REPAIR TO TILING, PLUMBING AND SANITARY FITTINGS AT OTM/JCOS/OR ACCN UNDER GE (MCTE) MHOW

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Virified Ceramic tiles 10 mm thick dark shade double charged/ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Granite 25 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F in repair 110 mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified.

S & F 15 mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings complete all as specified and directed. Note:- GI pipe shall be reused, received under Item No.54 here in above.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified.

S & F 20 mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

S&F for laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required

S&F PVC (SWR) pipe 75 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge .

M&L preparation of complete removal of existing treatment of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 mm thick wall putty all as directed by Engr-in-Charge .

S&F in repairs Mortice lock,vertical type of size 100 mm with brass body 4 lever complete all specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No 3 , universal type, suitable for door shutter up to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified.

M & L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Taking down Chowkats or frame with shutter (without taking off shutters from the frame) exc. 1.5 sqm but exc 4.0 sqm each

S&F powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5 mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15 mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5 mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings , accessories etc ll as specifed and directed by Engr-in-Charge. .

M&L for 5.5 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works complete all as specified and directed.

M & L Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall.

M & L for two coat of synthetic enamel paint on surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

M & L 6 mm thick Fibre Cement Designer Ceiling Tile, (High Pressure steam cured), pre-painted , self -embossed , reinforced Everest designer cemetn boards (Ivory Colour) of Oceanic/Lake & Hill/Electra/Cascade texture , conforming to IS 14862: 2000 Category 3 Type B, having Density 1200kg/m3, miniumm module of Rapture greater than 10 Mpa and Compressive strenght 38.23 Mpa.

S&F Urinal Pot of size 245 x 320 x 560 mm Half Stall white colour .

S&F Urinal Pot of size 245 x 320 x 560 mm Half Stall Ivory colour .

S&F vitreour china wash basin of size 480 x 370 x 130 mm fitted to table top .

S&F in repair Brass Urinal Spreader .

S&F in repair Brass Bottle Trap of size 300 mm (12") .

S&F in repairs PVC Type 'S' / 'P' Trap 100 mm size round moulted fitted to Vitreous china, wash down water closet pan (pedestal pattern) all as specifed and directed .

S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook .

S & F under counter ivory wash basin, vitreous china size 560x410x180 mm including cutting for and pinning in ends of brackets or erecting stand but incl wastecoupling and brackets , fixing of supply and waste pipe, Rag Bolt Assy 3/8 " complete all as specified and directed.

S&F in repair pillar cock swan neck (T/M).

M&L for providing PVC WALL PANELLING of 5 mm thick consisting of panel of desired size stuck on inner frame work of 50 mm wide strips of 5 mm thick prelaminated PVC sheet . The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company . The strips should have in their centre a gove of 6mm widht and 1 mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips .The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200 mm . A groove of 2mm may be left at the joint of two panels for aesthetic looks . The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5 mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement .

S&F 12 mm Toughened Glass Panel door , frosted with monogram of any design /description as directed by Engr-in-Charge , including all necessary fittings , accessories , and SS Handles on both sides of doors all as specifed and directed by Engr-in-CHarge .

S&F powder coated aluminium sliding window three track with two glass shutters using 5 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complte fittings.

M & L in fixed in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

M/s Shree Ganesh Traders