Modification to 30 Gate Entrance of Aircraft Division, HAL BC Including Civil, Electrical and Allied Works

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

TIN number

PAN no and Name of Holder

PF number (If any)

ESI number

Service Tax Registration No

Goods and Service Tax ID No.

SAC Code

Contact details

Registered Contractor

Pls Enter

Need to Fill Column 19

Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

Pls enter Finiancial Turnover in Rupees for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Name of Organization with address

Balance Work On Hand

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Quantity of work Excuted during the last three years

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Bank Statement for past three month

Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

#VALUE!

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

work done

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

#VALUE!

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

Pls enter

Tender Document Cost and EMD details

Enclosed / Not enclosed

Enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2023 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

Specification

Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL, etc., all complete as per directions of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as per directions of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, etc., in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as per directions of Engineer-in-Charge.

Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth, sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer, etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, etc., all complete as directed by the Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:4:8) of required thickness using 40mm down graded hard stone / granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing up to floor five level precast cement concrete solid block of 200mm/100mm with ordinary mix ratio of 1:1½:3 for walls at all levels, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) and along with necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by the Engineer-in-Charge.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above / below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.

Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330Kgs/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as per directions of Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

All works upto plinth level like footing, pedetsal, piles, plinth beam including necessary openings and packing if any for laying pipes, cables, etc.,

All works above plinth level column, beams, slabs, canopy, chajja, stairscase, etc., level including necessary openings and packing if any for laying pipes, cables, etc.,

Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing, etc., all complete as directed by the Engineer-in-Charge Note: Formwork material is contractor's own property and shall be removed after completion of work.

Foundations, pile caps, footings, bases of columns / pedestal, for mass concrete, etc.,

For Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Providing and fixing expansion hold fasteners on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., complete as per direction of Engineer-in-Charge.

Fastener with threaded dia 6mm each

Fastener with threaded dia 10mm each

Providing and fixing Second Class Teak wood for frames of doors, windows, hand rails, frame work for partitions, etc., cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., complete as per direction of Engineer-in-Charge. (Fastners/hold fasts/SS Screws to be paid separately)

Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand/make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.10Sq m with 6mm thick clear heat strengthened glass, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing panelling 5.0mm thick glass panes (weight not less than 12.50 Kgs / Sq m) or glazing in panelled or glazed shutters 25mm to 40mm thick for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock with min. 4 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc.,

Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary.

Providing and fixing M.S. grills with made of M.S. flats, square or round bars to openings of required pattern / frames of windows with rawl plugs screws, etc., including priming coat with approved steel primer all complete.

Providing and fixing 5.0mm thick glass panes for doors, windows and clerestory window(weight not less than 12.50Kgs/Sq m), including cutting an dfinishing as per site requirement, etc., all as per the instructions of Engineer-in-Charge.

Providing and fixing mild steel round holding down bolts with nuts and washer plates, etc., complete all as per the instruction of Engineer-in-Charge.

Providing and laying Glazed vitrified floor tiles Matt/Antiskid finish of Size [600 X 600]mm as indicated below for Paper Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kgs / Sq m including grouting the joints with white cement and matching pigments, etc., all complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles using various sized tiles (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.30Kgs / Sq m including grouting the joint with white cement & matching pigments, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of approved brand, on wall / floor including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as per direction of Engineer-in-Charge.

Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as per direction of Engineer-in-Charge.

Plastering to ceiling with 12mm thick on the rough side with cemnet mortor (1:4) including leveling, curing and making the level smooth and at all heights and execute the work, etc., all complete as per direction of Engineer-in-Charge.

Plastering to external brick / block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as per direction of Engineer-in-Charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams / Litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as per direction of Engineer-in-Charge.

Providing and finishing old walls in two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 Ltr / 10 Sq m over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as per direction of Engineer-in-Charge.

Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 Ltr/10 Sq m over and including priming coat of exterior primer applied @ 2.20 Kgs/10 Sq m) including scrapping, preparationof surface for completing the work as per direction of Engineer-in-Charge.

Providing and applying synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in One or more coats on old work by cleaning and srcapping to make the surface smooth before appling paint, etc., all complete as per direction of Engineer-in-Charge.

