SPECIAL REPAIR TO ROAD IN AJAYMERU DAD RESIDENTIAL COLONY OF PCDA (ARMY) UNDER GE (S) JAIPUR MIL STATION

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surface not exceeding 50mm deep and area not exceeding 400 Sqm complete all as specified and directed

M&L for Preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly primer/tack coat with bituminous primer using paving bitumen @ 5kg/10 Sqm etc, complete all as specified and directed

M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying priming/tack coat with bituminous primer (VG-10) viscosity grade @ 5 Kg per 10 Sqm etc and laying bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by Accepting Officer. (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 50/- per Kg and no adjustment shall be made if the bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt.

M&L for premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or less) with paving bitumen 4% binder (viscosity grade VG-30) contents etc, complete all as specified and directed. NOTE:- (i) Work shall be executed as per designed mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 50/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar etc, complete all as specified and directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc, complete al as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified and directed.

M&L for Brickwork with subclass `B' bricks (old size), straight or curved on plan exceeding 6m mean radius, built in CM (1:6) etc, complete all as specified and directed

M&L for Rendering 15mm thick on fair face of brick masonry surface or concrete surface in CM (1:6) finished even and smooth without using extra cement etc, complete all as specified and directed

Providing, cement concrete 1:2:4 type C1 (20mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base etc, complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade with grey cement and no pigment etc, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade with grey cement and no pigment but without interlocking tile etc, complete all as specified and directed. (Note : Old tile shall be used)

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F cat eye standered quality solar stud aliminium alloy and PC construction solar powered by monocrystal solar panel type battery one high capacity Nicd rechargable battery, view distance approx 1000 mtrs, LEDs 010 mm, 3 PI model No. SE 501 (M/s Sun traders or DA dark Eye and TATA VPI or equivalent as approved by GE)

M&L preparing of new concrete/plastered surfaces and applying two coats of synthetic enamel paint over one coat of primer etc complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc, width not exceeding 10cm wide on roads, pavements with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity etc, complete all as specified & directed.

Schedule of Credit

ANKIT BUILDERS