WBPWD/AE/AESD-II /eNIQ-20/2024-25

Amount

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2 +8 Way Make Legrand, Siemens, Crabtree, Schneider

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP 6-32A

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. DP 40 A

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] a)Avg. Run 6 mtr

b)Do-Do – on board 5A 3/5 pin plug point

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F suitable size switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 13mm dia 3mm thick Polythene Pipe

19mm dia 3mm thick Polythene Pipe

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. Make KEI, Polycab, Havells a) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (From HTPN DB to SPN DB)

b) 2X36/0.3(2.5 SQMM)+1*22/0.3(1.5SQMM) as ECC (For Power Plug & Computer Point)

c) 3 X 22/0.3( 1.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 6 sq.mm.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying and Fixing single arm header fabricated with 100 mm dia G.I. pipe (pole cap) of 10" height welded with 1 no. 1.5 m long 40 mm dia. G.I. pipe at an suitable angle incl. S / F nuts, bolts washer etc incl. painting as per direction of EIC.(for exiting ane new pole)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 10ASPMCB with connecting channel etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. 200 x 150 x 100mm

Supply & Delivery 1.1 KV grade LT Aluminium PVC/XLPE Armoured cable ( Make:- Havell's /Polycab/RR Kabel/KEI) as per direction of EIC. The cable shall conform to IS 7098/Part I with anti terminate and anti rodent features. 2 Core 6 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying one cable upto 50sqmm through GI Pipe for single,2,3,4 core

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply & Delivery of 240 V, 70 W LED Street Light Fittings. (Philips/Crompton/ ANCHOR-PANASONIC/Century LED). Manufacturer's warranty should be not less than five years.

Fixing only street light Fittings on the top of the pole with necessary nuts and bolts.

Supply and Delivery compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (i)2 core 6 sqmm

supply and delivery solderless socket (Dowels make) for Finishing the end of following XLPE/PVC armoured cables i)2 core 6 sqmm

Excavation of soil for installation of Earth Electrode and filling & ramming. - Morrum soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of 6 SWG size on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

S&F of 250V Timer DB (equivalent to 2+6 way SPN DB L&T in size)with double door sheet steel enclosure,neutral bar , din rail,with IP43 protection comprises with 20/25A DP MCB (C-curve 10 ka) (make L& T) and 1 no 24 hr. Analog time switch ( make L & T) and 1 nos MNX 18 Power contactor complete with internal wiring with suitable size of copper wire including 1 no toggle switch and LED indicator ( RED & GREEN) and earthing attachment as per direction of EIC. [NS]

Supplying and fixing 240V,32A Sheet steel Main Switches on flat iron frame on wall(make-as per choice of EIC

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Add 18% GST

Add LWC @1% On total from item no 1to35

SASTIK ENTERPRISE (BID ID -6225878)

KOUSHIK MONDAL (BID ID -6234738)