Providing and applying synthetic enamel paint for pipes, grills, Gates in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, filling joints, patti, etc., all complete as per direction of Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I./CPVC pipe including stacking of dismantled pipes (within 50metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as per direction of Engineer-in-Charge.

Fixing chowkhat in existing opening in brick / RCC wall with dash, fasteners / Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners / chemical fastener, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass hard drawn hooks (coat hooks) and eyes of 300mm size, etc., all complete as per direction of Engineer-in-Charge.

Dismantling dressed stone work in cementt mortor of ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead or stacking at suiatble location, etc., all complete as per direction of Engineer-in-Charge.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, stacking serviceable and unserviceable material separately including cutting reinforcement bars, after making temporary proetction for existing service lines, etc., all complete as per direction of Engineer-in-Charge.

Demolishing brick work with cement mortar manually / by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, etc., all complete as per direction of Engineer-in-Charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50metres lead as per direction of Engineer-in-Charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material and disposal of dismantled materials up to a lead of 10kilometre outside HAL, after making temporary proetction for existing service lines, etc., all complete as per direction of Engineer-in-Charge.

Dismantling steel work in built up sections in M.S.Gate works, Shed like angles, tees, flats, grills, ventilators, windows and channels including all gusset plates, bolts, nuts, cutting rivets, welding, memebers embeded in concrete, etc., including dismembering and stacking within 50metres lead, etc., all complete as per direction of Engineer-in-Charge.

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of of 450mm dia and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine, etc., all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). All works to be completed as per direction of Engineer-in-charge. Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and EPDM rubber / neoprene gasket, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator, louvers, shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 Kgs / Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing toughened glass panes of 12mm thickness glazing in aluminium door, window, ventilator, shutters and partitions along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge.

Designing, supplying and installation of Funder max 6mm thick Exterior grade F-quality panels of standard size with both exterior décor. Funder max exterior panels are durometer high pressure laminates (HPL) as per EN 438-6 type EDF manufactured with norm confirmity of EN-438-7 using patented NT technology (NT is non fading high performance acrylic ployurethane surface technology). Panels will be double hardened including acrylic polyurethane resign and thermally cured under high pressure. These panels will have CE-mark necessary for their use in building applications. Installation of Funder Max Panels will be done by MBE rivets (with fixed and sliding points) with recommended Aluminium T-sections of size [100 X 50 X 2]mm and L- sections [50 X 50 X 2]mm held by Aluminium wall brackets with wind load and dead load slot as per design, anchored by standard anchor fasners along with thermal seperators. Installation of fundermax panels will be done using rear ventilated principles only, which will be done using rear ventilated principles only, which is ensured by providing ventilated principles only which is ensured by providing ventilated gap minimum 200 Sq cm / per meter (for free flow of air behind the facade) for the facadeusing the frame work with no horizontal section. Rate shall include supply of main exterior panels, Aluminium MBE rivets (germany), supply of Aluminium substructure (brackets, L& T Sections), installation charges, wastage , scaffolding (double staging as per site condition), necessry power, etc., The cost is for complete installation including transportationand double scaffolding system with cuplock type upto the required height and finishing work all as per the instrcution of Engineer-in-Charge.

Rendring 3D drawings for HAL issued 2D drawings for old Airport Road 30Gate area / Entrance area witj (Min 3Nos of 3D drawing along with one revision and correction, if required), etc., all complete as per direction of Engineer-in-Charge.

Supplying, Fabricating and fixing stainless steel sliding gate with motorisation of approx. size [7.50 X 3.0]mtr and wicket gate of approx. size [1.80 x 3.0]mtr including fixing Archidlam Ext wooden Decor panel of size [1300 x 2800 x 6]mm thick with Archidlam rivets similar shade of Archidlam panel and 3mm thick SS CNC for gate name above the HPL.All the associated work, etc., all complete as per direction of Engineer-in-Charge. Note: 1.Note:Shop drawing to be submitted by agency before placing order for materials. 2.Payment for supply fo motor and making it operational will be paid separately. 3.Supply and laying Electrical cable will be paid separately.

Supply of Singlephase 230v motor 50hz. Off 200watts self locking and reversible Electro Mechanical geared motor housed in water proof Alu. Die-cast body having disengaging mechanism with motor control unit having Limit switches are fitted at the gate ends to limit the gate movements and using safety sensors and Inlcuding Supply of remote for operating motor and manual operating method during emergency, etc., all complete as per direction of Engineer-in-Charge. Make: HAL approved make or any other equivalent standard make motors. (Upto 2500Kg capacity)

Supply and fixing stainless steel 304 grade letters name"HINDUSTAN AERONAUTICS LIMITED" white acrylic front with LED lighting (75mm raising) of approx size 27feet X 1feet including all required accessories as per drawing, etc., all complete as per direction of Engineer-in-Charge.

Supply and fixing 3D HAL logo of 10mm laser cutting with 10mm clear sheet as per drawing, etc., all complete as per direction of Engineer-in-Charge.

Supply and fixing 40mm PVC router cutting with Du pont painting letters "HINDUSTAN AERONAUTICS LIMITED" on 1- inch M.S.Frame for approx size [34 X 1.25]feet as per drawing, etc., all complete as per direction of Engineer-in-Charge.

Supply, fixing directly to the ceiling/wall using suitable mounting arrangements testing & commissioning of Out door surface mounting Decorative type Pergola 36 W LED(minimum) light fixture , including driver. The driver shall have PF >0.9 and Colour temperature shall be =>3000K, THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. Fitting shall be rated for IP65 complete in all respect for mounting in pergola as shown in the tender drawing and as directed by EIC. The lighting fixture shall be of model no: Philips SM294C LED40/840 PSU WP WH GM or Equivalent model in other approved makes meeting the technical parameters as above.

Supply, fixing directly to the floor using suitable mounting arrangements testing & commissioning of Outdoor type minimum 8 W LED, 400Lumens Bollard light fixture including driver. The light fixture height will be around 800MM having IP65 /IK10 rating, easy to install with base plate . The driver shall have PF >0.9 and Colour temperature shall be =>3000K, THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections complete in all respect and as directed by EIC. The lighting fixture shall be of model no: Philips BCP151 LED150/WW PSU 220-240V 7043 or Equivalent model in other approved makes meeting the technical parameters as above.

Supply, fixing directly to the ceiling/wall/Floor using suitable mounting arrangements testing & commissioning of surface mounting Outdoor type minimum 50W LED linear 1000 MM lengths flood light luminaire suitable for architectural lighting applications including driver. The driver shall have PF >0.9 and Colour temperature shall be =>3000K, IP 66 rated THD <20% operating on single phase 230V voltage 50 Hz AC including necessary interconnections complete in all respect and as directed by EIC. The lighting fixture shall be of model no: Philips BCP383 M 24LED 30K 220V A2 L100 IN or Equivalent model in other approved makes meeting the technical parameters as above.

Supply, fixing directly to the ceiling/wall/Floor using suitable mounting arrangements testing & commissioning of Outdoor type IP 66 LED strips (minimum 50W, 6000Lumens for 5mts length) with reliable performance and excellently waterproof and anti-dust with professional design for vivid colors.The colour temperature shall be =>3000K. Strip to be connected to suitable driver which will be operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The LED strip shall be of model no: Philips BGC301 1100LM 3000K L6000 Equivalent model in other approved makes meeting the technical parameters as above. (Note: Strip will be measured in running meter. 2.Driver for required length will also be measured separately.)

Supply, fixing inside the existing Weather proof driver panel using suitable mounting accessories testing & commissioning of 150 W driver 24V Series Waterproof IP 67. The driver shall have PF >0.9 operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V and THD <20% including necessary interconnections complete in all respect and as directed by EIC. The Driver shall be of Philips or Equivalent make in other approved makes.(For LED strip Lighting arrangement)

Supply, fixing directly to the ceiling/wall/Floor 1000 mm long Aluminum profile suitable for LED strip light as specified in BOQ 4 above. The rate is inclusive of all other necessary mounting channel arrangements including clamp, fasteners, bolts, washers with all accessories complete in all respect and as directed by EIC and as required at site.

Design, fabrication, Supply, erection, testing & commissioning of Outdoor Type LT Panel -1 (PTTA) IP-54

Incoming

1No-100A, 415V gr. 16KA 4P MCCB with Thermo magnetic release.

Lot - 125A TP + 75A N, 415V, short circuit rated 16KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1 Set-100/5A current transformers of class 1 and suitable VA burden for metering.

1No 16A 415V gr TP 16KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoings:

4Nos - 32A, 415V gr. 16KA breaking capacity, TPN MCCB with Thermo magnetic release.

1 No - 25A, Contactor ML 1.5 +2NO+2NC

1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.

6 Nos -6A-32A SP 230V Gr, 10KA MCB with overload and short-circuit protection.

Suitable space and mounting arrangement including connectors for mounting LED strip drivers .(Note: Supply , installation, testing & commissioning of LED strip drivers have been covered under BOQ Sl no:4. Power supply to these drivers have to be tapped from above outgoing SP MCB's as per site requirement. Refer Panel SLD)

Design, fabrication, supply & installation of weather proof outdoor kiosk ,IP 55 type for installation of above LT panel (PTTA) BOQ SL.NO 7 mounted on MS angle frame work including supply of suitable size M.S angle/channel iron frame work fabricated out of 12 gauge sheet steel powder coated with 7 tank cleaning process with front lockable SS hinged door (Double door with padlock arrangement and tower bolt inside) and having all around working space of 150mm and canopy type top cover to avoid rainwater collection, complete as directed by Engineer-in-charge.

Supply and fixing of weather proof cable junction box with terminals of size 155 mm x 210 mm x 92 mm Hansel Cat. No. DK 1616 G or equivalent in Legrand/ Schneider/ Hagar make. The Box shall be mounted at suitable height on the pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge.

Carrying out Mechanized Horizontal directional drilling of soil under the existing road/gate way for laying 1run of 125mm dia HDPE pipe including supply and laying 1 run of 125 mm dia PE100 PN08 HDPE pipe of any ISI approved make conforming to IS 4984:1995 with ISI mark including suitable jointing using welding as required, providing pull tapes in the laid HDPE pipe, ends brought out, the brought out ends shall be sealed with suitable material to prevent soil and water entry and buried under soil. A cement concrete route marker shall be grouted in the soil above both the end of pipes with mark "End of pipe 1Rx125mm"complete as directed by Engineer in charge.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al)/ copper (Cu.) conductor 1100V gr., earthed Armored (Arm) U.G cables as directed and as per technical specification and as detailed below :-

Supply of 3.5CX 50 Sqmm Aluminium armored conductor

3CX 2.5 Sqmm Copper Armored LT Cable

Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., Aluminum/ Copper conductor XLPE insulated armoured LT UG cables by employing necessary glands, terminals( for aluminum cables aluminium terminal and for copper cables copper terminals), bolts & nuts etc., complete in all respects and as detailed below:

Supply of 3.5 CX 50 Sqmm Aluminium armoured conductor

3CX 2.5 Sqmm Copper armoured conductor

Supplying and fixing of Hot dip galvanized perforated type cable tray of size 225 mm Width X 50 mm Depth X 1.6 mm Thickness , Steel: As per IS:2062 / 1079, Galvanizing : As per IS: 2629 / 4759 including all accessories like base slotted angle, horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners, MS angle support at equal internal as per standard complete in all respect and as directed by OIC/EIC.

Supply and fixing on wall/ partition wall using necessary mounting arrangements for 105X100x50mm size DLP-PVC adaptable trunking system with separation partition for laying control/power cable and Data/Telephone cables/wires with full top cover, necessary accessories such as end caps, flat angle, T joints, external/internal angle, flat junction, Body joint, cover joint, required cabling accessories etc., complete in all respects as directed by Engineer-in-charge.

Supplying and laying of 50mm PN8, PE-100 HDPE pipe conforming to IS 4984:1995 with necessary connecting / welding sockets / couplings / Tees/Bends in the excavated trench/duct/at road crossings for encasing cables. Any reputed make with ISI mark. complete and as directed by Engineer-in-charge.

Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Supplying & laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.

Earth work in excavation all kinds of soil by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, refilling of same soil including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50m.

Concrete cutting/Chipping/Bitumen Road the existing 1:2:4 cement concrete road /pavements / flooring / rock/stone etc.,including disposal of material as per direction of Engineer in charge

Re-concreting the cut portion with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed.