Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹98.9 L+₹3.6 L (3.72%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹1.0 Cr+₹8.8 L (9.22%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹87 L
EMD Value
₹1.6 L
Closing Date
30 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
PROVISION OF BATHROOM AND ALLIED WORKS AND ADDN ALTN OF ASSEMBLY SHED AT SAINIK SCHOOL IMPHAL
2023_MES_632458_2
8870/E8
Open Tender
Civil Works
Item Rate
180 days
Leimakhong
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 869 EWS
₹1.6 L
Yes
1 May 2024
27 Feb 2024
6 Apr 2024
27 Feb 2024
30 Mar 2024
9 Mar 2024
Amount
Surface dressing n.exc 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.
Excavating over areas, n. exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.
Excavating over areas, n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
.-Ditto all as per item no 4.00 above but depth exc 1.5m and not exc 3.0 m and ditto-.
Material and labour treating the backfill in contact with foundation at the rate of 7.5 litres of ATT chemical emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
Material and labour treating the top surface of filled earth at the rate of 5 litres of ATT chemical emulsion per square metre of surface complete all as specified and as directed.
Material and labour for treating the soil under plinth protection at the rate of 5 litres of ATT chemical emulsion per square metre of surface area complete all as specified and as directed.
Material and labour for Treating the soil along with external perimeter of building at the rate of 2.25 litre of ATT chemical emulsion per metre of the perimeter wall complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Material and labour for hardcore of broken stone / boulder gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Materials and labour for loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc, laid in panels and finished the surface even and smooth without using extra cement including necessary formwork to edges and filling of joints with bituminous sealing compound complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for foundation and plinth beams etc complete all as specified and directed.Note :- Reinforcement and form work required shall be measured Note :-(i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.
Material and labour for Reinforced cement concrete (design mix) in M-25, (20 mm graded aggregate) in columns/pillars complete all as specified and directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note- (i) Reinforcement shall be measured and paid seperately under respective items. (ii) Design mix will be approved by GE.
Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 5mm dia and over and upto and including 10mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 6 to 8mm dia , cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Materials and labour for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and as directed.
Materials and labour for use and waste of form work to pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular, or polygonal surfaces of concrete complete all as specified and as directed.
Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished flat surfaces of concrete complete all as specified and as directed.
Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: n.exc 200mm thick (Horizontal or sloping) for flat fair finished surfaces all as specified and directed.
Material and labour Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removing excavated material to a distance exc 50M but n. exc 100M and deposited where directed complete all as specified and as directed .
Removing excavated material to a distance n.exc 50M and deposited where directed complete all as specified and as directed .
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and as directed.
Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
Materials and labour for 15 mm thick rendering on fair faces of brick work mixed with water proofing compound @ 3% by weight of cement content in cement mortar (1:4) on wall and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items.
Materials and labour for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) and finished the surfaces even and smooth using extra cement complete all as specified and as directed.
Materials and labour for 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for 5mm thick rendering on ceiling surface in cement mortar (1:3) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound (WPC) of best quality complete all as specified and as directed.
Materials and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon aditives @ 1.43 litre / 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new wall surface complete all as specified and as directed.
Materials and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
Material and labour for Preparation newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.
Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base floor and finish the surface fair and even complete all as specified and as directed.
Material and labour 40mm thick plain cement concrete type B 1, 1:2:4 (20mm graded stone agg) as in flooring including necessary formwork finishing cement concrete surface even and smooth ( Without using extra cement) complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour for coloured glazed ceramic tiles in vertical surfaces 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed with coloured cement over a cement screed in CM 1:4, 10mm thick as in dados complete all as specified and directed.
Supply and laying outer diameter 16mm CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on wall / ceiling or laid in floor complete all as specified and directed.
Supply and laying outer diameter 20mm CPVC pipes SDR 11 with and including plain CPVC SDR 11 fittings on wall / ceiling or laid in floor complete all as specified and directed.
Supply & fixing 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes, complete all as specified and as directed.
Supply & fixing 15mm bore stop valve fancy type, chromium plated with long shank and cup (concealed type) , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
Supply & fixing 15mm bore angle valve fancy type, chromium plated with long shank and cup (concealed type) , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
Supply & fixing gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Supply & fixing ball brass valves 20 mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Supply & fixing pillar taps 15mm dia bore fency type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
Supply, hoisting and fixing water storage tank capacity 1000 liter in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top),including providing all necessary connections complete all as specified and as directed.
Supply and fixing PVC connections 15 mm dia, 450 mm long with PTMT nuts complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints laid in floor or laid in trenches complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints fixed to wall complete all as specified and as directed.
Supply and fixing stack clamp for 110 mm bore of pipe made out of 50 x 5 mm FI and 16 mm dia round iron stays including nuts, bolts etc . The ends to be secure in wall properly with cement grouting complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, laid in trenches or laid in floor complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) bends with access door in any types.complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed.
Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.
Supply and fixing Chromium plated health faucet with 1.50mtr metalic expandable tube & hook one complete all as specified and directed.
Supply and fixing CP soap dish complete all as specified and as directed.(Prayag model No Cat no BA -05 or equivalent make.
Supply & fixing brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified andas directed.
Supply and fixing 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.
Supply and fixing vitreous china wash basin white, flat back of size 550x400 mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed .
Supply & fixing Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet and reinforced with MS square tube complete all as specified and as directed.
Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR Part-II, 2020 complete all as specified and as directed.
Material and labour 20 mm thick granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admiture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Supply & fixing 100mm long aluminium anodized barrel tower bolts of extruded section.complete all as specified and as directed.
Supply & fixing 200mm long aluminium anodized barrel tower bolts of extruded section.complete all as specified and as directed.
Supply & fixing 200mm size extruded aluminium alloy handles, cast type anodized.complete all as specified and as directed.
Supply & fixing 100 mm size Butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
Supply and fixing 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed.
Supply and fixing shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (min weight 40 gms) complete all as specified and as directed.
Supply and fixing grating doom, 100 mm dia, PTMT (min weight 25 gms) complete all as specified and as directed.
Supply and fixing grating doom, 125 mm dia with waste hole, PTMT (min weight 40 gms) complete all as specified and as directed.
Supply and fixing vitreoues china white wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, front or back inlet, fixing bolts with coloured PVC seat cover and making all necessary connections complete all as specified and directed.
Supply and fixing casement handle made out of zinc alloy(white powder coated) for UPVC casement window complete all as specified and directed.
Material and labour for water proofing treatment on RCC roof etc comprising with the following operation and as specified :- (a) Applying 15 mm thick plastering in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished even and smooth . (b) Preparation and cleaning fully dried cement plastered surfaces. (c) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm confirming IS-3384-1986. (d) A layer of APP based polymeric membrane 3 mm thick (minimum), weighing 3.00 Kg per Sqm reinforced with polyester non woven fabric (weighing not less 150 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction. (e) One coat of aluminium paint over the APP based membrane @0.11 Kg/Sqm.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as floor finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed.
Materials and labour for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as in cover slab for manholes, drains etc, set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
Supply and fixing 150mm bore dia reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified and directed.
Materials and labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) for 150 mm dia pipe complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.
Supply and fix 100 mm dia cast iron soil waste and vent pipe in any length with or without ears with cement joint laid in trenches complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- A complete all as specified and as directed.
Supply and fixing mild steel framed work such as grills, gratings etc. with ornamental and intricate design for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply and fixing steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed .
Supply and fixing framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.
Material and labour screw bolts 15 to 20 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 22.50 cm and n.exc. 30 cm long complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Material and labour for galvanised steel water tubing, medium grade, 50 mm bore with all fittings laid in trenches and testing on completion complete all as specified and directed.
Material and labour for galvanised steel water tubing, medium grade, 25 mm bore with all fittings laid in trenches and testing on completion complete all as specified and directed.
Material and labour for Gun metal gate / globe valve, 50 mm bore confirming to IS781-1984 with iron wheel head screwd both ends for iron pipe including testing on completion complete all as specified and directed.
Material and labour for Gun metal gate / globe valve, 25 mm bore confirming to IS781-1984 with iron wheel head screwd both ends for iron pipe including testing on completion complete all as specified and directed.
Material and labour for cutting of existing 250 mm dia water main for insertion of new Tee, branch etccomplete all as specified and directed.
Material and labour for point wiring concealed in wall / ceiling for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC rigid conduit of suitable size with all accessories and shall be terminated to modular metal flush boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) Modular boxes shall be measured and paid separately.
.-Ditto- all as per item No 114.00 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-.
Supply and fixing modular switch 1 way 6A, 1 module complete all as specified and as directed.
Supply and fixing modular switch 1 way 16A, 1 module complete all as specified and as directed.
Supply and fixing modular socket outlet, 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.
Supply and fixing ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.
Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed.
Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed.
Supply and fixing modular metal flush box, 6 module complete all as specified and directed.
Supply and fixing modular metal flush box, 3 module complete all as specified and directed.
Supply and fixing of MCB DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.
Supply and fixing of MCB DB SPN 4 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.
Supply and fixing of MCB 40 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing of MCB 6-32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing of MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Note :- MCB and MCB DB being incorporated in the work shall be of same make.
Supply and fixing for 300mm sweep size metalic body exhaust fan with louvers, AC, Single phase 230/240 volts, 1400 RPM and connecting to celling rose with twin core 0.75mm flexible copper conductor wire/cable after and including cutting / making opening of walls and making good the disturbed surfaces as per the existing internally and externally complete all as specified and as directed.
Supply & fixing, IP >= 20, Class I, LED light fitting 1 x 20 W (4 FT), CRI >= 80, CT >= 5700 K, wall / surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Cat No ENDURALINEARNEOBS20WLED840SPCWH of Havells or equivalent make as mention in list of approved make in PS.
Supply & fixing, IP >= 10, Class I, LED light fitting 1 x 10 W (2 FT), CRI >= 80, CT >= 5700 K, wall / surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Cat No ENDURALINEARNEOBS10WLED840SPCWH of Havells or equivalent make as mention in list of approved make in PS.
S&F energy saving high power LED building security light of 30W made up of pressure die cast aluminium housing with embedded PC cover having TOP opening seperate driver compartment with IP66 protection including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as directed. Make : Cat No ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD Endura pearl of Havells or equivalent make as mention in list of approved make in PS.
Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose)
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 16 Sqmm 2 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 6 Sqmm 2 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit of adequate size of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing and testing PVC insulated aluminium conductor cable, 1100 Volt grade, heavy duty served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed, two single core stranded conductor flat or circular, 4 Sqmm, 2core nominal cross sectional area, as in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia. suspension wire complete all as specified and as directed.
M/S PRADEEP CONSTRUCTION
Manipur Steel Industries(INDIA)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .