Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance C2 03 AMEYA BUILDING SHREE GANESH CHS SECTOR 28 NERUL WEST NAVI MUMBAI 400033 | MUMBAI | MAHARASHTRA | 400033 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance MUMBAI THANE MAHARASHTRA | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical 11 RR YADAV COMPOUND MAHAKALI CAVE ROAD ANDHERI MUMBAI MAHARASHTRA 400093 | MUMBAI SUBURBAN | MAHARASHTRA | 400093 | Not Admitted-Fee/PreQual/Technical Others-FDR towards EMD is not pledged to PAY and Accounts Officer, DCSEM |
Tender Value
₹92.9 L
EMD Value
₹1.9 L
Closing Date
11 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chairman GB
3rd floor VS Bhavan
Civil Development work
2022_DCSEM_713659_1
DCSEM/CQD/QSB/ NIT/60/22-23/ dt.21.09.2022
Open Tender
Civil Works
Item Rate
183 days
Anushaktinagar
Please refer tender documents
5 documents required · 5 mandatory
₹0
₹1.9 L
23 Nov 2022
21 Sept 2022
14 Oct 2022
21 Sept 2022
11 Oct 2022
30 Sept 2022
21 Sept 2022 - 27 Sept 2022
Amount
ABSTRACT SHEET
Part A- Civil Works
Description of Work / Item(s)
Amount
PART A- CIVIL WORKS
Surface excavation not exceeding 300mm in depth including levelling and dressing of open area areas by filling depression with excavated earth and cutting wherever required. removal of vegetation, stone pieces, bricks, water papers, glass pieces, uprooting the wild vegetation bushes by manual labour and disposing surplus earth inside colony at desiganated place including loading, unloading, transporartion etc.complete all as per specification and as directed by the EIC.
Providing & laying rubble stone soling using spotless stones of consolidated thickness (150 / 230 mm) with stones vertically handset interstices packed with smaller stone chips, binding with murrum/crushed sand, watering, consolidating & finishing to required levels etc. complete all as directed by the Engineer-in-Charge.
Plain Cement concrete of (1:2:4) grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete as per specifications, drawings & as directed by the Engineer in charge.
Reinforced Cement Concrete of grade M-30 in foundation, plinth and super structure at all levels and locations conformining to I.S.456-2000 (latest) using 20mm. maximum size down graded stone aggregate including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing, scaffolding etc. all complete as per specifications and drawings and as directed by the EIC. (a) For all type of Structural / RCC Elements
Extra for providing RMC (Ready Mixed Concrete) confirming to IS :4926 (latest) in lieu of conventional RCC items supplied by approved RMC manufactures for all type of structural elements/ RCC elements including transporting, pumping, at all levels & locations etc. complete as per instruction of the Engineer in charge.
Providing, erecting, fixing in position striking/ removing and cleaning steel/ timber shuttering & centering for form work in foundation plinth, super structure at all levels & locations for all geometrical shapes in plain, curved surfaces of structural/ RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. all complete as per specifications, drawings and as directed by the Engineer-in-charge.
Reinforcement for RCC work including supplying, delivering, storing of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending, placing in position at all locations & levels and binding with18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. (Note:- The cost of binding wire shall be borne by the contractor and binding wire shall not be measured for payment.) (Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL, TATA STEEL and RINL only. )
Grouting the joint of existing stone pitching with cement mortar 1:4 (Using ready mix mortar of approved make) and pointing the surface with the same mortar including cleaning the existing voids of stone pitching & filling the new rubble chips whether required with necessary cement mortar 1:4 (Using ready mix mortar of approved make) at all levels and locations including curing, all labour materials etc omplete, disposal of debris at designated place inside colony all as per specifications and directed bythe Engineer-In-Charge.
Brick work at all levels & location using Ready mix cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous pointing below ground level, curing, scaffolding,etc. complete all as per specifications & as directed by the Engineer-in-Charge. (115 / 230 mm thick brick work)
Providing 20 mm thick sand faced plaster using Ready Mixed Plaster (RMP) of approved make for internal faces of brickwork/ concrete/RR wall, cable pits, trenches, chambers, steps, at all levels & locations etc. surfaces for all walls and beams flush with walls, mullions etc. including preparation of the surface even and smooth to correct line, level, plain & plumb including rounding if necessary at all lead and locations on slope, plain & curved surfaces, curing, cleaning, scaffolding, complete all as per specifications and as directed at site by the Engineer-in-Charge.
Providing and fixing in position at all floors, levels/ heights 18 mm thick mirror polished granite stones for riser & treads, seating gallery in single piece of approved shade, finished sizes as directed including machine cut/ hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb including wastage & disposal of debris etc. complete all as per specifications, drawings & as directed by the Engineer- in- Charge.
(i) 18 mm thick Jet black granite stone stone for riser in single piece upto 2.0m, fixing the stone with ready mix cement mortar (CM 1:4), 12 mm backing.
(ii) 18 mm thick brown granite stone stone for treads in single piece upto 2.0m,including 3 nos anti skid groove lines and moulding/rounding the exposed edge fixing the stone with ready mix cement mortar (CM 1:4), 20 mm backing.
(iii) 18 mm thick lavender grey granite stone stone for seating gallery flooring with moulded exposed edge, fixing the stone with ready mix cement mortar (CM 1:4), 20 mm backing.
Glass mosaic tiles 25 mm x 25 mm/20mmx20mm or of approved size, make, colour, shade & pattern fixed over 20 mm thick backing using ready mix cement mortar 1:3, close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage and final cleaning of surfaces as required, curing etc. complete all as per specification, relevant IS code & as directed by the Engineer In charge.
Providing and fixing in position at all levels & floors G.I. Chain link fencing of 4 mm dia wire and mesh size of 50 mm x 50 mm inluding cutting, wastage, fixing to GI pipe frame work by full welding and including scaffolding, two coats of synthetic enamel paint over one coat of steel primer of approved make and shade, etc. complete all as per specifications & as directed by the Engineer- in- Charge.
Providing and fixing in position the structural steel work at all levels & locations using M.S.sections of approved make such as ISMB, ISMC, Angle, Pipe, hollow rectangular & Square sections, flats, tee, square, bar, pipe, chequered plates, etc including cutting, wastage, welding, tools, labour, lifting, placing, transportation, loading, unloding etc and including two coats of synthetic enamel paint over one coat of steel primer etc complete all as per specification & as directed by the Engineer-in-Charge.
Providing and fixing in position the GI pipe work at all levels & locations using GI pipes of approved make etc including cutting, wastage, welding, tools, labour, lifting, placing, transportation, loading, unloding etc and including two coats of synthetic enamel paint over one coat of steel primer etc complete all as per specification & as directed by the Engineer-in-Charge.
Providing and fixing 60 mm thick (min.) factory made interlocking paver blocks manufactured by M/s. Super tiles or other approved make having approved colour, shade, size, shape of matt finished and anti skid lacquerd finish paver blocks of M-35 grade of footpath including supplying & laying 50 mm thick stone dust evenly spread over the sub base including consolidation of sub base properly, vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including disposal of debris at directed place within Anushaktinagar etc complete all as per specifications and as directed by the Engineer in charge.
Providing and fixing factory made precast cement concrete 1:2:4 kerb stones of size 125 mm wide and 375 mm deep (5" x 15") curved at inner edge of 25 mm radius manufactured by M/s. Super Tiles or other equivalent approved manufacturer including necessary form work, compaction, finishing, curing, fixing with CM 1:3, jointing and pointing in cement mortar 1:3 including earth work and 75 mm thick & 200 mm wide PCC 1:4:8 for foundation below kerb stone and including painting the kerb stones in pattern with two coats of flat oil paint of approved colour and shade over one coat of approved primer including preparing surfaces and cleaning etc. complete all as per specification and as directed by the Engineer in charge.
Providing and applying three finished coats of acrylic based emulsion exterior coating at all levels & locations using paint of Apex Ultima of M/s. Asian Paints / Excel of M/s. Nerolac/ Heatshield of M/s. Dr. FIXIT/ Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade including preparation & cleaning of surface including scaffolding etc complete all as per specifications and as directed by EIC.
Random rubble masonry at all levels & locations using spotless black trap or approved locally available stone using Ready mix cement mortar 1:4 including raking out joints, scaffolding simultaneous flush pointing using through bond stones at every 900 mm in horizontal & vertical courses of each layer, including PVC pipe 75 mm dia weep hole at 1.5m c/c in horizontal & in vertical, curing, scaffolding etc. complete all as directed by the Engineer-in-Charge.
Using stones supplied by department
Using stones supplied by Contractor
Raised & Cut pointing to RR masonry wall with cement mortar 1:3 at all levels & location including racking out joints, pointing neately and finishing the joints, curing scaffolding etc., complete all as per specification, drawing and as directed by the Engineer-in-Charge.
Dismantling existing PCC / Bitumen Road / WBM / RCC /Brick wor k/ RRM etc carefully including cutting of reinforcemetn bars at all floors and levels by using electrical jack hammer / manually without damaging existing structure, including finishes waterproofing etc. stacking serviceable materials and removing the debris in gunny bags and bringing down through staircase and disposing off debris inside colony at directed place etc.complete all as directed by the Engineer-in-charge.
Providing & fixing vollyball net as per standard size (generally 10 m X 1m) & pattern, made out of heavy quality synthetic nylon thread of black colour with 10 cm mesh size and of approved make & brand etc complete all as per specifications and as directed by EIC.
Providing & fixing fibre glass antenna of 10 mm dia and 1.80 m long for volly ball court as per standard size & shape of approve manufacturer etc complete all as per specifications and as directed by EIC.
Providing & laying interlocking kabaddi mat made of JSR ( Japenese Synthetic Rubber) in size (1m X 1m) having thickness 30 mm manufactured by M/s. Grip International or approved equivalent, in red & green colour as per approved pattern & design, mat made of 100% fresh material, light weight and comfortable for playing kabaddi, easy to clean, water resistant, non-slippery surface, having standard width & colour of bonus, baulk, mid & end line marking over mat etc complete all as per specifications and as directed by EIC.
Painting the concrete base of vollyball court using two or more coats of first quality approved colour & shade Glossy Synthetic paint manufactured by M/s. Asian Paints or equivalent approved manufacturer, suitable for application over sports court base including one coat of approved primer, filling cracks & surface of concrete surface with approve sealing & filling compound and including water jet cleaning of surface before application of paint, marking standard lines for vollyball court etc complete all as per specifications and as directed by EIC.
Labour charges only for structural steel frame work using G.I & M.S.sections such as hollow rectangular & Square sections angles, flats, tee, square, bar, pipe etc including cutting, wastage, welding, tools, labour, loading, unloading & transporation within Anushakti Nagar colony including two coats of synthetic enamel paint over one coat of steel primer and including fixing the frame, as per site condition etc complete all as per specification & as directed by the Engineer-in-Charge.
Structural steel work with old structural steel members & G.I. pipes supplied by Department.
Avtar Interiors Pvt Ltd
M/s SRV Construction Co.
Pal Buildcon
Avtar Interiors Pvt Ltd
M/s SRV Construction Co.
Pal Buildcon
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .