid, C.P. brass union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts including all incidental charges.

Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same :-15mm (fifteen milimeter) nominal bore as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and fixing 550mmx400mm ( fife fifty into four hundred milimeters) vitreous China Flat back wash basin of Hindware or equivalent brand with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per direction of Engineer in charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Hindware or its equivalent brand vitreous china pedestal for wash basin recessed at the back for the reception of pipes and fittings complete including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 32mm (thirty two milimeters) dia C.P. Brass waste (heavy duty ISI Marked IS : 8931 & 8934 ) for wash basin or sink complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing & fixing 32mm(thirty two millimeter) dia pvc waste pipes flexible coil type not less than 800mm length for wash basin or sink including brass check nut complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing & fixing 100 mm dia C.P. grating for floor or nahani / gully / floor trap complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 600x20mm (six hundred into twenty millimeter ) size C.P. brass towel rail (heavy duty ISI Marked IS : 8931 & 8934 ) complete with C.P brass screws and washers complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 15 (Fifteen) millimeters dia chromium plated brass bib tap with capstan head (heavy duty ISI Marked IS : 8931 & 8934 ) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 15mm (fifteen millimeter) dia chromium plated brass pillar tap (heavy duty ISI Marked IS : 8931 & 8934 ) complete in all respect including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing 15mm (fifteen millimeter) dia chromium plated brass angle valve (heavy duty ISI Marked IS : 8931 & 8934 ) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing 15 ( fifteen ) milimeter nominal bore PVC connection pipe with brass unions having 45 ( forty five ) centimeter length complete in all respect including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing brass full way valve with wheel ISI Marked complete in all respect including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

15 ( fifteen ) milimeter nominal bore

20 ( twenty ) milimeter nominal bore

Providing and fixing G.I.or M.I Union of following sizes (where not included in the items) complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

15mm (fifteen milimeters)

20mm (twenty milimeters)

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete in all respect including carriage of all labour, equipments and material to various locations through all modes of transportation in all lead, lift and all other incidental charges.

Providing and fixing PTMT push cock with reducer of approved quality and colour (20 mm X 15 mm) (twenty milimeters into fifteen milimeters) size complete in all respect including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15 mm ( fifteen milimeters ) nominal bore fancy PTMT bib cock with flange of approved quality and colour complete in all respect including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying ( to level or slopes) 150 mm ( one hundred fifty milimetres ) dia high pressure PVC spigot and socket waste and ventilating pipe in tranches and jointing with approved adhesive complete in all respect including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for 150mm (one hundred fifty milimetres ) internal diameter stoneware pipes with necessary form work and curing complete in all respect including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels complete in all respect including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing manhole with reinforced cement concrete top slab 1:2:4(One cement: Two sand: Four graded hard stone aggregate 20 (Twenty) millimetres nominal size),foundation concrete 1:4:8(One cement isto Four sand isto Eight graded hard stone aggregate 40(Forty)millimeters nominal size inside plastering 15(Fifteen)millimeters thick with cement mortar 1:3(One cement isto Three sand)finished within a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (Twenty) millimeters nominal size) finished smooth complete including curing and testing as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads ,lifts and all incidental charges.

Inside size 800*800*500(Eight Hundred into Eight Hundred into Five Hundred deep) millimetres precst RCC cover with frameinternal dimensions 455*610 (Four Hundred Fifty Five into Six Hundred Ten) millimetres total weight of cover and frame to be not less than 38 kilograms (weight of cover 23 (Twenty Three) kilograms and weight of frame 15(Fifteen) kilograms. With 200(two hundred) millimetres thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(One cement isto Three sand)

Inside size 800 mm x 800 mm and 1000 mm (eight hundred into eight hundred milimeter) and (one thousand milimeter)deep including C.I cover with frame. (Light duty single seal pattern - 1) 455mmx610mm (Four Hundred Fifty Five into Six Hundred Ten) internal dimensions total weight of cover and frame to be not less than 38kg.(thirty iehgt kilo-gramme) (Weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kg.( fifteen kilogramme) :- With 200mm(two hundred milimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand).

Hira Singh Thakur